Blackfin Audio EZ-Extender Manual (Rev. 1.0)

Blackfin Audio EZ-Extender
Manual
Revision 1.0, October 2005
Part Number
82-000195-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106
a
Copyright Information
© 2005 Analog Devices, Inc., ALL RIGHTS RESERVED. This document may not be reproduced in any form without prior, express written
consent from Analog Devices, Inc.
Printed in the USA.
Limited Warranty
The Blackfin Audio EZ-Extender is warranted against defects in materials
and workmanship for a period of one year from the date of purchase from
Analog Devices or from an authorized dealer.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without
prior notice. Information furnished by Analog Devices is believed to be
accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use; nor for any infringement of patents or other rights of
third parties which may result from its use. No license is granted by implication or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, VisualDSP++, and EZ-KIT Lite are
registered trademarks of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
The Blackfin Audio EZ-Extender has been certified to comply with the
essential requirements of the European EMC directive 89/336/EEC
(inclusive 93/68/EEC) and, therefore, carries the “CE” mark.
The Blackfin Audio EZ-Extender had been appended to Analog Devices
Development Tools Technical Construction File referenced
“DSPTOOLS1” dated December 21, 1997 and was awarded CE Certification by an appointed European Competent Body and is on file.
The EZ-KIT Lite evaluation system contains ESD
(electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without
detection. Permanent damage may occur on devices
subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance
degradation or loss of functionality. Store unused
EZ-KIT Lite boards in the protective shipping
package.
CONTENTS
PREFACE
Product Overview .......................................................................... vii
Purpose of This Manual ................................................................ viii
Intended Audience .......................................................................... ix
Manual Contents ............................................................................ ix
What’s New in This Manual ............................................................. x
Technical or Customer Support ........................................................ x
Supported Products ......................................................................... xi
Product Information ....................................................................... xi
Related Documents ................................................................... xi
Notation Conventions ................................................................... xiii
AUDIO EZ-EXTENDER INTERFACES
Audio EZ-Extender Setup ............................................................. 1-1
Analog Audio Interface .................................................................. 1-2
Digital Audio Interface .................................................................. 1-4
AUDIO EZ-EXTENDER HARDWARE REFERENCE
System Architecture ...................................................................... 2-2
Configuration Jumpers and Switches ............................................. 2-4
Blackfin Audio EZ-Extender Manual
v
CONTENTS
ADSP-BF537 EZ-KIT Lite Select Jumper (JP1.1/2) ................. 2-5
EZ-KIT Lite SPORT0 Enable Jumper (JP1.3/4) ...................... 2-6
EZ-KIT Lite SPORT1 Enable Jumper (JP1.5/6) ...................... 2-6
SPORT Select Jumper (JP1.7/8) .............................................. 2-6
AD1938 MCLK Source Jumper (JP2) ...................................... 2-6
SPDIF Loopback Jumper (JP4) ............................................... 2-7
Analog Input Gain Switches (SW1–4) ..................................... 2-7
BILL OF MATERIALS
SCHEMATICS
INDEX
vi
Blackfin Audio EZ-Extender Manual
PREFACE
Thank you for purchasing the Blackfin® Audio EZ-Extender, Analog
Devices, Inc. (ADI) daughter board to the EZ-KIT Lite® evaluation system for the ADSP-BF533, ADSP-BF537, and ADSP-BF561 Blackfin
processors.
The Blackfin processors are embedded processors that support a Media
Instruction Set Computing (MISC) architecture. This architecture is the
natural merging of RISC, media functions, and digital signal processing
characteristics towards delivering signal processing performance in a
microprocessor-like environment.
The EZ-KIT Lite and Audio EZ-Extender are designed to be used in conjunction with the VisualDSP++® development environment.
VisualDSP++ offers a powerful programming tool with new flexibility that
significantly decreases the time required to port software code to a processor, reducing time-to-market.
To learn more about Analog Devices development software, go to
http://www.analog.com/processors/tools/.
Product Overview
The Blackfin Audio EZ-Extender is a separately sold daughter board that
plugs onto the expansion interface of the ADSP-BF533, ADSP-BF537, or
ADSP-BF561 EZ-KIT Lite evaluation system. The daughter board aids
the design and prototyping phases of ADSP-BF533, ADSP-BF537, and
ADSP-BF561 processor targeted applications.
Blackfin Audio EZ-Extender Manual
vii
Purpose of This Manual
The board extends the capabilities of the evaluation system by providing a
connection to thee audio codecs, including two analog audio codecs and
one dual analog/digital audio codec with an interface to digital Sony Philips Digital Interface (SPDIF) audio.
The following is a list of the Blackfin Audio EZ-Extender interfaces.
• Analog audio interface
D
D
D
AD1938 – Analog Devices 192 kHz audio codecs
Four stereo analog audio inputs via RCA jacks
Eight stereo analog audio outputs via RCA jacks
• Digital audio interface
D
One ADAV801 – Analog Devices SPDIF transceiver with
sample rate converter
One SPDIF input via a RCA jack
D
One SPDIF output via a RCA jack
D
• Expansion interface on both sides of the board for stacking other
EZ-Extender boards
Before using any of the interfaces, follow the setup procedure in “Audio
EZ-Extender Setup” on page 1-1.
Example programs are available to demonstrate the capabilities of the
Blackfin Audio EZ-Extender board.
Purpose of This Manual
The Blackfin Audio EZ-Extender Manual describes the operation and configuration of the components on the extension board. A schematic and a
bill of materials are provided as a reference for future Blackfin processor
board designs.
viii
Blackfin Audio EZ-Extender Manual
Preface
Intended Audience
This manual is a user’s guide and reference to the Blackfin Audio
EZ-Extender. Programmers who are familiar with the Analog Devices
Blackfin processor architecture, operation, and development tools are the
primary audience for this manual.
Programmers who are unfamiliar with VisualDSP++ or EZ-KIT Lite evaluation software should refer to the ADSP-BF533, ADSP-BF537, or
ADSP-BF561 Evaluation System Manual, VisualDSP++ online Help, and
user’s or getting started guides. For the locations of these documents, refer
to “Related Documents”.
Manual Contents
The manual consists of:
• Chapter 1, “Audio EZ-Extender Interfaces” on page 1-1
Provides basic board information.
• Chapter 2, “Audio EZ-Extender Hardware Reference” on page 2-1
Provides information on the hardware aspects of the board.
• Appendix A, “Bill Of Materials” on page A-1
Provides a list of components used to manufacture the
EZ-Extender board.
• Appendix B, “Schematics” on page B-1
Provides the resources to allow EZ-KIT Lite board-level debugging
or to use as a reference design.
appendix is not part of the online Help. The online Help
L This
viewers should go to the PDF version of the Blackfin Audio
EZ-Extender Manual located in the Docs\EZ-KIT
Blackfin Audio EZ-Extender Manual
Lite Manuals
ix
What’s New in This Manual
folder on the installation CD to see the schematics. Alternatively,
the schematics can be found on the Analog Devices Web site,
www.analog.com/processors.
What’s New in This Manual
This is the first edition of the Blackfin Audio EZ-Extender Manual.
Technical or Customer Support
You can reach Analog Devices, Inc. Customer Support in the following
ways:
• Visit the Embedded Processing and DSP products Web site at
http://www.analog.com/processors/technicalSupport
• E-mail tools questions to
[email protected]
• E-mail processor questions to
[email protected] (World wide support)
[email protected] (Europe support)
[email protected] (China support)
• Phone questions to 1-800-ANALOGD
• Contact your Analog Devices, Inc. local sales office or authorized
distributor
• Send questions by mail to:
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
x
Blackfin Audio EZ-Extender Manual
Preface
Supported Products
The Blackfin Audio EZ-Extender is designed as an extension board to the
ADSP-BF533, ADSP-BF537, and ADSP-BF561 EZ-KIT Lite evaluation
systems.
Product Information
You can obtain product information from the Analog Devices Web site,
from the product CD-ROM, or from the printed publications (manuals).
Analog Devices is online at www.analog.com. Our Web site provides information about a broad range of products—analog integrated circuits,
amplifiers, converters, and digital signal processors.
Related Documents
For information on product related development software, see the following publications.
Table 1. Related Processor Publications
Title
Description
•
•
General functional description, pinout, and
timing.
•
ADSP-BF533 Embedded Processor Datasheet
ADSP-BF536/ADSP-BF537 Embedded Processor Datasheet
ASP-BF561 Blackfin Embedded Symmetric
Multi-Processor Datasheet
Blackfin Audio EZ-Extender Manual
xi
Product Information
Table 1. Related Processor Publications (Cont’d)
Title
Description
•
Description of internal processor architecture
and all register functions
•
•
ADSP-BF533 Blackfin Processor Hardware
Reference
ADSP-BF537 Blackfin Processor Hardware
Reference
ASP-BF561 Blackfin Processor Hardware
Reference
Blackfin Processor Instruction Set Reference
Description of all allowed processor assembly
instructions.
Table 2. Related VisualDSP++ Publications
Title
Description
•
Description of the EZ-KIT Lite features and
usage.
Note: For the ADSP-BF537 EZ-KIT Lite,
there is additional Getting Started with
ADSP-BF537 EZ-KIT Lite.
•
•
xii
ADSP-BF533 EZ-KIT Lite Evaluation System Manual
ADSP-BF537 EZ-KIT Lite Evaluation System Manual
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
VisualDSP++ User’s Guide
Description of VisualDSP++ features and usage
VisualDSP++ Assembler and Preprocessor Manual
Description of the assembler function and
commands
VisualDSP++ C/C++ Complier and Library
Manual for Blackfin Processors
Description of the complier function and commands for Blackfin processors
VisualDSP++ Linker and Utilities Manual
Description of the linker function and commands
VisualDSP++ Loader Manual
Description of the loader function and commands
Blackfin Audio EZ-Extender Manual
Preface
All documentation is available online. Most documentation is available in
printed form.
