IRF IRF7321D2

PD- 91667D
IRF7321D2
TM
FETKY MOSFET & Schottky Diode
l
l
l
l
l
l
Co-packaged HEXFET® Power
MOSFET and Schottky Diode
Ideal For Buck Regulator Applications
P-Channel HEXFET®
Low VF Schottky Rectifier
Generation 5 Technology
SO-8 Footprint
A
A
S
G
1
8
K
2
7
K
3
6
4
5
D
D
VDSS = -30V
RDS(on) = 0.062Ω
Schottky Vf = 0.52V
Top View
Description
The FETKYTM family of Co-packaged HEXFETs and
Schottky diodes offer the designer an innovative board
space saving solution for switching regulator and
power management applications. Generation 5
HEXFETs utilize advanced processing techniques to
achieve extremely low on-resistance per silicon area.
Combinining this technology with International
Rectifier's low forward drop Schottky rectifiers results in
an extremely efficient device suitable for use in a wide
variety of portable electronics applications.
SO-8
The SO-8 has been modified through a customized
leadframe for enhanced thermal characteristics. The
SO-8 package is designed for vapor phase, infrared or
wave soldering techniques.
Absolute Maximum Ratings ( TA = 25°C Unless Otherwise Noted)
ID @ TA = 25°C
ID @ TA = 70°C
IDM
PD @TA = 25°C
PD @TA = 70°C
VGS
dv/dt
TJ, TSTG
Parameter
Maximum
Units
Continuous Drain Current, VGS @ -10V
-4.7
-3.8
-38
2.0
1.3
16
± 20
-5.0
-55 to +150
A
Pulsed Drain Current À
Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Peak Diode Recovery dv/dt Á
Junction and Storage Temperature Range
W
mW/°C
V
V/ns
°C
Thermal Resistance Ratings
Parameter
RθJA
Junction-to-Ambient Ã
Maximum
Units
62.5
°C/W
Notes:
 Repetitive rating – pulse width limited by max. junction temperature (see fig. 11)
‚ ISD ≤ -2.9A, di/dt ≤ -77A/µs, VDD ≤ V(BR)DSS, TJ ≤ 150°C
ƒ Pulse width ≤ 300µs – duty cycle ≤ 2%
„ Surface mounted on FR-4 board, t ≤ 10sec.
1
www.irf.com
10/15/04
IRF7321D2
MOSFET Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
V(BR)DSS
Parameter
Drain-to-Source Breakdown Voltage
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
gfs
Gate Threshold Voltage
Forward Transconductance
IDSS
Drain-to-Source Leakage Current
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Min.
-30
–––
–––
-1.0
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
0.042
0.076
–––
7.7
–––
–––
–––
–––
23
3.8
5.9
13
13
34
32
710
380
180
Max. Units
Conditions
–––
V
VGS = 0V, ID = -250µA
0.062
VGS = -10V, ID = -4.9A ƒ
Ω
0.098
VGS = -4.5V, ID = -3.6A ƒ
–––
V
VDS = VGS, I D = -250µA
–––
S
VDS = -15V, I D = -4.9A
-1.0
VDS = -24V, VGS = 0V
µA
-25
VDS = -24V, VGS = 0V, TJ = 55°C
100
VGS = -20V
nA
-100
VGS = 20V
34
ID = -4.9A
5.7
nC VDS = -15V
8.9
VGS = -10V, See Fig. 6 ƒ
19
VDD = -15V
20
ID = -1.0A
ns
51
RG = 6.0Ω
48
RD = 15Ω, ƒ
–––
VGS = 0V
–––
pF
VDS = -25V
–––
ƒ = 1.0MHz, See Fig. 5
MOSFET Source-Drain Ratings and Characteristics
IS
I SM
VSD
t rr
Q rr
Parameter
Min.
Continuous Source Current(Body Diode) –––
Pulsed Source Current (Body Diode)
–––
Body Diode Forward Voltage
–––
Reverse Recovery Time (Body Diode) –––
Reverse Recovery Charge
–––
Typ.
