A A V V ELECTRONIC LOAD REGULATED DC SUPPLY Test Procedure for the NCP57302DSADGEVB Evaluation Board Figure 1: Test Setup Test Procedure: 1. 2. 3. 4. 5. 6. 7. 8. 9. Connect the test setup as shown in Figure 1. Apply an input voltage, Vin = 2.5 V dc Apply Iout = 10 mA load. Check that Vout is 1.5 V Increase Iout load to 3.0 A Check that Vout is 1.5 V Power down the load Power down Vin End of test 11/8/2012 -1- www.onsemi.com