Visit the Technical Library Web site to access all processor and tools manuals and data sheets:
http://www.analog.com/processors/resources/technicalLibrary.
Notation Conventions
Text conventions used in this manual are identified and described as
follows.
Example
Description
{this | that}
Alternative required items in syntax descriptions appear within curly
brackets and separated by vertical bars; read the example as this or
that. One or the other is required.
[this | that]
Optional items in syntax descriptions appear within brackets and separated by vertical bars; read the example as an optional this or that.
[this,…]
Optional item lists in syntax descriptions appear within brackets
delimited by commas and terminated with an ellipse; read the example
as an optional comma-separated list of this.
.SECTION
Commands, directives, keywords, and feature names are in text with
letter gothic font.
filename
Non-keyword placeholders appear in text with italic style format.
Blackfin Audio EZ-Extender Manual
xiii
Notation Conventions
Example
L
a
[
Description
Note: For correct operation, ...
A Note provides supplementary information on a related topic. In the
online version of this book, the word Note appears instead of this
symbol.
Caution: Incorrect device operation may result if ...
Caution: Device damage may result if ...
A Caution identifies conditions or inappropriate usage of the product
that could lead to undesirable results or product damage. In the online
version of this book, the word Caution appears instead of this symbol.
Warning: Injury to device users may result if ...
A Warning identifies conditions or inappropriate usage of the product
that could lead to conditions that are potentially hazardous for the
devices users. In the online version of this book, the word Warning
appears instead of this symbol.
conventions, which apply only to specific chapters, may
L Additional
appear throughout this document.
xiv
Blackfin Audio EZ-Extender Manual
1 AUDIO EZ-EXTENDER
INTERFACES
This chapter provides the setup procedure and describes two types of
interfaces the extender supports.
The information is presented in the following order.
• “Audio EZ-Extender Setup” on page 1-1
• “Analog Audio Interface” on page 1-2
• “Digital Audio Interface” on page 1-4
Audio EZ-Extender Setup
It is very important to set up all of the components of the system containing the Audio EZ-Extender before applying power to that system. The
following procedure is recommended for the correct setup.
Power your system when these steps are completed:
1. Read the applicable design interface section in this chapter—the
text provides an overview of the capabilities of the interface.
2. Read “System Architecture” on page 2-2 to understand the physical
connections of the daughter board. For detailed information, refer
to “Schematics on page B-1”.
3. Refer to the readme.txt file in the
subdirectory
of the VisualDSP++ installation directory for information on how
\…\Blackfin\EZ-KITs\Audio EZ-EXTENDER\Examples
Blackfin Audio EZ-Extender Manual
1-1
Analog Audio Interface
to configure jumpers and switches on both the Audio EZ-Extender
and EZ-KIT Lite boards. For custom setups use “System Architecture” on page 2-2 in conjunction with “Configuration Jumpers and
Switches” on page 2-4.
Analog Audio Interface
For analog audio applications, the Audio EZ-Extender uses two AD1938
multichannel 192 kHz audio codecs. The AD1938 is a high-performance,
single-chip codec chip that provides four analog-to-digital converters
(ADCs) with differential inputs and eight digital-to-analog converters
(DACs) with single-ended outputs. The DAC outputs operate using
ADI’s patented multibit sigma-delta architecture. The chip provides auxiliary input and output SPORTs for connecting to other codecs, increasing
the number of channels a single SPORT uses. A serial peripheral interface
(SPI) port is included, allowing the microcontroller to adjust volume and
many other audio parameters.
For a picture of the audio interface connections, see Figure 2-1 on
page 2-3. For more detailed information, see “Schematics on page B-1”.
The two AD1938 chips (referred to as AD1938_A and AD1938_B in the
block diagrams) connect in parallel to a single SPORT. The chips connect
for a time-division multiplexed (TDM) output mode:
• At a 48 kHz sample rate, TDM mode allows up to 16 channels of
data to be sent from each chip in each direction. Each chip uses
four of the 16 input channels and eight of the 16 output channels.
1-2
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Interfaces
The number of channels can be set up in the control registers and
is dependant on the sample rate. As the sample rate increases, the
number of possible channels decreases.
• At 96 kHz, the AD1938 operates with a maximum of eight channels in each direction. At 96 kHz, all of the TDM channels are
used by all analog outputs, but there are still four extra input channels, two of which can be used by the digital inputs.
• At the 192 kHz sample rate, a maximum of four channels in each
direction can be used, meaning that four of the output channels
cannot be used.
The auxiliary SPORTs of the AD1938_A codec connect to the
ADAV801’s auxiliary SPORT (see “System Architecture” on page 2-2 for
more information). The Sony Philips Digital Interface (SPDIF) stream
requires two channels of the TDM stream for each direction: two channels
for left and right input audio, and two channels for left and right output
audio.
If the AD1938 runs at the 48 kHz sample rate, both the input and output
digital streams can be put into the TDM stream. In this case, all of the
clocks in the system must be set up relative to the recovered clock from the
SPDIF input.
At the 96 kHz sample rate, only the SPDIF inputs is able to be added to
the TDM stream. This is because at 96 kHz, only eight outputs channels
are available and they are all being used by the outputs.
The internal phase-locked loop (PLL) of the AD1938 codec can be configured to generate all of the clocking and frame sync signals. The source
clock of the PLL can be from either the serial port frame sync or an externally supplied clock. The external master clock (MCLK) comes from the
ADAV801 codec. A jumper (JP2) allows the master clock to come directly
from the SYSCLK3 pin of the ADAV801 or from a divided version of the
SYSCLK1, either divided by 2 or 4. The divided clocks are necessary when a
Blackfin Audio EZ-Extender Manual
1-3
Digital Audio Interface
sample rate less than 32 kHz is required. Otherwise, a signal clock frequency at the MCLK pin of the AD1938 can generate the 48 kHz, 96 kHz,
or 192 kHz sample rate.
The analog input pins of the AD1938’s input signals operate in the range
from 0 Vrms to 1 Vrms. To allow larger signals to be input at the RCA
jacks, the input amplifiers (external to the AD1938) are capable of attenuating the signals. See “Configuration Jumpers and Switches” on page 2-4
for more information.
The analog output pins of the AD1938’s output signals operate in the
range from 0 Vrms to 1 Vrms. The output amplifiers are set to a gain of
1.5x, giving the system unity gain when switches SW1–4 are all ON.
Example programs demonstrating the capabilities of the audio interface
are included in the in the
\…\Blackfin\EZ-KITs\Audio EZ-EXTENDER\Examples subdirectory of the
VisualDSP++ installation directory.
For more information about the AD1938 codecs, go to http://www.analog.com and search for AD1938.
Digital Audio Interface
For digital audio applications, the Audio EZ-Extender uses the ADAV801
codec chip. The ADAV801 chip has an analog stereo input, analog stereo
output, digital stereo input, and a digital stereo output. In addition to
these inputs and outputs, the ADAV801 also has an internal sample rate
converter, which can be used to change the sample rate between the different interfaces. On the Audio EZ-Extender, the analog input and outputs
are not used. The digital interface can operate at up to a 200 kHz sample
rate. The ADAV801 operates in the I2S mode, which allows only two
channels (left and right) of input and two channels of output. It also has
an auxiliary serial port for connecting to other devices. The configuration
registers are configured using an SPI port connected to the processor.
1-4
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Interfaces
The ADAV801 has two internal PLLs, which can produce all of the necessary internal clocks for the different interfaces of the chip. An external
27 MHz oscillator is used as a clock source for the PLLs. The external
clocks, which also go to the AD1938 codecs, are generated from the PLLs.
The recovered clock from the SPDIF input can be used as a clock input
for the serial ports, as well as for the generated external clock output
SYSCLK3.
The primary serial port of the ADAV801 codec connects to the processor
on the mother board, while the secondary serial port connects to the
AD1938_A codec. For a picture of the digital audio interface connections,
see “System Architecture” on page 2-3. For more detailed information, see
“Schematics on page B-1”. The internal routing of the different interfaces
of the ADAV801 is completely configurable. The SPDIF input and output can be separately routed to either or both the primary and secondary
serial ports.
Example programs demonstrating the capabilities of the digital audio
interface are included in the in the
\…\Blackfin\EZ-KITs\Audio EZ-EXTENDER\Examples subdirectory of the
VisualDSP++ installation directory.
For more information about the ADAV801 codecs, go to
http://www.analog.com and search for ADAV801.
Blackfin Audio EZ-Extender Manual
1-5
Digital Audio Interface
1-6
Blackfin Audio EZ-Extender Manual
2 AUDIO EZ-EXTENDER
HARDWARE REFERENCE
This chapter describes the hardware design of the Blackfin Audio
EZ-Extender.
The following topics are covered.
• “System Architecture” on page 2-2
Describes the configuration of the daughter board and explains
how the board components interface with the processor and
EZ-KIT Lite.
• “Configuration Jumpers and Switches” on page 2-4
Describes the function of the configuration jumpers and switches.
Blackfin Audio EZ-Extender Manual
2-1
System Architecture
System Architecture
A picture of the board layout, connector and jumper locations is shown in
Figure 2-2 on page 2-5. A block diagram of the Audio EZ-Extender is
shown in Figure 2-1.
The analog audio interface consists of two AD1938 audio codecs (referred
to as AD1938_A and AD1938_B codecs), which use one of the processor’s serial ports (SPORTs). All of the clock and frame sync signals must
be driven by one of the AD1938 chips. The analog audio interface is configured for the time-division multiplexed (TDM) serial mode. In the
TDM mode, a single clock and frame sync are used to transmit and
receive the data. The data signals of the AD1938_A codec connect to the
processor’s primary SPORT TX and RX pins, and the data signals of the
AD1938_B codec connect to the secondary SPORT TX and RX pins (see
“Analog Audio Interface” on page 1-2).
The digital audio interface consists of the ADAV801 codec. The codec
chip communicates in the I2S mode. In the I2S mode, the transmit and
receive clock, along with the frame sync signals, are set individually to
transmit sample rate that is different from the receive sample rate.
