Bulletin PD-20818 11/05 30CPQ080G 30CPQ090G 30CPQ100G SCHOTTKY RECTIFIER 30 Amp IF(AV) = 30Amp VR = 80 to 100V Major Ratings and Characteristics Description/ Features Characteristics Values Units IF(AV) Rectangular 30 A 80 to 100 V IFSM @ tp = 5 µs sine 920 A VF 0.67 V - 55 to 175 °C waveform VRRM @ 15 Apk, TJ=125°C (per leg) TJ The 30CPQ...G center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles 30CPQ...G Base Common Cathode 2 1 Anode 1 3 2 Anode 2 Common Cathode TO-247AC www.irf.com 1 30CPQ080G, 30CPQ090G, 30CPQ100G Bulletin PD-20818 11/05 Voltage Ratings Part number VR 30CPQ080G Max. DC Reverse Voltage (V) 30CPQ090G 80 VRWM Max. Working Peak Reverse Voltage (V) 30CPQ100G 90 100 Absolute Maximum Ratings Parameters 30CPQ... Units IF(AV) Max. Average Forward Current 30 A Conditions 50% duty cycle @ TC = 140°C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 920 Surge Current (Per Leg) * See Fig. 7 240 EAS Non-Repetitive Avalanche Energy (Per Leg) 7.50 mJ IAR Repetitive Avalanche Current (Per Leg) 0.50 A A Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5µs Sine or 3µs Rect. pulse TJ = 25 °C, IAS = 0.50 Amps, L = 60mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 30CPQ... Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Conditions 0.86 1.05 0.67 V V V @ 15A @ 30A @ 15A 0.81 V @ 30A 0.28 mA TJ = 25 °C 7 mA TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = rated VR CT Max. Junction Capacitance (Per Leg) 500 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 7.5 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR) (1) Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 30CPQ... Units TJ Max. Junction Temperature Range -55 to 175 Tstg Max. Storage Temperature Range -55 to 175 Conditions °C °C RthJC Max. Thermal Resistance Junction to Case (Per Leg) 2.20 °C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 1.10 °C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.24 °C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque 6 (0.21) Min. Max. Case Style Device Marking 2 6 (5) 12 (10) * See Fig. 4 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) TO-247AC(TO-3P) JEDEC 30CPQ100G www.irf.com 30CPQ080G, 30CPQ090G, 30CPQ100G Bulletin PD-20818 11/05 100 ReverseCurrent - I (mA) R 1000 150°C 10 125°C 1 100°C .1 75°C 50°C .01 25°C .001 .0001 0 40 1 1 1.5 100 1000 T = 25°C J .5 80 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) T =125°C J .1 0 60 ReverseVoltage- VR(V) T =175°C J 10 20 JunctionCapacitance- C (pF) T InstantaneousForwardCurrent - I (A) F 100 T =175°C J 2 T =25°C J 100 0 2.5 20 ForwardVoltageDrop- V (V) FM 40 60 80 100 ReverseVoltage- VR(V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Thermal Impedance- ZthJC (°C/W ) 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 P DM t 1 t2 D=0.08 .01 .001 .00001 Notes: 1. Dutyfactor D= t / t 1 2 SinglePulse (Thermal Resistance) .0001 .001 .01 2. PeakT =P xZ +T J DM thJC C .1 1 10 100 t1, Rectangular PulseDuration(Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 30CPQ080G, 30CPQ090G, 30CPQ100G Bulletin PD-20818 11/05 14 RthJC (DC) =2.20°C/W 175 AveragePower Loss- (Watts) AllowableCaseTemperature- (°C) 180 170 165 DC 160 155 150 145 0 2 4 6 8 10 12 14 16 18 20 22 D=0.08 12 D=0.17 D=0.25 D=0.33 10 D=0.50 8 DC 6 RMSLimit 4 2 0 0 2 4 6 8 10 12 14 16 18 20 22 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Non-Repetitive Surge Current - I FSM (A) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 30CPQ080G, 30CPQ090G, 30CPQ100G Bulletin PD-20818 11/05 Outline Table 15 .90 ( 0 .626 ) 3. 65 (0 .14 4) 3. 55 (0 .13 9) DIA. 5. 30 (0 .20 9) 15 .30 ( 0 .602 ) 4.70 ( 0.185) 2.5 ( 0.098) Base Common Cathode 1.5 ( 0.059) 5. 70 (0 .22 5) 2 5.30 ( 0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 2 (2 PLCS.) 3 1 Anode 1 Anode 2 Common Cathode 14. 80 ( 0.583) 14 .20 ( 0 .559 ) 3 2 4. 30 (0 .17 0) 3. 70 (0 .14 5) 2. 20 (0 .08 7) 1. 40 (0 .05 6) 2. 40 (0 .09 5) M AX . M AX. 1. 00 (0 .03 9) 0.80 ( 0.032) 0. 40 (0 .21 3) 10. 94 ( 0.430) 10 .86 ( 0 .427 ) Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Marking Information THIS IS A 30CPQ100G WITH LOT CODE 58 07 ASSEMBLED ON WW 35, 2000 IN THE ASSEMBLY LINE "H" www.irf.com INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE 30CPQ100G 035H 58 07 DATE CODE YEAR 0 = 2000 WEEK 35 LINE H 5 30CPQ080G, 30CPQ090G, 30CPQ100G Bulletin PD-20818 11/05 Ordering Information Table Device Code 30 C P Q 100 G - 1 2 3 4 5 6 7 1 - 2 - Current Rating (30 = 30A) Circuit Configuration C = Common Cathode 3 - Package 4 - Schottky "Q" Series 080 = 80V 5 - Voltage Code 090 = 90V 6 - G = Schottky Generation 100 = 100V 7 - y none = Standard Production P = TO-247 y PbF = Lead-Free Tube Standard Pack Quantity : 25 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/05 6 www.irf.com