Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 3A GENERAL PURPOSE PLASTIC RECTIFIER 1N5400 THRU 1N5408 FEATURES z LOW COST z UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOUND z DIFFUSED JUNCTION z HIGH SURGE CURRENT CAPABILITY 1.0(25.4) MIN .052(1.3) .048(1.2) .375(9.5) .335(8.5) MECHANICAL DATA z CASE: TRANSFER MOLDED, DO201AD, DIMENSIONS IN INCHES AND (MILLIMETERS) z LEADS: SOLDERABLE PER MIL-STD-202, METHOD 208 z POLARITY: CATHODE INDICATED BY COLOR BAND z WEIGHT: 1.2 GRAMS .220(5.6) .197(5.0) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT .375〞(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) SYMBOL 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 3.0 A IFSM 200 A CJ 30 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 20 ℃/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 125 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 UNITS MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.2 V MAXIMUM REVERSE CURRENT AT 25℃ IR 5 μA MAXIMUM REVERSE CURRENT AT100℃ IR 50 μA NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 63.5x63.5x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 1N5400 THRU 1N5408 Page: 1 RATINGS AND CHARACTERISTIC CURVE 1N5400 THRU 1N5408 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 5cm 2 10 INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 3 With 63.5mm□ x 1.0 CU 1 NO HEAT SINK 0 0 20 40 60 80 100 120 140 160 180 200 4 2 TJ=25℃ Pulse Width=300us 1% Duty Cycle 1.0 .4 .2 .1 .04 .02 .01 AMBIENT TEMPERATURE, (℃) .6 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (UA) 250 8.3ms Single Half Sine-Wave (JEDEC Method) 200 150 100 50 1 2 4 6 8 10 20 10 1.0 TJ=25℃ .1 .01 0 20 40 60 80 100 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 -TYPICAL JUNCTION CAPACITANCE 200 100 60 40 20 10 6 4 TJ=25℃ 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, (V) 1N5400 THRU 1N5408 120 40 60 80100 NUMBER OF CYCLES AT 60HZ JUNCTION CAPACITANCE, (PF) PEAK FORWARD SURGE CURRENT, (A) 300 Page: 2