AC Voltage Sensor HARTMAN Aerospace Power Products Features: • 2PDT Main Contacts • Hermetically Sealed • Three Phase Voltage Sensor • 440 VAC, 400 Hz, 3Ø Operation • 10 Amps • High Reliability • Meets many requirements of MIL-R-6106 E-312A-I 2PDT, 10 Amps, 440 VAC CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Input Voltage Trip Voltage Reset Voltage Time Delay 5V Above Trip Time Delay at 500 VAC Contacts 440, 400 Hz 480 ±2% VAC (3 Ø Average) at 25°C 0 Volts Input 0.5 to 1.5 Second .6 ±.15 Second 2PDT, Hermetically Sealed 10 Amps Resistive at 28 VDC 10 Amps Resistive at 115 VAC 0.1 Amp Inductive at 115 VDC with Transient of 0.75 Amp for 60 M Second 0°C to 65°C 15 Oz. Temperature Weight Notes: For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967