The ADAV801 codec has a secondary transmit and receive SPORT,
which is interfaced with the auxiliary SPORT of the AD1938_A codec.
The interface operates in the I2S mode and is mastered by the ADAV801
chip. The interface allows the digital audio data steams to be multiplexed
into the analog audio data stream, facilitating access to all of the data signals via a single SPORT. This is dependent on the sample rate, as
described in “Analog Audio Interface” on page 1-2.
A jumper setting allows the routing of the processor’s SPORTs to be
swapped with the SPORTs of the analog and digital interfaces. If the
SPORT on the mother board is already in use, this feature allows either of
2-2
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Hardware Reference
Figure 2-1. System Architecture
Blackfin Audio EZ-Extender Manual
2-3
Configuration Jumpers and Switches
the audio interfaces to be used instead. In addition, each SPORT individually can be disabled and not driven by the Audio EZ-Extender on the
mother board. For more information, see the following sections:
• “SPORT Select Jumper (JP1.7/8)” on page 2-6
• “EZ-KIT Lite SPORT1 Enable Jumper (JP1.5/6)” on page 2-6
• “EZ-KIT Lite SPORT0 Enable Jumper (JP1.3/4)” on page 2-6.
Each of the Audio EZ-Extender’s ICs (AD1938_A, AD1938_B, and
ADAV801) is configured using the SPI interface of the processor. Each
chip includes its own chip select pin. On the ADSP-BF537 EZ-KIT Lite,
the location of the chip select signals on the expansion interface is different from that location on the ADSP-BF533 and ADSP-BF561 EZ-KIT
Lites. A jumper is used to define for which EZ-KIT Lite to set up the SPI
select signals. For more information, see “ADSP-BF537 EZ-KIT Lite
Select Jumper (JP1.1/2)” on page 2-5.
All of the expansion interface signals are passed directly through the board
from the EZ-KIT Lite to another set of expansion interface connectors.
This allows other EZ-Extender boards to be attached to the Audio
EZ-Extender.
Configuration Jumpers and Switches
Before using the Blackfin Audio EZ-Extender, follow the steps in “Audio
EZ-Extender Setup” on page 1-1.
Figure 2-2 shows the locations of all of the jumper headers. The jumper
headers are divided to show the placement and rotation of each jumper.
The jumpers are described by the pins of the header on which the jumpers
can be placed. For example, JP1.1/2 refers to a single jumper that can be
placed across pins 1 and 2 of JP1. The dark pin indicates pin 1 of each
header.
2-4
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Hardware Reference
Figure 2-2. Jumper Locations
ADSP-BF537 EZ-KIT Lite Select Jumper (JP1.1/2)
When interfacing the Audio EZ-Extender with the ADSP-BF537 EZ-KIT
Lite, insert the JP1.1/2 jumper to route the ADSP-BF537 EZ-KIT Lite
SPI select signals to the corresponding codec.
Blackfin Audio EZ-Extender Manual
2-5
Configuration Jumpers and Switches
EZ-KIT Lite SPORT0 Enable Jumper (JP1.3/4)
Installing a jumper at this location enables the SPORT0 signals of the
EZ-KIT Lite to drive and be driven by the Audio EZ-Extender. Do not
install this jumper if SPORT0 is used elsewhere on the mother board.
EZ-KIT Lite SPORT1 Enable Jumper (JP1.5/6)
Installing a jumper at this location enables the SPORT1 signals of the
EZ-KIT Lite to drive and be driven by the Audio EZ-Extender. Do not
install this jumper if SPORT0 is used elsewhere on the mother board.
SPORT Select Jumper (JP1.7/8)
The JP1.7/8 jumper determines how SPORT0 and SPORT1 are routed to the
analog SPORT (SPORT_A) and the digital SPORT interface (SPORT_B). See
Figure 2-1 on page 2-3 for more details. The following table describes the
jumper connections.
SPORT_SEL (JP1.7/8) Setting
Connection
Not installed
SPORT0
SPORT1
= SPORT_B (digital)
= SPORT_A (analog)
Installed
SPORT0
SPORT1
= SPORT_A (analog)
= SPORT_B (digital)
AD1938 MCLK Source Jumper (JP2)
The JP2 jumper determines the source of the master clock (MCLK) of the
AD1938 audio codecs. The standard configuration connects the SYSCLK3
pin of the ADAV801 codec to MCLK by installing the JP2.5/6 jumper.
Two other jumper positions, JP2.1/2 and JP2.3/4, connect MCLK to the
ADAV801 codec’s SYSCLK1 pin divided by 4 and 2, respectively. These
positions can be used to supply the AD1938 codec with lower master
clock frequencies to reach the lower sample rates. For more information
2-6
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Hardware Reference
about the SYSCLK1 and SYSCLK3 pins, refer to the ADAV801 datasheet.
For more information on the MCLK frequencies and sample rates, see the
AD1938 datasheet.
SPDIF Loopback Jumper (JP4)
The JP4 jumpers are used for test purposes only; the SPDIF jumpers
loop-back the digital output signals to the digital input.
Analog Input Gain Switches (SW1–4)
The SW1–4 switches allow the gain of each analog input to be changed
from 1/(1.5) to 1/(2.12). This is useful when the input signals are too
large for the AD1938 codec to handle. The following table shows which
switch position corresponds to each analog input channel.
Switch Position
Analog Input Channel
SW1.1
AIN1_L
SW1.2
AIN1_R
SW2.1
AIN2_L
SW2.2
AIN2_R
SW3.1
AIN3_L
SW3.2
AIN3_R
SW4.1
AIN4_L
SW4.2
AIN4_R
When the switch is ON, the gain is set to 1/(1.5). When the switch is OFF,
the gain is set to 1/(2.12).
Blackfin Audio EZ-Extender Manual
2-7
Configuration Jumpers and Switches
2-8
Blackfin Audio EZ-Extender Manual
A BILL OF MATERIALS
The bill of materials corresponds to the board schematics on page B-1.
Please check the latest schematics on the Analog Devices website,
http://www.analog.com/Processors/Processors/DevelopmentTools/tec
hnicalLibrary/manuals/DevToolsIndex.html#Evaluation%20Kit%20Manuals.
Blackfin Audio EZ-Extender Manual
A-1
A-2
Blackfin Audio EZ-Extender Manual
16
40
15
9
10
2
5
8
2
4
2
48
3
7
1
2
16
16
1
6
#
Ref.
10UF 6.3V 10% 805
4.7UF 6.3V 20% 0603
0.001UF 50V 5% 0603
22pF 50V 5% 805
270PF 50V 5% 0603
390PF 25V 5% 0603
5.6NF 16V 5% 0805
0.1UF 16V 10% 0603
0.01UF 16V 10% 0603
2200PF 50V 5% 0603
Description
C22,C34-35,C52,C61,C85,C87,
C158,C161,C167,C172,C174-175,
C182,C185
C20-21,C28-29,C38-39,C50-51,
C59-60,C68-69,C77-78,C88-89,
C117-124,C137,C144,C155,C159,
C173,C180,C196,C201,C212-219
C18-19,C32-33,C36-37,C53-54,
C56-57,C70-71,C74-75,C90-91
C152-153
C1-4,C14-17,C92-95,C104-107
C136,C192
C132,C187
C126,C31,C55,C58,C76,C86,
C125,C127-130,C135,C138,C140143,C146-147,C149-150,C154,
C157,C162-165,C169-171,
C176-177,C179,C183-184,C189191,C194-195,C197,C199-200,
C203,C205-206,C209-210
C116
C108-115,C220-227
Reference Designator
AVX
PANASONIC
PANASONIC
AVX
YAGEO
AVX
AVX
AVX
KEMET
PANASONIC
Manufacturer
080560106KAT2A
ECJ-1VB0J475M
ECJ-1VC1H102J
08055A220JAT
06032R271K9B20D
06033A391FAT2A
0805YA562JAT2A
0603YC104KAT2A
C0603C103K4RAC
ECJ-1VB1H222K
Part Number
#
8
16
2
2
16
1
1
4
1
16
3
3
2
2
2
1
Ref.
11
12
13
14
15
16
17
18
Blackfin Audio EZ-Extender Manual
19
20
21
22
23
24
25
26
IDC 2X1 IDC2X1
IDC 4X2 IDC4X2
0.05 10X2 CON040
RCA 1X1 CON012
RCA 4X2 CON011
0.05 45X2 CON019
600 100MHZ 200MA 0603
47UF 6.3V 10% B
10UF 10V +80/-20% 0805
82NF 50V 5% 805
2.2uF 10V 10% 805
220PF 50V 5% 0603
33000PF 25V 10% 0603
1.8NF 50V 5% 0805
100PF 50V 5% 0603
120PF 50V 5% 0603
Description
JP4
JP1-2
J9-10
J5-6
J4,J7-8
J1-3
FER1-16
CT1
C9,C134,C186,C207
C73
C72
C5-8,C10-13,C96-103
C44-45
C40,C49
C25,C30,C43,C48,C64,C67,C79,
C84,C133,C148,C151,C166,C168,
C188,C193,C204
C23,C26,C41,C46,C62,C65,C80,
C82
Reference Designator
BERG
BURG
SAMTEC
SWITCHCRAFT
SWITCHCRAFT
SAMTEC
MURATA
NIC COMPONENTS
PANASONIC
AVX
AVX
PANASONIC
AVX
NIC COMPONENTS
PANASONIC
AVX
Manufacturer
54101-T08-02
54102-T08-04
SFC-110-T2-F-D-A
PJRAN1X1U01
PJRAS4X2U01
SFC-145-T2-F-D-A
BLM11A601SPT
NTC-T476K6.3TRB
ECJ-2FF1A106Z
08055C823JAT2A
0805ZD225KAT2A
ECJ-1VC1H221J
06033C333KAT2A
NMC0805NPO182J50T
RP
ECJ-1VC1H101J
06035A121JAT2A
Part Number
Bill Of Materials
A-3
A-4
Blackfin Audio EZ-Extender Manual
#
1
3
1
1
16
6
1
8
2
8
8
16
16
9
16
12
Ref.
