NCP433FCT2GEVB_TEST_PROCEDURE.pdf

Test Procedure for the NCP432FCT2GEVB Evaluation Board
1.
2.
3.
4.
5.
6.
7.
8.
3/10/2014
Set EN = GND
Connect 3.2 V between IN and GND
Check Vout = 0
Set EN = 2V
Check Vout = Vin
Set EN = GND
Check Vout decreases down to GND
Disconnect Vin
1
www.onsemi.com

Open as PDF

Similar pages: NCP433FCT2GEVB_SCHEMATIC.pdf - 14 KB; NCP333FCT2GEVB_TEST_PROCEDURE.pdf - 6 KB; NCP451FCT2GEVB_TEST_PROCEDURE.pdf - 12 KB; NCP334FCT2GEVB_TEST_PROCEDURE.pdf - 11 KB; NCP434FCT2GEVB_TEST_PROCEDURE.pdf - 11 KB; NCP456RFCCT2GEVB_TEST_PROCEDURE.pdf - 11 KB; NCP340MUTBGEVB_TEST_PROCEDURE.pdf - 11 KB; NCP330MUTBGEVB_TEST_PROCEDURE.pdf - 11 KB

NCP433FCT2GEVB_TEST_PROCEDURE.pdf - 11 KB