–––
–––
-0.78
44
42
Max. Units
Conditions
-2.5
A
-30
-1.0
V
TJ = 25°C, IS = -1.7A, VGS = 0V
66
ns
TJ = 25°C, I F = -1.7A
63
nC di/dt = 100A/µs ƒ
Schottky Diode Maximum Ratings
If (av)
I SM
Parameter
Max. Average Forward Current
Max. peak one cycle Non-repetitive
Surge current
Max. Units
3.2
A
2.0
200
20
A
Conditions
50% Duty Cycle. Rectangular Wave, Tc = 25°C
See Fig.14
Tc = 70°C
5µs sine or 3µs Rect. pulse
Following any rated
10ms sine or 6ms Rect. pulse load condition &
with Vrrm applied
Schottky Diode Electrical Specifications
Vfm
Parameter
Max. Forward voltage drop
Irm
Max. Reverse Leakage current
Ct
dv/dt
Max. Junction Capacitance
Max. Voltage Rate of Charge
Max. Units
0.57
0.77
V
0.52
0.79
0.30
mA
37
310 pF
4900 V/µs
Conditions
If = 3.0, Tj = 25°C
If = 6.0, Tj = 25°C
If = 3.0, Tj = 125°C
If = 6.0, Tj = 125°C .
Vr = 30V
Tj = 25°C
Tj = 125°C
Vr = 5Vdc ( 100kHz to 1 MHz) 25°C
Rated Vr
( HEXFET is the reg. TM for International Rectifier Power MOSFET's )
2
www.irf.com
IRF7321D2
Power Mosfet Characteristics
100
100
VGS
- 15V
- 10V
- 7.0V
- 5.5V
- 4.5V
- 4.0V
- 3.5V
BOTTOM - 3.0V
VGS
- 15V
- 10V
- 7.0V
- 5.5V
- 4.5V
- 4.0V
- 3.5V
BOTTOM - 3.0V
TOP
-I D , Drain-to-Source Current (A)
-I D , Drain-to-Source Current (A)
TOP
10
-3.0V
20µs PULSE WIDTH
TJ = 25°C
A
1
0.1
1
10
-3.0V
20µs PULSE WIDTH
TJ = 150°C
A
1
10
0.1
-VDS, Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
2.0
RDS(on) , Drain-to-Source On Resistance
(Normalized)
-I D , Drain-to-Source Current (A)
TJ = 25°C
TJ = 150°C
10
V DS = -10V
20µs PULSE WIDTH
3.0
3.5
4.0
4.5
5.0
5.5
-VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
10
Fig 2. Typical Output Characteristics
100
1
1
-VDS , Drain-to-Source Voltage (V)
6.0
A
-4.9A
ID =-4.9A
1.5
1.0
0.5
0.0
-60 -40 -20
-10V
VGS =-10V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRF7321D2
Power Mosfet Characteristics
1400
Crss = Cgd
Coss = Cds + Cgd
1200
C, Capacitance (pF)
20
1000
Ciss
800
Coss
600
400
Crss
200
0
10
VDS =-15V
16
12
8
4
0
A
1
100
0
10
20
30
40
QG , Total Gate Charge (nC)
- V DS , Drain-to-Source Voltage (V)
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
100
100
OPERATION IN THIS AREA LIMITED
BY RDS(on)
-IID , Drain Current (A)
-ISD , Reverse Drain Current (A)
ID = -4.9A
SHORTED
-VGS , Gate-to-Source Voltage (V)
VGS = 0V
f = 1 MHz
Ciss = Cgs + Cgd + Cds
TJ = 150°C
10
TJ = 25°C
VGS = 0V
1
0.4
0.6
0.8
1.0
1.2
-VSD , Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
A
1.4
100us
10
1ms
TC = 25 °C
TJ = 150 °C
Single Pulse
1
1
10ms
10
100
-VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRF7321D2
Power Mosfet Characteristics
Thermal Response (Z thJA )
100
0.50
0.20
10
0.10
0.05
0.02
1
PDM
0.01
t1
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJA + TA