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
22 1/10W 5% 0603
237 1/10W 1% 0603
0 1/10W 5% 0603
604 1/10W 1% 0603
3.32K 1/10W 1% 0603
28.0K 1/10W 1% 0603
24.9K 1/10W 1% 0603
562 1/10W 1% 0603
22.6K 1/16W 1% 0603
243 1/10W 1% 0603
10K 1/10W 1% 0603
49.9K 1/10W 1% 0603
107 1/10W 1% 805
75.0 1/10W 1% 0603
0.05 45x2 CON018
GREEN-SMT LED001
Description
R27,R55,R58-60,R65,R128,R130131,R133,R142-143
R25-26,R39-42,R53-54,R56-57,
R70-71,R73-74,R83-84
R203,R31,R36,R45,R51,R63,R68,
R77,R81
R1-8,R101-108
R171-178,R186-193
R155,R157-158,R161-162,
R165-166,R169
R126-127,R129,R132,R134-135,
R138,R140
R125,R136
R124,R156,R159-160,R163-164,
R167-168
R121
R119-120,R122-123,R153-154
R111-118,R144-151
R110
R109
P1-3
LED1
Reference Designator
VISHAY
DIGI-KEY
PHYCOMP
DIGI-KEY
DIGI-KEY
DIGI-KEY
DIGI-KEY
DALE
DALE
DALE
DIGI-KEY
DIGI-KEY
YAGEO
DIGI-KEY
SAMTEC
PANASONIC
Manufacturer
CRCW0603220JRT1
311-237HTR-ND
9C06031A0R00JLHFT
311-604HTR-ND
311-3.32KHTR-ND
311-28.0KHTR-ND
311-24.9KHTR-ND
CRCW06035620FRT1
CRCW06032262FRT1
CRCW06032430FRT1
311-10.0KHTR-ND
311-49.9KHTR-ND
9C08052A1070FKHFT
9T06031A75R0FBHFT
TFC-145-32-F-D
LN1361C
Part Number
#
16
3
1
48
4
5
1
1
6
8
2
1
1
Ref.
43
44
45
46
47
48
49
50
Blackfin Audio EZ-Extender Manual
51
52
53
54
55
27MHZ SMT OSC011
74LVC74A TSSOP14
AD1938 LQFP48
AD8608ARU TSSOP14
74LVC157 TSSOP16
ADAV801A LQFP64
SN74LVC1G08 SOT23-5
IDC 1X1 IDC1X1
DIP2 SWT020
4.99K 1/16W 1% 0603
750 1/10W 5% 805
732 1/10W 1% 0603
5.76K 1/10W 1% 0603
Description
Y1
U9
U7,U18
U4-5,U8,U12,U15,U19,U21-22
U3, U6, U10, U13, U11, U16
U14
U1
TP1-2,TP6,TP8-9
SW1-4
R9-24,R85-100,R170,R179-185,
R194-201
R72
R47-48, R152
R29-30,R34-35,R43-44,R49-50,
R61-62,R66-67,R75-76,R79-80
Reference Designator
DIGIKEY
PHILIPS
ANALOG
DEVICES
ANALOG
DEVICES
DIGI-KEY
ANALOG
DEVICES
TI
DIGI-KEY
DIGI-KEY
DIGI-KEY
PHILIPS
NIC COMPONENTS
DIGI-KEY
Manufacturer
300-6150-1-ND
74LVC74APW
AD1938XSTZ
AD8608ARU
296-1225-1-ND
ADAV801ASTZ
SN74LVC1G08DBVR
S1012-01-ND
CKN1362-ND
RHM4.99KHTR-ND
9C08052A7500JLRJ/R
NRC06F7320TR
311-5.76KHTR-ND
Part Number
Bill Of Materials
A-5
A-6
Blackfin Audio EZ-Extender Manual
A
B
C
D
REVISIONS
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
1
1
2
2
Blackfin Audio EZ-Extender
Schematic
3
3
8
SPDIF_IN
7
6
5
SPDIF_OUT
ANALOG_OUT
J1
4
ANALOG_IN
J2
3
2
DNP = Do Not Populate
See Manual for Jumper Settings
1
ANALOG
DEVICES
J3
4
ANALOG_OUT
RIGHT = RED
LEFT = WHITE
1
2
3
Approvals
4
Drawn
MJE
Checked
Engineering
A
B
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
TITLE
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
8-26-2005_14:09
D
1
of
12
A
B
C
D
REVISIONS
3.3V
EXPANSION INTERFACE (TYPE B)
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
3.3V
5V
R137
10K
0603
DNP
3.3V
Expansion Connector 1
Bottom Of Board
Top Of Board
R141
10K
0603
DNP
Expansion Connector 2
Bottom Of Board
Top Of Board
1
1
P1_[5:86]
2
3
P1
1
2
2
1
3
4
4
3
P1_5
5
6
P1_6
6
5
P1_5
P1_7
7
8
P1_8
P1_8
8
7
P1_7
P1_9
9
10
P1_10
P1_10
10
9
P1_9
P1_11
11
12
P1_12
P1_12
12
11
P1_11
P1_13
13
14
P1_14
P1_14
14
13
P1_13
P1_15
15
16
P1_16
P1_16
16
15
P1_15
P1_17
17
18
P1_18
P1_18
18
17
P1_19
19
20
P1_20
P1_20
20
19
P1_21
21
22
P1_22
P1_22
22
P1_23
23
24
P1_24
P1_24
24
P1_25
25
26
P1_26
P1_26
P1_27
27
28
P1_28
P1_29
29
30
P1_30
P1_31
31
32
P1_33
33
P1_35
P2_[5:86]
J1
1
2
J2
2
1
3
4
4
3
P2_5
5
6
P2_6
P2_6
6
5
P2_5
P2_7
7
8
P2_8
P2_8
P2_7
9
10
11
12
13
14
P2_15
15
16
P2_16
P1_17
P2_17
17
18
P1_19
P2_19
19
20
21
P1_21
P2_21
21
23
P1_23
P2_23
23
26
25
P1_25
P2_25
P1_28
28
27
P1_27
P1_30
30
29
P1_29
P1_32
P1_32
32
31
P1_31
34
P1_34
P1_34
34
33
P1_33
35
36
P1_36
P1_36
36
35
P1_35
37
38
38
37
P1_39
39
40
P1_40
P1_40
40
39
P1_39
P1_41
41
42
P1_42
P1_42
42
41
P1_41
P1_43
43
44
P1_44
P1_44
44
43
P1_43
P2_43
P1_45
45
46
P1_46
P1_46
46
45
P1_45
P1_47
47
48
P1_48
P1_48
48
47
P1_49
49
50
P1_50
P1_50
50
49
P1_51
51
52
P1_52
P1_52
52
P1_53
53
54
P1_54
P1_54
54
P1_55
55
56
P1_56
P1_56
P1_57
57
58
P1_58
P1_59
59
60
P1_61
61
P1_63
63
P1_65
P1_6
P2
R139
10K
0603
DNP
8
7
10
9
12
11
14
13
P2_16
16
15
P2_15
P2_18
P2_18
18
17
P2_17
P2_20
P2_20
20
19
P2_19
22
P2_22
P2_22
22
21
P2_21
24
P2_24
P2_24
24
23
P2_23
25
26
P2_26
P2_26
26
25
P2_25
27
28
28
27
29
30
30
29
31
32
32
31
33
34
34
33
35
36
36
35
37
38
38
37
39
40
40
39
41
42
42
41
43
44
P2_44
P2_44
44
43
P2_43
P2_45
45
46
P2_46
P2_46
46
45
P2_45
P1_47
P2_47
47
48
P2_48
P2_48
48
47
P2_47
P1_49
P2_49
49
50
P2_50
P2_50
50
49
P2_49
51
P1_51
P2_51
51
52
P2_52
P2_52
52
51
P2_51
53
P1_53
P2_53
53
54
P2_54
P2_54
54
53
P2_53
56
55
P1_55
55
56
56
55
ADAV801_SPISEL_BF533_BF561_PF3
P1_58
58
57
P1_57
57
58
58
57
AD1938_B_SPISEL_BF533_BF561_PF1
P1_60
P1_60
60
59
P1_59
P2_59
59
60
P2_60
P2_60
60
59
P2_59
62
P1_62
P1_62
62
61
P1_61
P2_61
61
62
P2_62
P2_62
62
61
P2_61
64
P1_64
P1_64
64
63
P1_63
P2_63
63
64
P2_64
P2_64
64
63
P2_63
65
66
P1_66
P1_66
66
65
P1_65
P2_65
65
66
P2_66
P2_66
66
65
P2_65
P1_67
67
68
P1_68
P1_68
68
67
P1_67
P2_67
67
68
P2_68
P2_68
68
67
P2_67
P1_69
69
70
P1_70
P1_70
70
69
P1_69
P2_69
69
70
P2_70
P2_70
70
69
P2_69
P1_71
71
72
P1_72
P1_72
72
71
P1_71
P2_71
71
72
P2_72
P2_72
72
71
P2_71
P1_73
73
74
P1_74
P1_74
74
73
P1_73
P2_73
73
74
P2_74
P2_74
74
73
P2_73
P1_75
75
76
P1_76
P1_76
76
75
P1_75
75
76
76
75
P1_77
77
78
P1_78
P1_78
78
77
P1_77
P2_77
77
78
P2_78
P2_78
78
77
P2_77
P1_79
79
80
P1_80
P1_80
80
79
P1_79
P2_79
79
80
P2_80
P2_80
80
79
P2_79
P1_81
81
82
P1_82
P1_82
82
81
P1_81
P2_81
81
82
P2_82
P2_82
82
81
P2_81
83
84
P1_84
P1_84
84
83
P2_83
83
84
P2_84
P2_84
84
83
P2_83
85
86
P1_86
P1_86
86
85
P2_85
85
86
P2_86
P2_86
86
85
P2_85
87
88
88
87
87
88
88
87
89
90
90
89
89
90
90
89
AD1938_A_SPISEL_BF537_PF5
P1_85
45X2
CON018
SCK
P2_11
DR1SEC
DR1PRI
RFS1
RSCLK1
DR0SEC
DR0PRI
RFS0
RSCLK0
ADAV801_SPISEL_BF533_BF561_PF3
AD1938_B_SPISEL_BF533_BF561_PF1
AD1938_A_SPISEL_BF537_PF5
P1_85
45X2
CON019
MOSI
MOSI
MISO
MISO
DT1SEC
DT1SEC
DT1PRI
DT1PRI
TFS1
TFS1
TSCLK1
TSCLK1
DT0SEC
DT0SEC
DT0PRI
DT0PRI
TFS0
TFS0
TSCLK0
TSCLK0
AD1938_B_SPISEL_BF537_PF4
AD1938_A_SPISEL_BF533_BF561_PF0
45X2
CON018
5V
SCK
P2_11
DR1SEC
DR1PRI
RFS1
RSCLK1
DR0SEC
DR0PRI
2
RFS0
RSCLK0
3
45X2
CON019
3.3V
DNP = Do Not Populate
See Manual for Jumper Settings
4
C207
10UF
0805
C206
0.1UF
603
C22
10UF
805
ANALOG
DEVICES
C205
0.1UF
603
Approvals
Drawn
MJE
Checked
Engineering
A
B
C
Date
Title
03/17/05
Size
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
EXPANSION INTERFACE (1 + 2)
Board No.
