Bulletin PD-20631 rev. A 09/01 113CNQ...A SERIES 110 Amp SCHOTTKY RECTIFIER New GenIII D-61 Package Description/Features Major Ratings and Characteristics Characteristics IF(AV) Rectangular 113CNQ...A Units 110 A 80 to 100 V waveform VRRM range IFSM @ tp = 5 µs sine 7000 A VF @55 Apk, TJ= 125°C 0.67 V TJ (per leg) The 113CNQ...A center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 °C TJ operation Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation range - 55 to 175 °C Guard ring for enhanced ruggedness and long term reliability New fully transfer-mold low profile, small footprint, high current package Case Styles 113CNQ...A D61-8 www.irf.com 113CNQ...ASM D61-8-SM 113CNQ...ASL D61-8-SL 1 113CNQ...A Series Bulletin PD-20631 rev. A 09/01 Voltage Ratings Part number VR 113CNQ080A 113CNQ100A 80 100 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 113CNQ Units IF(AV) Max. Average Forward Current IFSM * See Fig. 5 (Per Leg) (Per Device) 55 Conditions A 50% duty cycle @ TC = 150 °C, rectangular wave form A 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 110 Max. Peak One Cycle Non-Repetitive 7000 Surge Current (Per Leg) * See Fig. 7 720 EAS Non-Repetitive Avalanche Energy (Per Leg) 15 mJ TJ = 25 °C, IAS = 1 Amps, L = 30 mH IAR Repetitive Avalanche Current (Per Leg) 1 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 113CNQ Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Conditions 0.81 1.00 0.66 V V V @ 55A @ 110A @ 55A 0.79 V @ 110A Max. Reverse Leakage Current 1.0 mA TJ = 25 °C (Per Leg) * See Fig. 2 32 mA TJ = 125 °C 1960 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C 5.5 nH Measured lead to lead 5mm from package body 10000 V/ µs (1) CT Max. Junction Capacitance (Per Leg) LS Typical Series Inductance (Per Leg) dv/dt Max. Voltage Rate of Change (Rated VR) TJ = 25 °C TJ = 125 °C (1) Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 113CNQ Units TJ Max. Junction Temperature Range -55 to 175 Tstg Max. Storage Temperature Range -55 to 175 VR = rated VR Conditions °C °C RthJC Max. Thermal Resistance Junction to Case (Per Leg) 0.5 °C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 0.25 °C/W DCoperation RthCS Typical Thermal Resistance, Case to Heatsink (D61-8 Only) 0.30 °C/W Mounting surface , smooth and greased Device flatness < 5mls wt Approximate Weight T MountingTorque Min. 7.8 (0.28) 12 (10) (D61-8 Only) Max. 24 (20) * See Fig. 4 g (oz.) Kg-cm (*) (Ibf-in) (*) Recommended hardware 3M stainless screw 2 www.irf.com 113CNQ...A Series Bulletin PD-20631 rev. A 09/01 1000 1000 Tj = 175˚C Reverse Current - I R (mA) 100 150˚C 125˚C 10 100˚C 75˚C 1 50˚C 0.1 25˚C 0.01 0.001 0 20 40 60 80 100 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 10000 10 Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) 100 Tj = 175˚C Tj = 125˚C Tj = 25˚C 1 0 0.5 1 1.5 2 2.5 Tj = 25˚C 1000 100 Forward Voltage Drop - VFM (V) 0 20 40 60 80 Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 100 Thermal Impedance - Z thJC (°C/W) 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.01 PDM t1 Single Pulse (Thermal Resistance) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 113CNQ...A Series Bulletin PD-20631 rev. A 09/01 60 170 Average Power Loss (Watts) Allowable Case Temperature (°C) 180 DC 160 150 140 Square wave (D = 0.50) 130 80% Rated Vr applied 120 see note (2) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 50 40 30 RMS Limit DC 20 10 110 0 0 10 20 30 40 50 60 70 80 90 0 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) 10 20 30 40 50 60 70 Average Forward Current - IF(AV) (A) 80 Fig. 6 - Forward Power Loss Characteristics (Per Leg) Non-Repetitive Surge Current - I FSM (A) 10000 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 113CNQ...A Series Bulletin PD-20631 rev. A 09/01 Outline Table Outline D61-8 Dimensions are in millimeters and (inches) Outline D61-8-SM Dimensions are in millimeters and (inches) www.irf.com 5 113CNQ...A Series Bulletin PD-20631 rev. A 09/01 Outline Table Outline D61-8-SL Dimensions are in millimeters and (inches) Marking Information INTERNATIONAL RECTIFIER LOGO THIS IS A 113CNQ100A WITH LOT CODE 89 09 ASSEMBLED ON WW 45, 2000 IN THE ASSEMBLY LINE "A" 113CNQ100A 89 09 ASSEMBLY LOT CODE 6 PART NUMBER 045A DATE CODE YEAR 0 = 2000 WEEK 45 LINE A www.irf.com 113CNQ...A Series Bulletin PD-20631 rev. A 09/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01 www.irf.com 7