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
0.6
0.5
0.4
0.3
V GS = -4.5V
0.2
0.1
VGS = -10V
0.0
0
10
20
-I D , Drain Current (A)
Fig 10. Typical On-Resistance Vs. Drain
Current
www.irf.com
30
A
RDS (on) , Drain-to-Source On Resistance (Ω)
RDS (on) , Drain-to-Source On Resistance (Ω)
Fig 9. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
0.16
0.12
0.08
I D = -4.9A
0.04
0.00
0
3
6
9
12
15
-V GS , Gate -to-Source Voltage (V)
Fig 11. Typical On-Resistance Vs. Gate
Voltage
5
A
IRF7321D2
Schottky Diode Characteristics
100
100
J Reverse Current - IR (mA)
10
TJ = 150°C
1
0.1
0.01
0.001
TJ = 125°C
)
0
10
20
30
R TJ = 25°C
Fig. 13 - Typical Values of
Reverse Current Vs. Reverse Voltage
1
0.1
0.0
0.2
0.4
0.6
0.8
1.0
Forward Voltage Drop - V FM (V)
Forward Voltage Drop - VF (V)
Fig. 12 - Typical Forward Voltage Drop
Characteristics
Allowable Am bient Temperature - (°C)
Instantaneous Forward Current - IF (A)
10
160
V r = 80% Rated
R thJA = 62.5°C/W
Square wave
140
120
100
DC
80
60
40
20
D = 3/4
D = 1/2
D =1/3
D = 1/4
D = 1/5
A
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Average Forward Current - I F(AV) (A)
Fig.14 - Maximum Allowable Ambient
Temp. Vs. Forward Current
6
www.irf.com
IRF7321D2
SO-8 (Fetky) Package Outline
Dimensions are shown in millimeters (inches)
D
DIM
B
5
A
8
6
7
6
H
E
0.25 [.010]
1
2
3
A
4
MIN
.0532
.0688
1.35
1.75
A1 .0040
.0098
0.10
0.25
b
.013
.020
0.33
0.51
c
.0075
.0098
0.19
0.25
D
.189
.1968
4.80
5.00
E
.1497
.1574
3.80
4.00
e
.050 BAS IC
1.27 BAS IC
6X
e1
.025 BAS IC
0.635 BAS IC
.2284
.2440
5.80
6.20
K
.0099
.0196
0.25
0.50
L
.016
.050
0.40
1.27
y
0°
8°
0°
8°
K x 45°
A
C
y
0.10 [.004]
8X b
0.25 [.010]
MAX
H
e1
e
MILLIMET ERS
MAX
A
5
INCHES
MIN
A1
8X L
8X c
7
C A B
FOOTPRINT
NOT ES:
1. DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994.
2. CONT ROLLING DIMENS ION: MILLIMET ER
8X 0.72 [.028]
3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES ].
4. OUT LINE CONFORMS TO JEDEC OUT LINE MS-012AA.
5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROT RUSIONS NOT T O EXCEED 0.15 [.006].
6.46 [.255]
6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROT RUSIONS NOT T O EXCEED 0.25 [.010].
7 DIMENS ION IS THE LENGT H OF LEAD FOR SOLDERING TO
A S UBST RAT E.
3X 1.27 [.050]
8X 1.78 [.070]
SO-8 (Fetky) Part Marking Information
EXAMPLE: THIS IS AN IRF7807D1 (FETKY)
INTERNATIONAL
RECTIFIER
LOGO
www.irf.com
XXXX
807D1
DAT E CODE (YWW)
P = DIS GNATES LEAD - FREE
PRODUCT (OPTIONAL)
Y = LAS T DIGIT OF THE YEAR
WW = WEEK
A = AS S EMBLY S ITE CODE
LOT CODE
PART NUMBER
7
IRF7321D2
SO-8 (Fetky) Tape and Reel
Dimensions are shown in millimeters (inches)
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information. 10/04
8
www.irf.com