Photoelectric sensors FZAM 08 Diffuse sensors with intensity difference sample drawing 72 55 M8 x 0,75 SW 11 LED M8 x 1 general data sample picture type intensity difference light source pulsed infrared diode alignment / soiled lens indicator flashing light indicator light indicator LED red sensitivity adjustment no wave length 880 nm suppression of reciprocal influence yes electrical data response time / release time < 1 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 42 mA current consumption typ. 20 mA voltage drop Vd < 2 VDC output circuit PNP output current < 100 mA short circuit protection yes reverse polarity protection yes mechanical data width / diameter 8 mm type cylindrical threaded housing material brass nickel plated front (optics) PC ambient conditions operating temperature -25 ... +65 °C protection class IP 65 1 www.baumer.com 2/6/2015 Photoelectric sensors FZAM 08 Diffuse sensors with intensity difference order reference sensing distance Tw height / length connection types output function FZAM 08P1001 < 40 mm 56 mm cable 3 pin, 2 m light operate FZAM 08P1001/S35L < 40 mm 73 mm connector M8, 3 pin light operate FZAM 08P1002 < 80 mm 56 mm cable 3 pin, 2 m light operate FZAM 08P1002/S35L < 80 mm 73 mm connector M8, 3 pin light operate FZAM 08P3001 < 40 mm 56 mm cable 3 pin, 2 m dark operate FZAM 08P3001/S35L < 40 mm 73 mm connector M8, 3 pin dark operate FZAM 08P3002 < 80 mm 56 mm cable 3 pin, 2 m dark operate FZAM 08P3002/S35L < 80 mm 73 mm connector M8, 3 pin dark operate 2 www.baumer.com 2/6/2015