Evaluation Board User Guide UG-289 One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com RedyKit for the ADP150 LDO FEATURES TYPICAL APPLICATION CIRCUITS ADP150 ultralow noise voltage regulator All-voltage options included for evaluation Surface-mount ADP150 parts that can be easily soldered Additional parts for prototyping VIN 2 GND 3 EN VOUT 5 VOUT = 1.8V COUT 1µF ON ADP150UJZ-REDYKIT CONTENTS NC 4 NC = NO CONNECT. DO NOT CONNECT TO THIS PIN. 1 ADP150UJ-3.3-EVALZ evaluation board, VOUT = 3.3 V 1 ADP150UJ-1.8-EVALZ evaluation board, VOUT = 1.8 V 5 additional ADP150 voltage options in a labeled bag 09908-002 OFF Figure 1. ADP150UJZ-RedyKit GENERAL DESCRIPTION The ADP150UJZ-RedyKit RedyKit™ allows simplified prototyping and evaluation and is available for every standard fixed output voltage option in the ADP150 product family. The RedyKit allows the user to evaluate all voltage options with one easy-to-order kit. All surface-mount ADP150 parts are sorted and stored in the kit with the Analog Devices, Inc., part number and fixed output voltage clearly printed on each zip-top bag (see Figure 2). The ADP150UJZ-RedyKit comes with fixed 1.8 V and 3.3 V evaluation boards. The kit also contains additional parts for prototyping. The kit, which contains individually packaged parts and the two evaluation boards, is packaged in an ESD foam pad inside a treated cardboard box that measures 8.7" (L) × 7.9" (W) × 1.75" (H), that is, 22 cm (L) × 20 cm (W) × 4.5 cm (H). For additional information, also see the ADP150 evaluation board user guide, UG-054. The kit can be used in the engineering lab to evaluate required voltage options. When other voltage options need to be evaluated, a different part from the kit can be easily soldered onto one of the evaluation boards supplied with the kit. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. 1 Rev. 0 | Page 1 of 8 UG-289 Evaluation Board User Guide TABLE OF CONTENTS Features .............................................................................................. 1 RedyKit Packages...............................................................................3 ADP150UJZ-RedyKit Contents...................................................... 1 Evaluation Board Schematic and Artwork.....................................4 General Description ......................................................................... 1 Ordering Information .......................................................................5 Typical Application Circuits............................................................ 1 RedyKit Bill of Materials (BOM) ................................................5 Revision History ............................................................................... 2 REVISION HISTORY 6/11—Revision 0: Initial Version Rev. 0 | Page 2 of 8 Evaluation Board User Guide UG-289 09908-102 REDYKIT PACKAGES Figure 2. ADP150UJZ-RedyKit Package Rev. 0 | Page 3 of 8 UG-289 Evaluation Board User Guide EVALUATION BOARD SCHEMATIC AND ARTWORK VIN 1 VIN 2 GND 3 EN VOUT VOUT 5 U1 C1 C2 J1 NC = NO CONNECT. DO NOT CONNECT TO THIS PIN. 09908-003 NC 4 Figure 3. ADP150UJZ-RedyKit Evaluation Board Schematic GND GND ADP150 - _____________ - EVALZ VIN VOUT U1 C2C1 C3C4 J1 GND 09908-004 GND EN Figure 4. ADP150UJZ-RedyKit Evaluation Board Layout Rev. 0 | Page 4 of 8 Evaluation Board User Guide UG-289 ORDERING INFORMATION REDYKIT BILL OF MATERIALS (BOM) Table 1. ADP150UJZ-RedyKit BOM Qty. 1 1 3 3 3 3 3 Model ADP150UJ-3.3-EVALZ ADP150UJ-1.8-EVALZ ADP150AUJZ-1.8-R7 ADP150AUJZ-2.5-R7 ADP150AUJZ-2.8-R7 ADP150AUJZ-3.0-R7 ADP150AUJZ-3.3-R7 Output Voltage (VOUT) 3.3 V 1.8 V 1.8 V 2.5 V 2.8 V 3.0 V 3.3 V Rev. 0 | Page 5 of 8 Maximum Current 150 mA 150 mA 150 mA 150 mA 150 mA 150 mA 150 mA Description Evaluation board Evaluation board 5-lead TSOT 5-lead TSOT 5-lead TSOT 5-lead TSOT 5-lead TSOT UG-289 Evaluation Board User Guide NOTES Rev. 0 | Page 6 of 8 Evaluation Board User Guide UG-289 NOTES Rev. 0 | Page 7 of 8 UG-289 Evaluation Board User Guide NOTES ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. ©2011 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG09908-0-6/11(0) Rev. 0 | Page 8 of 8