C
Date
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
8-25-2005_14:24
D
2
of
12
A
B
C
D
REVISIONS
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
EXPANSION INTERFACE (TYPE B)
5V
3.3V
Expansion Connector 3
1
Bottom Of Board
1
Top Of Board
P3_[1:90]
P3_1
2
P3
1
2
P3_2
P3_2
P3_6
J3
2
1
4
3
6
5
P3_5
P3_1
3
4
P3_5
5
6
P3_6
P3_7
7
8
P3_8
P3_8
8
7
P3_7
P3_9
9
10
P3_10
P3_10
10
9
P3_9
P3_11
11
12
P3_12
P3_12
12
11
P3_11
P3_13
13
14
P3_14
P3_14
14
13
P3_13
P3_15
15
16
P3_16
P3_16
16
15
P3_15
P3_17
17
18
18
17
P3_17
P3_19
19
20
P3_20
P3_20
20
19
P3_19
P3_21
21
22
P3_22
P3_22
22
21
P3_23
23
24
24
23
25
26
26
25
27
28
28
27
P3_29
29
30
30
29
P3_31
31
32
P3_32
P3_32
32
P3_33
33
34
P3_34
P3_34
P3_35
35
36
P3_36
P3_37
37
38
P3_39
39
40
P3_41
41
42
ADAV801_SPISEL_BF537_PF10
For Test Purposes Only
J9
2
1
4
3
P3_21
6
5
P3_23
8
7
10
9
12
11
P3_29
14
13
31
P3_31
16
15
34
33
P3_33
18
17
P3_36
36
35
P3_35
20
19
P3_38
P3_38
38
37
P3_37
P3_40
P3_40
40
39
P3_39
P3_42
P3_42
42
41
P3_41
RESET
AIN1_L_CON
AIN1_R_CON
AIN2_L_CON
AIN2_R_CON
43
44
44
43
P3_45
45
46
P3_46
P3_46
46
45
P3_45
P3_47
47
48
P3_48
P3_48
48
47
P3_47
P3_49
49
50
P3_50
P3_50
50
49
P3_49
P3_51
51
52
P3_52
P3_52
52
51
P3_51
P3_53
53
54
P3_54
P3_54
54
53
P3_55
55
56
P3_56
P3_56
56
P3_57
57
58
P3_58
P3_58
P3_59
59
60
P3_60
P3_61
61
62
P3_63
63
64
65
66
P3_67
67
68
P3_68
P3_69
69
70
P3_70
P3_71
71
72
P3_73
73
P3_75
75
P3_77
AOUT1_L_CON
AOUT1_R_CON
AOUT2_L_CON
AOUT2_R_CON
AOUT3_L_CON
AOUT3_R_CON
AOUT4_L_CON
AOUT4_R_CON
2
10X2
CON040
J10
3
2
1
4
3
P3_53
6
5
55
P3_55
8
7
58
57
P3_57
10
9
P3_60
60
59
P3_59
12
11
P3_62
P3_62
62
61
P3_61
14
13
P3_64
P3_64
64
63
P3_63
16
15
66
65
18
17
P3_68
68
67
P3_67
P3_70
70
69
P3_69
P3_72
P3_72
72
71
P3_71
74
P3_74
P3_74
74
73
P3_73
76
P3_76
P3_76
76
75
P3_75
77
78
P3_78
P3_78
78
77
P3_77
P3_79
79
80
P3_80
P3_80
80
79
P3_79
P3_81
81
82
P3_82
P3_82
82
81
P3_81
P3_83
83
84
P3_84
P3_84
84
83
P3_83
P3_85
85
86
P3_86
P3_86
86
85
P3_85
87
88
88
87
89
90
P3_90
P3_90
90
89
P3_89
45X2
CON018
AIN3_L_CON
AIN3_R_CON
AIN4_L_CON
AIN4_R_CON
20
AOUT5_L_CON
AOUT5_R_CON
AOUT6_L_CON
AOUT6_R_CON
AOUT7_L_CON
AOUT7_R_CON
AOUT8_L_CON
AOUT8_R_CON
19
10X2
CON040
3
5V
P3_89
45X2
CON019
POWER
LED1
GREEN-SMT
LED001
TP9
MH1
MH2
IDC1X1
1X1
3.3V
4
C9
10UF
0805
R152
732
0603
5V
C127
0.1UF
603
C134
10UF
0805
TP2
TP6
IDC1X1
1X1
IDC1X1
1X1
TP8
TP1
IDC1X1
1X1
IDC1X1
1X1
ANALOG
DEVICES
AGND
C130
0.1UF
603
Approvals
Drawn
MJE
Checked
Engineering
A
DNP = Do Not Populate
See Manual for Jumper Settings
B
C
Date
Title
03/17/05
Size
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
EXPANSION INTERFACE (3)
Board No.
C
Date
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
8-25-2005_13:54
D
3
of
12
A
B
C
D
REVISIONS
U11
2
1A
5
2A
11
3A
14
4A
SPORT_A_CLK
SPORT_A_FS
SPORT_A_DIN1
SPORT_A_DIN2
1Y
2Y
3
1B
6
2B
10
3B
13
4B
SPORT_B_RX_CLK
SPORT_B_RX_LRCLK
SPORT_B_RX_DIN1
1
3Y
4Y
4
7
9
12
RSCLK0
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
RFS0
DR0PRI
DR0SEC
1
15
EN
1
~A/B
SPORT0_EN
74LVC157
TSSOP16
U16
2
1A
5
2A
11
3A
14
4A
R202
0
0603
DNP
1Y
2Y
3
1B
6
2B
10
3B
13
4B
3Y
4Y
4
7
9
12
U10
RSCLK1
RFS1
AD1938_A_SPISEL_BF537_PF5
DR1PRI
AD1938_B_SPISEL_BF537_PF4
DR1SEC
ADAV801_SPISEL_BF537_PF10
2
1A
5
2A
11
3A
14
4A
R203
0
0603
2Y
15
EN
1
~A/B
3Y
3
1B
6
2B
10
3B
13
4B
AD1938_A_SPISEL_BF533_BF561_PF0
SPORT1_EN
1Y
AD1938_B_SPISEL_BF533_BF561_PF1
ADAV801_SPISEL_BF533_BF561_PF3
74LVC157
TSSOP16
4Y
4
AD1938_A_SSEL
7
AD1938_B_SSEL
9
ADAV801_SSEL
12
15
2
U3
2
1A
5
2A
11
3A
14
4A
74LVC157
TSSOP16
1Y
2Y
3
1B
6
2B
10
3B
13
4B
SPORT_B_TX_CLK
SPORT_B_TX_LRCLK
2
EN
1
~A/B
BF537_SEL
3Y
4Y
4
7
TSCLK0
TFS0
9
12
15
EN
1
~A/B
74LVC157
TSSOP16
3.3V
U13
2
1A
5
2A
11
3A
14
4A
3
1Y
2Y
3
1B
6
2B
10
3B
13
4B
3Y
4Y
4
7
TSCLK1
TFS1
9
R123
10K
0603
12
R120
10K
0603
BF537_SEL
SPORT0_EN
15
EN
1
~A/B
SPORT_SEL
R122
10K
0603
SPORT1_EN
SPORT_SEL
74LVC157
TSSOP16
R119
10K
0603
JP1
1
2
3
4
5
6
7
8
SPORT_SEL
(JP1.7/8)
Connection
Not Installed
SPORT0 = SPORT_B (Digital)
SPORT1 = SPORT_A (Analog)
Installed
SPORT0 = SPORT_A (Analog)
SPORT1 = SPORT_B (Digital)
3
IDC4X2
4X2
U6
DT0PRI
DT0SEC
2
1A
5
2A
11
3A
14
4A
1Y
2Y
DT1PRI
DT1SEC
4
3
1B
6
2B
10
3B
13
4B
3Y
4Y
4
7
9
SPORT_A_DOUT1
SPORT_A_DOUT2
SPORT_B_TX_DOUT1
DNP = Do Not Populate
See Manual for Jumper Settings
3.3V
12
15
EN
1
~A/B
C126
0.1UF
603
C154
0.1UF
603
C176
0.1UF
603
C142
0.1UF
603
C189
0.1UF
603
ANALOG
DEVICES
C165
0.1UF
603
Approvals
74LVC157
TSSOP16
PI3B3257
Drawn
MJE
Checked
Engineering
A
B
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
CONFIG
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
9-16-2005_17:09
D
4
of
12
A
B
C
D
REVISIONS
3.3V
3.3V
AVDD4
FER15
600
603
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
C76
0.1UF
603
1
C125
0.1UF
603
U1
1
APPR
J6
RCA
CON012
1X1
R121
243
0603
4
SPDIF_OUT
SPDIF_OUT
2
1
2
SN74LVC1G08
SOT23-5
3.3V
AVDD4
R59
22
0603
1
R110
107
805
U2
1
4
2
SN74LVC1G08
SOT23-5
DNP
SPORT_B_TX_CLK
ADVDD
AVDD1
AVDD2
AVDD3
ODVDD
DVDD1
DVDD2
4
53
59
18
24
SPORT_B_TX_DOUT1
15
34
U14
SPORT_B_TX_LRCLK
48
R65
22
0603
26
D_OUT
I_BCLK
R58
22
0603
I_LRCLK
C116
0.01UF
0603
19
SPORT_B_RX_CLK
I_SDATA
23
D_IN
R60
22
0603
SPDIF_IN
SPDIF_IN
O_BCLK
SPORT_B_RX_LRCLK
1
AVDD4
O_LRCLK
R109
75.0
0603
22
SPORT_B_RX_DIN1
O_SDATA
R133
22
0603
51
VOUTL
49
VOUTR
31
IAUX_BCLK
AUX_CLK
R72
750
805
30
IAUX_LRCLK
R55
22
0603
32
IAUX_SDATA
2
VINL
1
VINR
AUX_LRCLK
28
OAUX_BCLK
C72
2.2UF
805
OAUX_LRCLK
29
AUX_DOUT1
OAUX_SDATA
13
ZEROL_INT
14
ZEROR
11
57
VREF
55
FILTD
64
CAPLN
63
CAPLP
60
CAPRN
61
CAPRP
CCLK
10
MOSI
CIN
12
MISO
COUT
9
CLATCH
ADAV801_SSEL
8
RESET
RESET
R130
22
0603
41
50
SYSCLK1
ADAV801_SYSCLK1
