PD-2.333 rev. A 12/97 30CPQ080 30CPQ100 SCHOTTKY RECTIFIER 30 Amp Major Ratings and Characteristics Characteristics Description/Features 30CPQ... Units 30 A 80/100 V IFSM @ tp = 5 µs sine 920 A VF 0.67 V - 55 to 175 °C IF(AV) Rectangular waveform VRRM @ 15 Apk, TJ=125°C (per leg) TJ The 30CPQ... center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability CASE STYLE AND DIMENSIONS Conforms to JEDEC Outline TO-247AC (TO-3P) Dimensions in millimeters and inches www.irf.com 1 30CPQ080, 30CPQ100 PD-2.333 rev. A 12/97 Voltage Ratings Part number VR 30CPQ080 30CPQ100 80 100 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 30CPQ... Units IF(AV) Max. Average Forward Current 30 A Conditions 50% duty cycle @ TC = 140°C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 920 Surge Current (Per Leg) * See Fig. 7 240 EAS Non-Repetitive Avalanche Energy (Per Leg) 7.50 mJ IAR Repetitive Avalanche Current (Per Leg) 0.50 A A Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5µs Sine or 3µs Rect. pulse TJ = 25 °C, I AS = 0.50 Amps, L = 60 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. V A = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 30CPQ... Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Conditions 0.86 1.05 0.67 V V V @ 15A @ 30A @ 15A 0.81 V @ 30A 0.55 mA TJ = 25 °C 7 mA TJ = 125 °C (1) T J = 25 °C TJ = 125 °C VR = rated VR CT Max. Junction Capacitance (Per Leg) 500 pF VR = 5VDC , (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 7.5 nH Measured lead to lead 5mm from package body 10,000 V/ µs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 30CPQ... Units TJ Max. Junction Temperature Range -55 to 175 Tstg Max. Storage Temperature Range -55 to 175 Conditions °C °C RthJC Max. Thermal Resistance Junction to Case (Per Leg) 2.20 °C/W DCoperation RthJC Max. Thermal Resistance Junction to Case (Per Package) 1.10 °C/W DCoperation RthCS Typical Thermal Resistance, Case to Heatsink 0.24 °C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque Case Style 2 6 (0.21) Min. 6 (5) Max. 12 (10) * See Fig. 4 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) TO-247AC(TO-3P) JEDEC www.irf.com 30CPQ080, 30CPQ100 PD-2.333 rev. A 12/97 100 1000 ReverseCurrent - I (mA) R T =175°C J 150°C 125°C 1 100°C .1 75°C 50°C .01 25°C .001 .0001 0 10 20 40 100 T =125°C J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 1 .5 80 T =175°C J T = 25°C J .1 0 60 ReverseVoltage- VR(V) JunctionCapacitance- C (pF) T Instantaneous ForwardCurrent - I (A) F 100 10 1 1.5 2 T =25°C J 100 0 2.5 20 ForwardVoltage Drop- V (V) FM 40 60 80 100 Reverse Voltage- VR(V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (PerLeg) Thermal Impedance -Z (°C/W) thJC 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 P DM t 1 t 2 D=0.08 .01 .001 .00001 Notes: 1. Duty factor D= t / t 1 2 Single Pulse (Thermal Resistance) .0001 .001 .01 2. PeakT =P x Z +T J DM thJC C .1 1 10 100 t1, Rectangular PulseDuration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 30CPQ080, 30CPQ100 PD-2.333 rev. A 12/97 14 RthJC(DC) =2.20°C/W 175 AveragePowerLoss- (W atts) AllowableCaseTem perature- (°C) 180 170 165 DC 160 155 150 145 0 2 4 6 8 10 12 14 16 18 20 22 D=0.08 12 D=0.17 D=0.25 D=0.33 10 D=0.50 8 6 RMSLimit DC 4 2 0 0 2 4 6 8 10 12 14 16 18 20 22 Average ForwardCurrent - I (A) F(AV) AverageForwardCurrent -IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (PerLeg) Non-Repetitive Surge Current - I FSM (A) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com