ID-XH30M-1W

ID-XH30M-1W Series
1W,FIXED INPUT,
3000V
DC ISOLATED & REGULATED TWIN OUTPUT DC-DC CONVERTER
INPUT,3
000VDC
PRODUCT PROGRAM
Input
Part
Number
FEATURES
Available inputs:5,12&24VDC
Output
Voltage(VDC)
(Vo1 & Vo2)
Voltage
Efficiency
Current(MA)
(%,Typ)
Nominal
Range
(VDC)
ID050303XH30M-1W
5
4.5-5.5
3.3
100
10
62
ID050505XH30M-1W
5
4.5-5.5
05
152
15
64
ID120303XH30M-1W
12
10.8-13.2
3.3
100
10
62
ID120505XH30M-1W
12
10.8-13.2
05
152
15
65
ID240303XH30M-1W
24
21.6-26.4
3.3
100
10
62
ID240505XH30M-1W
24
21.6-26.4
05
152
15
65
Max
Min.
◆
Available outputs:3.3&5VDC
◆
Electrical Specifications (Typical at +25℃, nominal input voltage, rated output current unless otherwise specified)
SIP7 package
◆
Temperature range: -40℃~+85℃
◆
COMMON SPECIFICATIONS
3KVDC isolation
◆
Item
Test Conditions
Min.
Typ.
Max.
No Heat sink required
Storage humidity range
No external component required
Operating temperature
-40
85
Storage temperature
-55
125
◆
◆
◆
Industry standard pinout
◆
RoHS Compliance
Temp. rise at full load
Derating
15
1
②Input Voltage
④The 2nd Output Voltage
⑥3KVDC isolation
⑧Rated Power
S
Free air convection
Case material
Plastic(UL94-V0)
Weight
①Product Series
③The 1st Output Voltage
⑤Fixed Input
⑦Mini SIP7 Package Style
℃
See graph
Cooling
①
②
③
④ ⑤
⑥
⑦
⑧
ID 05 05 05 X H30 M -1W
%
25
Short circuit protection*
MODEL SELECTION
Units
90
2.5
g
*Supply voltage must be discontinued at the end of short circuit duration.
ISOLATION SPECIFICATIONS
APPLICATIONS
Item
The ID-XH30M-1W Series are specially
designed for applications where a group of polar
power supplies are isolated from the input
power supply in a distributed power supply
system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply
is fixed (voltage variation ≤±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤3000VDC);
Test Conditions
Rated voltage
Typ.
Max.
Units
3000
VDC
MΩ
Leakage current
Tested for 1 minute and 1mA max
Isolation resistance (Vin/Vout)
Test at 500VDC
1000
Isolation resistance (Vo1/Vo2)
Test at 500VDC
1000
MΩ
Isolation capacitance(Vin/Vout)
80
pF
Isolation capacitance(Vo1/Vo2)
80
pF
OUTPUT SPECIFICATIONS
Item
Test Conditions
Max.
Units
1
W
Line regulation
±0.4
%
Load regulation
±0.3
%
75
%
Output power
MICRODC RESERVES THE COPYRIGHT
Min.
Min.
Typ.
0.1
Efficiency
60
Output voltage accuracy
Temperature drift
100% full load
Ripple & Noise*
20MHz Bandwidth
Switching frequency
Full load, nominal input
45
±1
%
±0.02
%/℃
50
mVp-p
KHz
*Test ripple and noise by "Parallel cable"method.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
ID-XH30M-1W Series
OUTLINE DIMENSIONS ＆ FOOTPRINT DETAILS
DERATING GRAPH
MECHANICAL DIMENSIONS
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch)
Diameter:1.00mm(0.039inch)
Unit:mm[ inch]
±0.10mm[
±0.004inch]
Pin sect ion tolerances:
tolerances:±
0.10mm[±
±0.25mm[
±0.010inch]
General tolerances:
tolerances:±
0.25mm[±
TUBE OUTLINE DIMENSIONS
FOOTPRINT DETAILS
7 PIN SIP
Pin
Function
1
+Vin
2
-Vin
4
+VOUT1
5
-VOUT1
6
+VOUT2
7
-VOUT2
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length (7 Pin SIP) : 20.47 (520mm ±2mm).
Tube Quantity :25
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
E-mail:[email protected]
Website:http://www.microdc.cn
REACH COMPLIANT INFORMATION
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2