NC1
40
C40
1.8NF
0805
C49
1.8NF
0805
C44
33000PF
0603
C45
33000PF
0603
JP4
1
SPDIF_OUT
2
SPDIF_IN
IDC2X1
2X1
C55
0.1UF
603
C52
10UF
805
C58
0.1UF
603
C61
10UF
805
AVDD4
NC2
AGND2
39
SYSCLK3
7
DIR_VDD
6
DIR_GND
38
XIN
3
2
52
SYSCLK2
R131
22
0603
R48
732
0603
5
DIR_LF
45
PLL_LF1
46
PLL_LF2
AUX_DIN1
SCK
R47
732
0603
C73
82NF
805
27
ADAV801_SYSCLK3
2
21
20
2
J5
RCA
CON012
1X1
17
3
37
XOUT
TP5
43
PLL_VDD
44
PLL_GND
35
MCLKI
TP4
ADGND
AGND1
AGND2
AGND3
AGND4
AGND5
DGND3
42
DGND2
33
47
3
54
56
58
ADAV801A
LQFP64
16
C153
22PF
805
62
FER8
600
603
DGND1
MCLKO
C152
22PF
805
ODGND
36
25
Y1
27MHZ
OSC011
AGND2
AGND2
3.3V
4
C171
0.1UF
603
C158
10UF
805
C164
0.1UF
603
AVDD4
C179
0.1UF
603
C186
10UF
0805
C172
10UF
805
C184
0.1UF
603
C161
10UF
805
C163
0.1UF
603
C167
10UF
805
C169
0.1UF
603
C174
10UF
805
C170
0.1UF
603
DNP = Do Not Populate
See Manual for Jumper Settings
C175
10UF
805
C183
0.1UF
603
C182
10UF
805
C162
0.1UF
603
ANALOG
DEVICES
C185
10UF
805
Approvals
Drawn
MJE
Checked
AGND2
A
B
Engineering
C
Date
Title
03/17/05
Size
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ADAV801 - DIGITAL AUDIO
Board No.
C
Date
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-17-2005_10:40
D
5
of
12
A
3.3V
B
C
D
A3V
REVISIONS
3.3V
3.3V
FER1
600
603
4SD
FER13
600
603
R128
22
0603
2
12
D
5
Q
D
10SD
U9
U9
AVDD2
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
R27
22
0603
9
Q
8
6
3
CLK
FER4
600
603
74LVC74A
TSSOP14
74LVC74A
TSSOP14
1
13
RD
AVDD3
1
RD
ADAV801_SYSCLK1
1
QN
11
CLK
QN
RESET
ADAV801_SYSCLK1_DIV4
JP2
1
2
ADAV801_SYSCLK1_DIV2
3
4
5
6
7
8
ADAV801_SYSCLK3
FER11
600
603
AD1938_MCLK
IDC4X2
4X2
FER2
600
603
AGND
3.3V
AVDD2
3.3V
A3V
AVDD3
AUX_LRCLK
AUX_DIN1
AUX_DOUT1
DVDD
A
MISO
AD1938_A_SSEL
17
18
AIN2_RN
15
AIN2_RP
OR1
AOUT2_L
31
OR2
AOUT3_L
7
OR3
AOUT4_L
MCLKO_XO
LF
CM
47
AD1938_A_LF
38
AUX_DOUT2
CCLK
CIN
COUT
CLATCH
10
RESET
C203
0.1UF
603
AGND
C87
10UF
805
C86
0.1UF
603
AIN3_RN
AIN3_RP
AIN4_LN
AVDD3
AIN4_LP
AIN4_RN
AIN4_RP
RESET
AD1938
LQFP48
AOUT5_L
AGND
R125
562
0603
AOUT5_R
AOUT6_L
C136
390PF
0603
AOUT6_R
AOUT7_L
C132
5.6NF
0805
AOUT7_R
AOUT8_L
AOUT8_R
47
LF
38
CM
35
FILTR
AD1938_B_LF
AGND
C150
0.1UF
603
C35
10UF
805
C31
0.1UF
603
AGND
DNP = Do Not Populate
See Manual for Jumper Settings
3.3V
3.3V
4
C190
0.1UF
603
A3V
C194
0.1UF
603
AVDD2
C191
0.1UF
603
C199
0.1UF
603
C200
0.1UF
603
3.3V
C195
0.1UF
603
C143
0.1UF
603
A3V
C138
0.1UF
603
C135
0.1UF
603
AVDD3
C146
0.1UF
603
C140
0.1UF
603
C147
0.1UF
603
ANALOG
DEVICES
C149
0.1UF
603
74LVC74
Approvals
Drawn
AD1938 A
AD1938 B
AGND
A
MJE
Checked
AGND
B
3
AD1938_B_CM
C34
10UF
805
36
AGND5
TP3
AIN3_LP
28
OL1
29
OR1
30
OL2
31
OR2
6
OL3
7
OR3
8
OL4
9
OR4
AUX_DOUT1
2
MCLKI_XI
3
MCLKO_XO
AD1938_B_MCLK_0
AIN3_LN
AUX_DIN2
4
AGND2
AUX_DIN1
32
AGND3
B
AUX_LRCLK
34
AGND4
AUX_CLK
1
AGND1
TDM_DOUT
AD1938_A_CM
C85
10UF
805
36
4
32
34
1
AD1938
LQFP48
TDM_DIN
AOUT4_R
35
FILTR
12
DGND1
25
DGND2
10
RESET
RESET
27
AD1938_B_SSEL
AD1938_MCLK
3
24
MISO
MCLKI_XI
TP7
23
MOSI
2
AD1938_MCLK
26
SCK
C187
5.6NF
0805
AOUT3_R
8
11
C192
390PF
0603
AOUT2_R
6
OL4
R136
562
0603
AOUT1_R
30
OL3
19
AOUT1_L
29
9
AD1938_A_MCLK_0
20
AVDD2
AIN2_LP
OR4
3
SPORT_A_DIN2
TDM_FS
AIN2_LN
28
OL1
26
CCLK
23
CIN
24
COUT
27
CLATCH
MOSI
SPORT_A_DOUT2
AIN1_RP
16
14
OL2
SCK
AIN1_RN
22
40
ADC1LN
39
ADC1LP
42
ADC1RN
41
ADC1RP
44
ADC2LN
43
ADC2LP
46
ADC2RN
45
ADC2RP
AGND5
AUX_CLK
SPORT_A_FS
TDM_CLK
2
AGND2
17
AUX_CLK
18
AUX_LRCLK
15
AUX_DIN1
14
AUX_DIN2
19
AUX_DOUT1
11
AUX_DOUT2
AIN1_LP
21
AGND3
SPORT_A_DIN1
SPORT_A_CLK
AGND4
SPORT_A_DOUT1
AIN1_LN
AGND1
SPORT_A_FS
40
ADC1LN
39
ADC1LP
42
ADC1RN
41
ADC1RP
44
ADC2LN
43
ADC2LP
46
ADC2RN
45
ADC2RP
5
AVDD1
33
AVDD2
37
AVDD3
48
AVDD4
21
TDM_CLK
22
TDM_FS
16
TDM_DIN
20
TDM_DOUT
U7
12
DGND1
25
DGND2
DVDD
R142
22
0603
13
U18
SPORT_A_CLK
5
AVDD1
33
AVDD2
37
AVDD3
48
AVDD4
R143
22
0603
13
2
A3V
Engineering
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
AD1938 - ANALOG AUDIO
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-16-2005_21:40
D
6
of
12
A
B
C
D
REVISIONS
A5V_AMP
5V
A5V_AMP
FER16
600
603
THIS JUMPER ALLOWS FOR POWERING THE
OP-AMPS FROM AN EXTERNAL SUPPLY
WHEN A HIGHER PEAK TO PEAK INPUT OR
OUTPUT VOLTAGE IS REQUIRED
SEE MANUAL FOR MORE DETAILS
FER17
DNP
603
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
R153
10K
0603
JP3
1
REV
2
IDC2X1
2X1
DNP
AIN_VREF
1
AGND
R82
DNP
0603
R81
0
0603
1
R154
10K
0603
CT1
47UF
B
C83
DNP
0603
C202
DNP
0603
AGND
J7
4X2
CON011
AGND
FER12
600
603
2
IN1 LEFT
R155
28.0K
0603
2
C89
4.7UF
0603
U19
C201
4.7UF
0603
R84
237
0603
1
AIN1_L_CON
AIN1_LP
3
AD8608ARU
TSSOP14
3
C79
100PF
0603
R79
5.76K
0603
C91
0.001UF
0603
R80
5.76K
0603
C204
100PF
0603
C82
120PF
0603
R140
24.9K
0603
AGND
AGND
13
C88
4.7UF
0603
U19
C90
0.001UF
0603
R83
237
0603
14
AIN_VREF
2
AIN1_LN
12
2
AD8608ARU
TSSOP14
R124
22.6K
0603
SW1
1
ON
1
3
2
2
4
SWT020
DIP2
R156
22.6K
0603
R78
DNP
0603
R77
0
0603
C81
DNP
0603
C198
DNP
0603
J7
4X2
CON011
3
AGND
FER14
600
603
1
IN1 RIGHT
R157
28.0K
0603
6
C78
4.7UF
0603
U19
C196
4.7UF
0603
R74
237
0603
7
AIN1_R_CON
AIN1_RP
3
5
AD8608ARU
TSSOP14
3
C84
100PF
0603
R75
5.76K
0603
C75
0.001UF
0603
R76
5.76K
0603
C193
100PF
0603
C80
120PF
0603
R138
24.9K
0603
AGND
AGND
9
C77
4.7UF
0603
U19
C74
0.001UF
0603
R73
237
0603
8
AIN_VREF
AIN1_RN
10
AD8608ARU
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
DNP = Do Not Populate
See Manual for Jumper Settings
A5V_AMP
ANALOG
DEVICES
4
C197
0.1UF
603
Approvals
Drawn
MJE
Checked
AGND
Engineering
A
B
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ANALOG IN 1
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-23-2005_15:04
D
7
of
12
A
B
C
D
REVISIONS
