Bill of Materials for the STK681-360GEVB Evaluation Board Designator Quantity Description Value Tolerance Footprint Manufacturer Manufacturer Part Number C1 C2 R1 R2 R3 HIC JP1, 2, 3 TP1 to TP10 1 1 1 1 1 1 3 10 Vcc1 Bypass Capacitor Vcc2 Bypass Capacitor Pull-up Resistor Pull-up Resistor Resistor to Set Vref Hybrid IC Jumper Test Point 47μF/50V 10μF/50V 1.0 kΩ 1.0 kΩ - ±20％ ±20％ ±5％ ±5％ ±1％ - Radial Radial Through hole Through hole Through hole - SUN SUN AKAHANE ELECTRONICS AKAHANE ELECTRONICS AKAHANE ELECTRONICS ON Semiconductor Mac-Eight Mac-Eight 50ME47CA 50ME10CA RN14S102JK RN14S102JK RN14S****FK STK681-320 JR-4 ST-1-3 Substitution Allowed Lead Free YES YES YES YES YES NO YES YES YES YES YES YES YES YES YES YES Note: R3 is used for Vref current setting. Therefore their value is not mentioned on this table. 1/6/2014 Page 1 of 1 www.onsemi.com