Data Sheet No. PD94141 IRU1117-25 800mA LOW DROPOUT POSITIVE FIXED 2.5V REGULATOR DESCRIPTION FEATURES Guaranteed < 1.2V Dropout at 800mALoad Current Fast Transient Response 1% Voltage Reference Initial Accuracy Built-In Thermal Shutdown Available in SOT-223, D-Pak, Ultra Thin-Pak TM and 8-Pin SOIC Surface-Mount Packages The IRU1117-25 is a low dropout three-terminal fixed output regulator with minimum of 800mA output current capability. This product is specifically designed to provide well regulated supply for low voltage IC applications as well as generating clock supply for PC applications. The IRU1117-25 is guaranteed to have <1.2V dropout at full load current making it ideal to provide well regulated with 3.8V input supply. The IRU1117-25 is specifically designed to be stable with low cost aluminum capacitors while maintaining stability with low ESR tantalum caps. APPLICATIONS Low Voltage IC Supply Applications PC Clock Supply Voltage TYPICAL APPLICATION 5V C1 10uF VI N 3 IRU1117-25 VO U T 2 2.5V / 800mA C2 10uF Gnd 1 Figure 1 - Typical application of IRU1117-25 in a 5V to 2.5V regulator. PACKAGE ORDER INFORMATION TJ (°C) 0 To 150 Rev. 1.5 02/04/03 2-PIN PLASTIC TO-252 (D-Pak) IRU1117-25CD 2-PIN PLASTIC Ultra Thin-PakTM (P) IRU1117-25CP www.irf.com 8-PIN PLASTIC SOIC (S) IRU1117-25CS 3-PIN PLASTIC SOT-223 (Y) IRU1117-25CY 1 IRU1117-25 ABSOLUTE MAXIMUM RATINGS Input Voltage (V IN) .................................................... Power Dissipation ..................................................... Storage Temperature Range ...................................... Operating Junction Temperature Range ..................... 7V Internally Limited -65°C To 150°C 0°C To 150°C PACKAGE INFORMATION 2-PIN PLASTIC TO-252 (D-Pak) 3 2-PIN ULTRA THIN-PAKTM (P) 3 VIN 8-PIN PLASTIC SOIC (S) VIN VIN 1 8 VOUT NC 2 7 VOUT NC 3 6 VOUT Gnd 4 5 VOUT Tab is VOUT Tab is VOUT 1 1 Gnd θJA=70°C/W for 0.5" Sq pad Gnd θJA=70°C/W for 0.5" Sq pad 3-PIN PLASTIC SOT-223 (Y) Tab is VOUT θJA=55°C/W for 1" Sq pad 3 VIN 2 VOUT 1 Gnd θJA=90°C/W for 0.4" Sq pad ELECTRICAL SPECIFICATIONS Unless otherwise specified, these specifications apply over CIN=1mF, VIN=5V, COUT=10mF, and TJ=0 to 1258C. Typical values refer to TJ=258C. PARAMETER Output Voltage Line Regulation Load Regulation (Note 1) Dropout Voltage (Note 2) Current Limit Thermal Regulation Ripple Rejection Temperature Stability Long Term Stability RMS Output Noise SYM VO TEST CONDITION Io=10mA, TJ=258C Io=10mA Io=10mA, 4.75V<VIN<7V 10mA<Io<800mA Io=1A Io=800mA DVo=100mV 30ms Pulse, Io=800mA f=120Hz, Co=25mF Tantalum, Io=0.5A Io=10mA TJ=1258C, 1000Hrs TJ=258C, 10Hz<f<10KHz MIN 2.475 2.450 TYP 2.500 2.500 1.2 1.1 MAX 2.525 2.550 7 17 1.3 1.2 0.01 0.02 1.1 70 0.5 0.3 0.003 1 UNITS V mV mV V A %/W dB % % %VO Note 1: Low duty cycle pulse testing with Kelvin connections is required in order to maintain accurate data. Note 2: Dropout voltage is defined as the minimum differential voltage between VIN and VOUT required to maintain regulation at VOUT. It is measured when the output voltage drops 1% below its nominal value. 