R69
DNP
0603
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
R68
0
0603
1
1
C66
DNP
0603
C181
DNP
0603
J7
4X2
CON011
AGND
FER9
600
603
5
IN2 LEFT
R158
28.0K
0603
2
C69
4.7UF
0603
U15
C180
4.7UF
0603
R71
237
0603
1
AIN2_L_CON
AIN2_LP
3
AD8608ARU
TSSOP14
6
C64
100PF
0603
R66
5.76K
0603
C71
0.001UF
0603
R67
5.76K
0603
C188
100PF
0603
C65
120PF
0603
R135
24.9K
0603
AGND
AGND
13
C68
4.7UF
0603
U15
C70
0.001UF
0603
R70
237
0603
14
AIN_VREF
2
AIN2_LN
12
2
AD8608ARU
TSSOP14
R159
22.6K
0603
SW2
1
ON
1
3
2
2
4
SWT020
DIP2
R160
22.6K
0603
R64
DNP
0603
R63
0
0603
C63
DNP
0603
C178
DNP
0603
J7
4X2
CON011
3
AGND
FER10
600
603
4
IN2 RIGHT
R161
28.0K
0603
6
C60
4.7UF
0603
U15
C173
4.7UF
0603
R57
237
0603
7
AIN2_R_CON
AIN2_RP
3
5
AD8608ARU
TSSOP14
6
C67
100PF
0603
R61
5.76K
0603
C57
0.001UF
0603
R62
5.76K
0603
C168
100PF
0603
C62
120PF
0603
R134
24.9K
0603
AGND
AGND
9
C59
4.7UF
0603
U15
C56
0.001UF
0603
R56
237
0603
8
AIN_VREF
AIN2_RN
10
AD8608ARU
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
DNP = Do Not Populate
See Manual for Jumper Settings
A5V_AMP
ANALOG
DEVICES
4
C177
0.1UF
603
Approvals
Drawn
MJE
Checked
AGND
Engineering
A
B
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ANALOG IN 2
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-23-2005_15:04
D
8
of
12
A
B
C
D
REVISIONS
R52
DNP
0603
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
R51
0
0603
1
1
C47
DNP
0603
C160
DNP
0603
J7
4X2
CON011
AGND
FER6
600
603
8
IN3 LEFT
R162
28.0K
0603
2
C51
4.7UF
0603
U12
C159
4.7UF
0603
R54
237
0603
1
AIN3_L_CON
AIN3_LP
3
AD8608ARU
TSSOP14
9
C43
100PF
0603
R49
5.76K
0603
C54
0.001UF
0603
R50
5.76K
0603
C166
100PF
0603
C46
120PF
0603
R132
24.9K
0603
AGND
AGND
13
C50
4.7UF
0603
U12
C53
0.001UF
0603
R53
237
0603
14
AIN_VREF
2
AIN3_LN
12
2
AD8608ARU
TSSOP14
R163
22.6K
0603
SW3
1
ON
1
3
2
2
4
SWT020
DIP2
R164
22.6K
0603
R46
DNP
0603
R45
0
0603
C42
DNP
0603
C156
DNP
0603
J7
4X2
CON011
3
AGND
FER7
600
603
7
IN3 RIGHT
R165
28.0K
0603
6
C39
4.7UF
0603
U12
C155
4.7UF
0603
R42
237
0603
7
AIN3_R_CON
AIN3_RP
3
5
AD8608ARU
TSSOP14
9
C48
100PF
0603
R43
5.76K
0603
C37
0.001UF
0603
R44
5.76K
0603
C151
100PF
0603
C41
120PF
0603
R129
24.9K
0603
AGND
AGND
9
C38
4.7UF
0603
U12
C36
0.001UF
0603
R41
237
0603
8
AIN_VREF
AIN3_RN
10
AD8608ARU
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
DNP = Do Not Populate
See Manual for Jumper Settings
A5V_AMP
ANALOG
DEVICES
4
C157
0.1UF
603
Approvals
Drawn
MJE
Checked
AGND
Engineering
A
B
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ANALOG IN 3
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-23-2005_15:04
D
9
of
12
A
B
C
D
REVISIONS
R37
DNP
0603
REV
DESCRIPTION
ENGR
DATE
1.0
1.1
1.2
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
APPR
R36
0
0603
1
1
C27
DNP
0603
C145
DNP
0603
J7
4X2
CON011
AGND
FER3
600
603
R166
28.0K
0603
2
C144
4.7UF
0603
R40
237
0603
1
11 AIN4_L_CON
IN4 LEFT
C29
4.7UF
0603
U8
AIN4_LP
3
AD8608ARU
TSSOP14
12
C25
100PF
0603
R34
5.76K
0603
C33
0.001UF
0603
R35
5.76K
0603
C148
100PF
0603
C26
120PF
0603
R127
24.9K
0603
AGND
AGND
13
C28
4.7UF
0603
U8
C32
0.001UF
0603
R39
237
0603
14
AIN_VREF
2
AIN4_LN
12
2
AD8608ARU
TSSOP14
R167
22.6K
0603
SW4
1
ON
1
3
2
2
4
SWT020
DIP2
R168
22.6K
0603
R32
DNP
0603
R31
0
0603
C24
DNP
0603
C139
DNP
0603
J7
4X2
CON011
3
AGND
FER5
600
603
R169
28.0K
0603
6
C137
4.7UF
0603
R26
237
0603
7
10 AIN4_R_CON
IN4 RIGHT
C21
4.7UF
0603
U8
AIN4_RP
3
5
AD8608ARU
TSSOP14
12
C30
100PF
0603
R29
5.76K
0603
C19
0.001UF
0603
R30
5.76K
0603
C133
100PF
0603
C23
120PF
0603
R126
24.9K
0603
AGND
AGND
9
C20
4.7UF
0603
U8
C18
0.001UF
0603
R25
237
0603
8
AIN_VREF
AIN4_RN
10
AD8608ARU
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
DNP = Do Not Populate
See Manual for Jumper Settings
A5V_AMP
ANALOG
DEVICES
4
C141
0.1UF
603
Approvals
Drawn
MJE
Checked
AGND
Engineering
A
B
C
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ANALOG IN 4
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-23-2005_15:04
D
10
of
12
A
B
C
D
REVISIONS
C104
270PF
0603
6
R97
4.99K
0603
R102
604
0603
U21
R93
4.99K
0603
J8
4X2
CON011
C213
4.7UF
0603
DATE
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
AOUT1_L_CON
2
APPR
C221
2200PF
0603
J8
4X2
CON011
C212
4.7UF
0603
1
AOUT1_R_CON
1
1
3
AD8608ARU
TSSOP14
3
R170
4.99K
0603
R101
604
0603
U21
R86
4.99K
0603
AOUT1_R
AD8608ARU
TSSOP14
C100
220PF
0603
R171
3.32K
0603
R85
4.99K
0603
5
R145
49.9K
0603
C96
220PF
0603
AGND
3
R179
4.99K
0603
C220
2200PF
0603
R144
49.9K
0603
AGND
C93
270PF
0603
C105
270PF
0603
R177
3.32K
0603
13
R104
604
0603
U21
R87
4.99K
0603
J8
4X2
CON011
C215
4.7UF
0603
9
14
AOUT2_L
AOUT2_L_CON
5
C97
220PF
0603
C223
2200PF
0603
J8
4X2
CON011
C214
4.7UF
0603
8
AOUT2_R_CON
4
10
AD8608ARU
TSSOP14
6
R181
4.99K
0603
R103
604
0603
U21
R94
4.99K
0603
AOUT2_R
AD8608ARU
TSSOP14
2
R172
3.32K
0603
R98
4.99K
0603
12
R147
49.9K
0603
C101
220PF
0603
AGND
6
R180
4.99K
0603
C222
2200PF
0603
R146
49.9K
0603
2
AGND
C106
270PF
0603
C94
270PF
0603
R176
3.32K
0603
13
R99
4.99K
0603
ENGR
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
2
7
AOUT1_L
R88
4.99K
0603
DESCRIPTION
1.0
1.1
1.2
C92
270PF
0603
R178
3.32K
0603
1
REV
R106
604
0603
U22
R95
4.99K
0603
J8
4X2
CON011
C217
4.7UF
0603
9
14
AOUT3_L_CON
R89
4.99K
0603
8
12
AOUT3_L
C225
2200PF
0603
J8
4X2
CON011
C216
4.7UF
0603
8
AOUT3_R_CON
7
10
AD8608ARU
TSSOP14
9
R183
4.99K
0603
R105
604
0603
U22
R90
4.99K
0603
AOUT3_R
AD8608ARU
TSSOP14
C102
220PF
0603
R173
3.32K
0603
R149
49.9K
0603
C98
220PF
0603
9
R182
4.99K
0603
C224
2200PF
0603
R148
49.9K
0603
3
3
AGND
AGND
C95
270PF
0603
C107
270PF
0603
R175
3.32K
0603
6
R92
4.99K
0603
R91
4.99K
