NCV890131GEVB NCV890131 Automotive Grade High-Frequency Buck Regulator Evaluation Board User's Manual http://onsemi.com Description The NCV890131 evaluation board provides a convenient way to evaluate a high-frequency buck converter design. No additional components are required, other than dc supplies for the input and enable voltages. An external clock can be used to synchronize the switching frequency; and the board also provides a synchronization output, enabling it to be used as a master. It is configured for a 3.3 V output with a 2 MHz switching frequency and a 1.2 A maximum output current, over the typical 4.5 V to 18 V automotive input voltage range. In addition, the board regulates up to 32 V thanks to switching frequency foldback. EVAL BOARD USER’S MANUAL Key Features • • • • • • • • 3.3 V Output Voltage 2 MHz Switching Frequency 1.2 A Current Limit Wide Input Voltage of 4.5 V to 45 V Regulates through Load Dump Conditions External Clock Synchronization up to 2.5 MHz Synchronization Output Automotive Grade Figure 1. NCV890131GEVB Board Picture © Semiconductor Components Industries, LLC, 2013 February, 2013 − Rev. 0 1 Publication Order Number: EVBUM2171/D NCV890131GEVB Table 1. DEMONSTRATION BOARD TERMINALS Terminal Function VIN Positive dc input voltage GND Common dc return VOUT Regulated dc output voltage EN Enable input SYNCI Input for external clock synchronization SYNCO Output for synchronizing other boards Table 2. ABSOLUTE MAXIMUM RATINGS (Voltages are with respect to GND) Value Units Dc supply voltage (VIN, EN) -0.3 to 45 V V Dc supply voltage (SYNCI) -0.3 to 6 V V Junction Temperature (NCV890101) -40 to 150 °C Ambient temperature (Demo Board) -40 to 85 °C Rating Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 3. ELECTRICAL CHARACTERISTICS (TA = 25°C, 4.5 V ≤ VIN ≤ 32 V, VEN = 2 V, VOUT = 3.3 V, 0 ≤ IOUT ≤ 1.2 A, unless otherwise specified) Characteristics Conditions Typical Value Units 3.30 V 4 % Regulation Output Voltage Voltage Accuracy Line Regulation IOUT = 1.0 A 0.12 % Load Regulation VIN = 13.2 V 0.03 % Switching Frequency 2.0 MHz Soft-start Time 1.4 ms 1.8 to 2.5 MHz 1.2 A 1.55 A VIN decreasing 4.2 V TA increasing 170 °C Switching SYNCI Frequency range Current Limit Average Current Limit VIN = 6 to 18 V Cycle-by-cycle Current Limit Protections Input Undervoltage Lockout (UVLO) Thermal Shutdown http://onsemi.com 2 NCV890131GEVB Figure 2. NCV890131GEVB Board Schematic Operational Guidelines 1. Connect a dc input voltage, within the 4.5 V to 32 V range, between VIN and GND 2. Connect a load between VOUT and GND 3. Connect a dc enable voltage, within the 4.5 V to 32 V range, between EN and GND 4. Optionally, for external clock synchronization, connect a pulse source between SYNCI and GND. The high state level should be within the 2 to 6 V range, and the low state level within the -0.3 V to 0.8 V range, with a minimum pulse width of 40 ns and a frequency within the 1.8 to 2.5 MHz range. IOUT ZOUT VIN VSYNCI VEN Figure 3. NCV890131GEVB Board Connections http://onsemi.com 3 NCV890131GEVB TYPICAL PERFORMANCE Efficiency Figure 4. Efficiency at 2 MHz for a 3.3 V output Figure 5. Efficiency at 2 MHz for a 5 V output http://onsemi.com 4 NCV890131GEVB Regulation Figure 6. Load Regulation at 2 MHz for a 3.3 V and a 5 V output Figure 7. Line Regulation at 2 MHz for a 3.3 V and a 5 V output http://onsemi.com 5 NCV890131GEVB Start−up EN VOUT SW Figure 8. Typical start−up with VIN = 4.5 V, VOUT = 3.3 V and IOUT = 0 A Figure 9. Typical start−up with VIN = 4.5 V, VOUT = 3.3 V and IOUT = 1 A EN VOUT SW Figure 10. Typical start−up with VIN = 19 V, VOUT = 3.3 V and IOUT = 0 A Figure 11. Typical start−up with VIN = 19 V, VOUT = 3.3 V and IOUT = 1 A Load Transients VOUT SW COMP SYNCO Figure 13. Load transient 0.1 A to 1.2 A, with VOUT = 3.3 V and VIN = 36 V Figure 12. Load transient 0.1 A to 1.2 A, with VOUT = 3.3 V and VIN = 4.6 V http://onsemi.com 6 NCV890131GEVB Synchronization SYNCI SYNCO SW VOUT Figure 14. Starting synchronization at 2.5 MHz (from free−running) Minimum on time VOUT VIN 80 ns SW Figure 15. Minimum on time seen during a load transient http://onsemi.com 7 NCV890131GEVB Schematic http://onsemi.com 8 NCV890131GEVB PCB LAYOUT Figure 16. Top View Figure 17. Bottom View http://onsemi.com 9 NCV890131GEVB Table 4. BILL OF MATERIALS Reference Value Part # Manufacturer Description Package NCV890131 ON Semiconductor Integrated circuit 3x3 DFN10 7447785004 Wurth Inductor WE-PD-XS DFW MBRS1540 ON Semiconductor Diode, Schottky, 1.5 A, 40 V SMB DBST BAS16HT1 ON Semiconductor Diode, Switching, 200 mA, 75 V SOD-323 4.7 mF Murata Capacitor, Ceramic, 50 V, X7R 1210 U1 L1 CVIN1 4.7 mH CVIN2 1 mF Murata Capacitor, Ceramic, 50 V, X5R 0805 CDRV, CBST 0.1 mF Kemet Capacitor, Ceramic, 10 V, X7R 0603 ZFB1 4.7 nF Murata Capacitor, Ceramic, 50 V, X7R 0603 COUT1, COUT2 10 mF Murata Capacitor, Ceramic, 10 V, X7R 1206 CCOMP 330 pF Murata Capacitor, Ceramic, 50 V, C0G 0603 RCOMP 6.81 KW Vishay Resistor, 1% 0603 RFB1 100 W Vishay Resistor, 1% 0603 RFB2 31.6 W Vishay Resistor, 1% 0603 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative EVBUM2171/D