LH1501, LH1511, LH1536 1 Form B Absolute Maximum Ratings TA=25°C Stresses in excess of the Absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the Parameter Symbol device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to Absolute Maximum Ratings for extended periods of time can adversely affect reliability. Test Conditions LH1501 LH1511 Units — –40 to +85 –40 to +85 °C Ambient Operating Temperature Range TA Storage Temperature Range Tstg — –40 to +150 –40 to +150 °C Pin Soldering Temperature TS t=10 s max 260 260 °C Input/Output Isolation Test Voltage VISO Vrms t=1 s IISO=10 µA max 5300 5300 Vrms LED Continuous Forward Current IF 50 50 mA LED Reverse Voltage VR IR ≤ 10 µA 8 8 V dc or Peak ac Load Voltage VL IL ≤ 50 µA 350 200 V Continuous dc Load Current Bidirectional Operation Unidirectional Operation IL 150 250 200 350 mA mA Peak Load Current IP t=100 ms (single shot) 400 600 mA — 550 550 mW Output Power Dissipation (continuous) — — PDISS Recommended Operating Conditions 150 200 IFOFF = IFOFF = 5 mA to 20 mA 120 LOAD CURRENT (mA) LOAD CURRENT (mA) 5 mA to 20 mA 90 IFOFF = 2 mA IFOFF = 3 mA IFOFF = 4 mA 60 30 LH1501 0 –40 –20 20 40 LOAD CURRENT (mA) 300 60 IFOFF = 2 mA IFOFF = 3 mA IFOFF = 4 mA 80 40 0 –40 80 IFOFF = 4 mA to 20 mA 200 150 IFOFF = 1 mA IFOFF = 2 mA IFOFF = 3 mA 50 0 20 40 –20 0 20 40 60 AMBIENT TEMPERATURE (°C) 250 LH1536 0 –40 –20 120 LH1511 0 AMBIENT TEMPERATURE (°C) 100 160 60 80 AMBIENT TEMPERATURE (°C) 1 80 Electrical Characteristics TA=25°C Minimum and maximum values are testing requirements. Typical values are characteristics of the device Parameter LED Forward Current for Switch Turn-off I N P U T Symbol IFoff and are the result of engineering evaluations. Typical values are for information purposes only and are not part of the testing requirements. Test Conditions — VL LED Forward Current for Switch Turn-on IFon t=10 ms IL LED Forward Voltage ON-resistance ac/dc Pins 4, 6 (+) to 5 (–) dc Pins 4, 6 (+) to 5 (–) VF RON IF=10 mA IF=0 mA IL=50 mA IF=0 mA IL=100 mA OFF-resistance Off-state Leakage Current ROFF — O U T P U T IF=5 mA VL=±100 V IF=5 mA VL=±100 V IF=5 mA VL Output Capacitance — IF=5 mA VL=1 V IF=5 mA VL=50 V Switch Offset Input/Output Capacitance Turn-off Time Turn-on Time — CISO toff ton IF=0 mA VISO=1 V Values LH1501 LH1511 Units Min — — mA Typ 1.0 1.0 mA Max 2.0 2.0 mA ± 300 150 V Min 0.2 0.2 mA mA Typ 0.9 0.9 Max — — mA ± 150 200 mA Min 1.15 1.15 V V Typ 1.26 1.26 Max 1.45 1.45 V Min 12 6 Ω Typ 20 10 Ω Ω Max 25 15 Min 3.00 1.50 Ω Typ 5.00 2.50 Ω Max 6.25 3.75 Ω Min 0.1 0.1 GΩ Typ 1.4 1.4 GΩ Max — — GΩ Min — — µA Typ 0.07 0.07 µA Max 1.0 1.0 µA Min — — µA Typ 0.08 0.07 µA µA Max 1.0 1.0 ± 350 200 V Min — — pF Typ 45 35 pF Max — — pF Min — — pF Typ 10 15 pF Max — — pF Min — — µV Typ 0.1 0.1 µV Max — — µV Min — — pF pF Typ 0.8 0.8 Max — — pF IF=5 mA Min — — ms IL=50 mA Typ 2.0 1.0* ms ms Max 3.0 3.0* IF=5 mA Min — — ms IL=50 mA Typ 1.0 1.2* ms Max 3.0 3.0* ms * IF=10 mA. LH1501, LH1511, LH1536 2 A. LED Voltage vs. Temperature B. LED Dropout Voltage