0603
R108
604
0603
U22
J8
4X2
CON011
C219
4.7UF
0603
2
7
AOUT4_L_CON
R100
4.99K
0603
11
5
AOUT4_L
C227
2200PF
0603
R151
49.9K
0603
C103
220PF
0603
C226
2200PF
0603
ANALOG
DEVICES
Approvals
Drawn
MJE
Checked
AGND
Engineering
A
B
C
R150
49.9K
0603
ANALOG OUTPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
DNP = Do Not Populate
See Manual for Jumper Settings
AGND
C210
0.1UF
603
10
12
R184
4.99K
0603
4
AGND
AOUT4_R_CON
AD8608ARU
TSSOP14
A5V_AMP
C209
0.1UF
603
C218
4.7UF
0603
3
AGND
A5V_AMP
J8
4X2
CON011
1
12
R185
4.99K
0603
R107
604
0603
U22
R96
4.99K
0603
AOUT4_R
AD8608ARU
TSSOP14
C99
220PF
0603
R174
3.32K
0603
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ANALOG OUT 1
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-23-2005_9:58
D
11
of
12
A
B
C
D
REVISIONS
C4
270PF
0603
6
R16
4.99K
0603
R7
604
0603
U5
R15
4.99K
0603
J4
4X2
CON011
C123
4.7UF
0603
DATE
MJE
MJE
MJE
03/17/05
06/01/05
06/01/05
AOUT5_L_CON
2
APPR
C114
2200PF
0603
J4
4X2
CON011
C124
4.7UF
0603
1
AOUT5_R_CON
1
1
3
AD8608ARU
TSSOP14
3
R199
4.99K
0603
R8
604
0603
U5
R20
4.99K
0603
AOUT5_R
AD8608ARU
TSSOP14
C8
220PF
0603
R187
3.32K
0603
R24
4.99K
0603
5
R117
49.9K
0603
C13
220PF
0603
AGND
3
R198
4.99K
0603
C115
2200PF
0603
R118
49.9K
0603
AGND
C16
270PF
0603
C3
270PF
0603
R193
3.32K
0603
13
R5
604
0603
U5
R19
4.99K
0603
J4
4X2
CON011
C121
4.7UF
0603
9
14
AOUT6_L
AOUT6_L_CON
5
C12
220PF
0603
C112
2200PF
0603
J4
4X2
CON011
C122
4.7UF
0603
8
AOUT6_R_CON
4
10
AD8608ARU
TSSOP14
6
R200
4.99K
0603
R6
604
0603
U5
R14
4.99K
0603
AOUT6_R
AD8608ARU
TSSOP14
2
R188
3.32K
0603
R13
4.99K
0603
12
R115
49.9K
0603
C7
220PF
0603
AGND
6
R197
4.99K
0603
C113
2200PF
0603
R116
49.9K
0603
2
AGND
C2
270PF
0603
C15
270PF
0603
R192
3.32K
0603
13
R12
4.99K
0603
ENGR
Initial Release
Refer to ECO2005-073
Refer to ECO2005-094
2
7
AOUT5_L
R23
4.99K
0603
DESCRIPTION
1.0
1.1
1.2
C17
270PF
0603
R186
3.32K
0603
1
REV
R3
604
0603
U4
R11
4.99K
0603
J4
4X2
CON011
C119
4.7UF
0603
9
14
AOUT7_L_CON
R22
4.99K
0603
8
12
AOUT7_L
C110
2200PF
0603
J4
4X2
CON011
C120
4.7UF
0603
8
AOUT7_R_CON
7
10
AD8608ARU
TSSOP14
9
R201
4.99K
0603
R4
604
0603
U4
R18
4.99K
0603
AOUT7_R
AD8608ARU
TSSOP14
C6
220PF
0603
R189
3.32K
0603
R113
49.9K
0603
C11
220PF
0603
9
R196
4.99K
0603
C111
2200PF
0603
R114
49.9K
0603
3
3
AGND
AGND
C14
270PF
0603
C1
270PF
0603
R191
3.32K
0603
6
R21
4.99K
0603
R17
4.99K
0603
R1
604
0603
U4
J4
4X2
CON011
C117
4.7UF
0603
2
7
AOUT8_L_CON
R9
4.99K
0603
11
5
AOUT8_L
C108
2200PF
0603
R111
49.9K
0603
C5
220PF
0603
C109
2200PF
0603
ANALOG
DEVICES
Approvals
Drawn
MJE
Checked
AGND
Engineering
A
B
C
R112
49.9K
0603
ANALOG OUTPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
DNP = Do Not Populate
See Manual for Jumper Settings
AGND
C128
0.1UF
603
10
12
R195
4.99K
0603
4
AGND
AOUT8_R_CON
AD8608ARU
TSSOP14
A5V_AMP
C129
0.1UF
603
C118
4.7UF
0603
3
AGND
A5V_AMP
J4
4X2
CON011
1
12
R194
4.99K
0603
R2
604
0603
U4
R10
4.99K
0603
AOUT8_R
AD8608ARU
TSSOP14
C10
220PF
0603
R190
3.32K
0603
Date
03/17/05
Board No.
C
Date
Nashua, NH 03063
4
PH: 1-800-ANALOGD
Blackfin Audio EZ-Extender
ANALOG OUT 2
Title
Size
20 Cotton Road
Rev
A0195-2005
1.2
Sheet
6-23-2005_9:58
D
12
of
12
I
INDEX
A
AD1938 analog audio codecs, viii, 1-2, 1-5,
2-2, 2-6, 2-7
MCLK source jumper (JP2), 2-6
ADAV801 dual analog/digital audio codecs,
viii, 1-3, 1-4, 2-2
ADSP-BF537 EZ-KIT Lite select jumper
(JP1.1/2), 2-5
analog
audio data streams, 1-3, 2-2
audio interface, viii, 1-2, 2-2
input gain switches (SW1-4), 2-7
input/output pins, 1-4
stereo input/output, 1-4
analog-to-digital converters (ADCs), 1-2
architecture, of this Audio EZ-Extender, 2-2
audio interfaces
See analog audio interface, digital audio
interface
auxiliary serial ports, 1-3, 1-5
B
bill of materials, A-1
board layout, 2-2
configuration, of this Audio EZ-Extender, 1-1
connectors, locations of, 2-2
customer support, x
D
digital
audio data steams, 2-2
audio interface, viii, 1-4, 2-2
input channels, 1-3
stereo input/output, 1-4
digital-to-analog converters (DACs), 1-2
E
expansion interface, of EZ-KIT Lite, vii
external
clocks, 1-5
master clock (MCLK) signal, 1-4
oscillators, 1-5
EZ-KIT Lites
SPORT0 enable jumper (JP1.3/4), 2-6
SPORT1 enable jumper (JP1.5/6), 2-6
F
frame sync signals, 1-4, 2-2
C
clock
frequencies, 1-4, 2-6
signals, 1-4, 2-2
Blackfin Audio EZ-Extender Manual
I
I2S mode, 1-5, 2-2
input/output digital streams, 1-3
I-1
INDEX
interfaces
analog audio, viii
analog audio interface, 1-2
digital audio, viii, 1-4
internal clocks, 1-5
J
jumpers
locations of, 2-2, 2-5
JP1.1/2 jumper (ADSP-BF537 EZ-KIT Lite
select), 2-5
JP1.3/4 (EZ-KIT Lite SPORT0 enable), 2-6
JP1.5/6 (EZ-KIT Lite SPORT1 enable), 2-6
JP1.7/8 (SPORT select), 2-6
JP2 (MCLK source), 1-4, 2-6
JP4 (SPDIF loopback), 2-7
M
master clock (MCLK), 2-6
MCLK source jumper (JP2), 2-6
multibit sigma-delta architecture, 1-2
N
R
RCA jacks, viii, 1-4
S
sample rates, 1-3, 1-4, 2-2, 2-6
secondary serilal port, 1-5
serial peripheral interface (SPI), 1-2, 1-5, 2-4
select signals, 2-5
serial ports (SPORTs), 1-2, 1-3, 2-2
select jumper (JP1.7/8), 2-6
setup, of this Audio EZ-Extender, 1-1
Sony Philips Digital Interface, See SPDIF
SPDIF
input/output, 1-5
loopback jumper (JP4), 2-7
transceiver, viii
SPORT0 signals, 2-6
SPORT1 signals, 2-6
supported EZ-KIT Lites, xi
SW1-4 (analog input gain) switches, 2-7
SYSCLK1 pin, 1-4, 2-6
SYSCLK3 pin, 1-4, 1-5, 2-6
system architecture, 2-2
notation conventions, xiii
T
P
time-division multiplexed (TDM) mode, 1-3,
2-2
TX/RX pins, 2-2
phase-locked loop (PLL), 1-4, 1-5
primary serial port, 1-5
product overview, vii
I-2
Blackfin Audio EZ-Extender Manual