2 www.irf.com Rev. 1.5 02/04/03 IRU1117-25 PIN DESCRIPTIONS PIN# 1 PIN SYMBOL Gnd PIN DESCRIPTION 2 VOUT The output of the regulator. This pin is also connected to the tab of the package. An output capacitor must be connected to this pin to insure stability of the regulator. 3 VIN Input pin of the regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than V OUT in order for the device to regulate properly. Ground pin. This pin must be connected to ground plane using a low inductance short connection. BLOCK DIAGRAM VIN 3 2 VOUT + 1.25V + CURRENT LIMIT THERMAL SHUTDOWN 1 Gnd Figure 2 - Simplified block diagram of the IRU1117-25. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information Data and specifications subject to change without notice. 02/01 Rev. 1.5 02/04/03 www.irf.com 3 IRU1117-25 (D) TO-252 Package 2-Pin K A C B L M 78 458 D J N E O P Q R G F S H R1 SYMBOL MIN MAX A 6.477 6.731 B 5.004 5.207 C 0.686 0.838 D 7.417 8.179 E 9.703 10.084 F 0.635 0.889 2.286 BSC G H 4.521 4.623 J &1.52 &1.62 K 2.184 2.388 L 0.762 0.864 M 1.016 1.118 N 5.969 6.223 O 1.016 1.118 P 0 0.102 Q 0.534 0.686 R R0.31 TYP R1 R0.51 TYP S 0.428 0.588 C L NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS. 4 www.irf.com Rev. 1.5 02/04/03 IRU1117-25 (P) Ultra Thin-PakTM 2-Pin A A1 E U K V B H M L P G D G1 N C R C L SYMBOL A A1 B C D E G G1 H K L M N P R U V MIN MAX 5.91 6.17 5.54 5.79 6.02 6.27 1.70 2.03 0.63 0.79 0.17 0.33 2.16 2.41 4.45 4.70 9.42 9.68 0.76 1.27 0.02 0.13 0.89 1.14 0.25 0.25 0.94 1.19 28 68 2.92 3.30 5.08 NOM NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS. Rev. 1.5 02/04/03 www.irf.com 5 IRU1117-25 (S) SOIC Package 8-Pin Surface Mount, Narrow Body H A B C E DETAIL-A PIN NO. 1 L D DETAIL-A 0.386 0.015 x 458 T K I F J G 8-PIN SYMBOL A B C D E F G H I J K L T MIN MAX 4.80 4.98 1.27 BSC 0.53 REF 0.36 0.46 3.81 3.99 1.52 1.72 0.10 0.25 78 BSC 0.19 0.25 5.80 6.20 08 88 0.41 1.27 1.37 1.57 NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS. 6 www.irf.com Rev. 1.5 02/04/03 IRU1117-25 (Y) SOT-223 Package 3-Pin SYMBOL A A1 B B1 C D E e e1 H Q Q1 Q2 S T D B E e H S MIN 1.498 0.02 2.895 0.637 0.239 6.299 3.30 2.209 4.496 6.70 08 78 78 0.838 1.092 MAX 1.702 0.11 3.15 0.85 0.381 6.706 3.708 2.953 4.699 7.30 108 168 168 1.05 1.30 NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS. e1 Q1 T B1 Rev. 1.5 02/04/03 A Q C A1 Q2 www.irf.com 7 IRU1117-25 PACKAGE SHIPMENT METHOD PKG DESIG PACKAGE DESCRIPTION PIN COUNT PARTS PER TUBE PARTS PER REEL T&R Orientation D TO-252, (D-Pak) 2 75 2500 Fig A P Ultra Thin-Pak TM 2 75 2500 Fig B S SOIC, Narrow Body 8 95 2500 Fig C Y SOT-223 3 80 2500 Fig D 1 1 1 1 Feed Direction Figure A 1 1 1 1 Feed Direction Figure B 1 1 1 1 Feed Direction Figure D Feed Direction Figure C IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information Data and specifications subject to change without notice. 02/01 8 www.irf.com Rev. 1.5 02/04/03