vs. Temperature 1.6 1.20 LED FORWARD VOLTAGE (V) LED FORWARD VOLTAGE (V) IL = 100 mA 1.5 IF = 50 mA IF = 20 mA 1.4 1.3 1.2 IF = 1 mA IF = 2 mA 1.1 IF = 5 mA 1.15 TYP. 1.10 MIN. 1.05 1.00 IF = 10 mA 1.0 –40 –20 20 0 40 60 0.95 –40 80 40 60 80 D. ON-Resistance vs. Temperature 50 100 CHANGE IN ON-RESISTANCE (%) NORMALIZED TO 25°C LED FORWARD CURRENT FOR SWITCH TURN-OFF (%) NORMALIZED TO 25 °C C. LED Current for Switch Turn-Off vs. Temperature IL = 100 mA 80 LH1501, LH1511, LH1536 60 40 20 0 –20 –40 –20 0 20 40 60 40 30 20 10 0 –10 –20 IL = 50 mA –30 –40 –40 80 LH1501,LH1511, LH1536 –20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) E. Switch Capacitance vs. Applied Voltage F. Output Isolation 100 80 IF = 5 mA TA = 25 °C f = 1 MHz 70 50 80 ISOLATION (dB) 60 CAPACITANCE (pF) 20 AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) –60 –40 0 –20 A – LH1511 B – LH1501 40 30 20 60 40 IF = 10 mA VP = 10 V RL = 50 Ω 20 10 0 102 0 0 20 40 60 80 100 103 104 105 106 107 FREQUENCY (Hz) APPLIED VOLTAGE (V) LH1501, LH1511, LH1536 3 H. Leakage Current vs. Applied Voltage @ 25°C G. Insertion Loss vs. Frequency 0.30 OFF-STATE LEAKAGE CURRENT (nA) RL = 600 Ω 0.25 INSERTION LOSS (dB) 400 A 0.20 A – LH1501 B – LH1511 C – LH1536 0.15 B 0.10 C 0.05 0 10 2 10 3 10 4 LH1501, LH1511 360 IF = 20 mA 320 280 240 200 IF = 10 mA 160 120 80 IF = 5 mA 40 IF = 2 mA 0 10 5 0 50 100 I. Leakage Current vs. Applied Voltage @ 50°C OFF-STATE LEAKAGE CURRENT (nA) OFF-STATE LEAKAGE CURRENT (nA) 500 IF = 20 mA 400 300 IF = 10 mA 200 IF = 5 mA 100 IF = 2 mA 0 150 200 250 300 350 LH1501, LH1511 600 500 IF = 20 mA 400 300 IF = 10 mA 200 IF = 5 mA 100 IF = 2 mA 0 400 0 50 100 LOAD VOLTAGE (V) CHANGE IN BREAKDOWN VOLTAGE (%) NORMALIZED TO 25 °C OFF-STATE LEAKAGE CURRENT (nA) IF = 20 mA LH1501, LH1511 600 500 IF = 10 mA 400 IF = 5 mA 300 IF = 2 mA 200 100 0 100 150 200 250 200 250 300 350 400 L. Switch Breakdown Voltage vs. Temperature 700 50 150 LOAD VOLTAGE (V) K. Leakage Current vs. Applied Voltage @ 85°C 0 350 700 LH1501, LH1511 600 100 300 250 J. Leakage Current vs. Applied Voltage @ 70°C 700 50 200 LOAD VOLTAGE (V) FREQUENCY (Hz) 0 150 300 350 400 LOAD VOLTAGE (V) 8 6 LH1501, LH1511, LH1536 4 2 0 –2 –4 –6 –8 –40 –20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) LH1501, LH1511, LH1536 4 M. Switch Offset Voltage vs. Temperature N. Turn-On/Off vs. Temperature 3.5 CHANGE IN TURN-ON/OFF TIME (%) NORMALIZED TO 25 °C SWITCH OFFSET VOLTAGE (µV) LH1501, LH1511, 3.0 LH1536 2.5 2.0 1.5 1.0 0.5 0 20 30 40 50 60 80 70 90 90 80 ton 70 60 50 40 30 20 10 0 –10 –20 A –30 –40 B –50 –40 –20 B toff LH1501, LH1511 O. Turn-On Time vs. LED Current toff LH1536 0 20 40 IL = 50 mA –40 °C TURN-OFF TIME (ms) 25 °C 1.0 0.5 30 40 6 4 –40 °C 25 °C 85 °C 2 85 °C 20 LH1501, LH1511 8 1.5 10 80 IL = 50 mA LH1501, LH1511 2.0 0 60 P. Turn-Off Time vs. LED Current 10 2.5 A AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) TURN-ON TIME (ms) IF = 5 mA IL = 50 mA 0 50 0 LED FORWARD CURRENT (mA) 10 20 30 40 50 LED FORWARD CURRENT (mA) LH1501, LH1511, LH1536 5