Product Overview NCV7513B: MOSFET Pre-Driver, Hex, Low-Side For complete documentation, see the data sheet Product Description The NCV7513B programmable six channel low-side MOSFET pre-driver is one of a family of FLEXMOS™ automotive grade products for driving logic-level MOSFETs. The product is controllable by a combination of serial SPI and parallel inputs. It features programmable fault management modes and allows power-limiting PWM operation with programmable refresh time. The device offers 3.3 V/5.0 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5.0 V. Power-on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled. Each channel independently monitors its external MOSFET's drain voltage for fault conditions. Shorted load fault detection thresholds are fully programmable using an externally programmed reference voltage and a combination of four discrete internal ratio values. The ratio values are SPI selectable and allow different detection thresholds for each group of three output channels. Fault information for each channel is 2-bit encoded by fault type and is available through SPI communication. Fault recovery operation for each channel is programmable and may be selected for latch-off or automatic retry. The FLEXMOS family of products offers application scalability through choice of external MOSFETs. Features Benefits • • • • • 16-bit SPI with Frame Error Detection 3.3 V / 5 V Compatible I/O Two Enable Inputs Open-drain Fault and Status Flags Programmable Shorted Load Fault Detection Thresholds Fault Recovery Mode Fault Retry Timer Flag Masking • Load Diagnostics with Latched Unique Fault Type Data Shorted Load Open Load Short to GND • AEC Qualified • PPAP Capable Applications • • • • • Invalid Frame Rejection Interfaces with Most Automotive Microcontrollers Adapts Supervisory Microcontroller Immediate Fault Notification Allows Scalability to MOSFET • Pinpoints System Faults End Products • Body and Power Train • Automotive Part Electrical Specifications Product Compliance Status Type Number of Drivers NCV7513BFTR2G AEC Qualified Active MOSFET or IGBT 6 PPAP Capable Pb-free Halide free Vin Max (V) VCC Max (V) Drive Source/Si nk Typ (mA) Rise Time (ns) Fall Time (ns) tp Max (ns) Package Type 5.25 1 1400 1400 1000 LQFP-32 Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016