Download

Plan the beginning ...
... anticipate the end.
STAINLESS STEEL ENCLOSURES
1
About us
The ROSE Systemtechnik GmbH is a
company in the Phoenix Mecano AG
Switzerland group, are a a complete
supplier of enclosure systems and meet
the highest demands of quality. Extensive services such as finishing, tooling and
testing of enclosure systems round off
our range of services.
Our products are mostly put to use
in industrial surroundings and
therefore have to withstand the
toughest conditions. Sales of our
enclosure systems takes place
worldwide, and our own branch offices
provide optimum support for our
customers in important markets.
Our extensive product programme is
completed with a wide range of
electronic components, which we can
offer you, for your individual applications,
all from the same supplier.
A little company philosophy
In our founding year 1969 a guiding
principle, still very much in use today, was
in the foreground even then: whatever is
thought up today can be obsolete
tomorrow.
Faithful to this motto, we develop
products which are significantly in
advance of the technological state of the
art, and which take up a leading position
in the market. To know today what will
be important tomorrow - this is an absolute necessity for a successful company.
For this reason we at ROSE consider
the highest in specialist expertise and
readiness to provide innovation to be the
most important factor in success, in
addition to rigorous implementation of
customer requirements - both today and
tomorrow.
Our motto "Well thought out from
beginning to end“ is so much more than
just a succinct advertising slogan, it
represents our whole company
philosophy in just one sentence.
You are our number 1!
You, our customers, are our reason
for existence. We are aware of this fact to
the fullest possible extent. For this reason
we make great efforts, permanently and
continuously, to fulfill your requirements
in as perfect a way as possible. With a
wide range of products, continuous
innovation, the largest service range in
the industry by a long way, accessories,
and much more.
2
Challenge us!
We're looking forward to your assignment.
International presence
We are also glad to be of service
internationally. Wherever we can help you
with solutions "in all aspects of
enclosures", we are just around the
corner. Support for our international
customers takes place directly or via our
own branches (Phoenix Mecano) or
agencies in all important industrial
markets. We consider ourselves to be your
reliable and expert partners– worldwide!
Everything from the same supplier
As a leading manufacturer of enclosure systems and a service provider with a
complete range "in all aspects of enclosures", we can offer you so much more
than just standards out of a catalogue. Based on our extremely wide product range
of enclosures for many various applications, we are capable of offering you individual
products or completely finished, equipped or tested systems to your requirements.
The choice is yours!
Quality and service – but of course
We are continuously striving to
improve our service and to widen our
range of services. The foundation for this
solution-orientated way of thinking is
provided by our outstandingly trained
and highly-motivated staff. Our
continuous and clearly structured further training programs ensure that we are
permanently able to offer you better
service. Our aim is to give you the best
performance every day – for your benefit!
By the way: We are certified to ISO
9001. Of course.
You can find us on the internet...
... at www.rose-pw.de. We will do our best to provide you with continuous and
up-to-date information about innovations, new products, trade fair dates, products
and applications and much more. Have a look around our website, we're looking
forward to seeing you there.
3
4
Contents
Stainless steel industrial enclosures
Page 7 - 8
• Universal standard enclosure for hygienic areas
Stainless steel industrial enclosures with hinge IGS
Page 9 - 10
• Universal enclosure with covered hinge
Stainless steel switch gear cabinets KSS
Page 11 - 12
• Switch gear cabinet with hinged door
Ex stainless steel enclosures
Page 13 - 14
• Terminal enclosure for increased safety and intrinsic safety
Ex stainless steel flange enclosures
Page 15 - 16
• Terminal- / empty enclosure with 1 or 4 flanges
Ex stainless steel enclosures with hinge Ex-IGS
Page 17 - 18
• Empty enclosure with EC-type examination certificate for individual installations
• Stainless steel enclosure fitted with terminals for increased safeguards and increased safety
Commander KSSC
Page 19 - 20
• Stainless steel control enclosure
Commander 400
Page 21 - 22
• High-quality stainless steel control enclosure for hygienic areas
GTH 48 / GTH 60 suspension systems
Page 23 - 28
• Stainless steel round tube system with system components for hygienic applications
Stainless steel CleanTouch keyboard
Page 29 - 30
• Keyboard for all hygienic areas
Stainless steel cable glands
Page 31
• Ex-, PG- and metric versions
• Pressure balance element, drain plug
Stainless steel special version
Page 32 - 33
• Individual enclosure systems customized
5
Stainless steel enclosure systems
Stainless steel is an increasingly
important material in many
application areas. In comparison with
other enclosure materials, stainless
steel is characterised by individual
finishing options, robustness, high
quality surface and much more.
It is typically used in the
• food industries
• packaging industries
• areas with harsh or aggressive
environments
• areas subject to EMC
• all hygienic technical areas
ROSE stainless steel enclosure
systems are manufactured in
materials 1.4404 and 1.4301 as
standard. These stainless steel
qualities offer permanent resistance
both in harsh environments of the
chemical industry and are also easy to
clean and ideal for use in food
preparation environments. ROSE
stainless steel products are supplied
with a permanent high-quality
surface finish (grinding, grain 240),
and build (precise edges and welding)
as standard and comply with
enclosure ratings IP 65 and IP 66 as
standard (optionally higher).
Stainless steel industrial enclosures
- 27 enclosure variants with removable lid or hinged door, dimensions from
100 x 100 x 61 mm up to 600 x 380 x 217 mm
- Applications: food- and packaging industries and harsh environments
Stainless steel switch gear cabinets KSS
- 7 enclosure variants with door and mounting plate, dimensions from 200 x 300 x 155 mm
up to 600 x 760 x 210 mm
- Applications: food- and packaging industries and harsh environments
Ex stainless steel enclosures
- 34 enclosure variants with and without flange in sizes from 100 x 100 x 61 mm
to 980 x 740 x 217 mm
- Certificates: ATEX, IECEx, GOST-R, GOST-K, INMETRO
Commander KSSC
- 7 enclosure variants with door, dimensions from 200 x 300 x 155 mm up to 600 x 760 x 210 mm
- Applications: operating enclosures in the food- and packaging industries
Commander 400
- 7 standard size variants dimensions from 387 x 247 x 162 mm up to 737 x 447 x 362 mm
- Applications: operating enclosures in the food- and packaging industries
GTH 48 / GTH 60 Suspension systems
- Stainless steel suspension system, round design, for best requirements
- Applications: hygienic areas, measuring and automation systems and controller constructions
Stainless steel CleanTouch keyboard
- Keyboard for all hygienic areas
Stainless steel cable glands
- Metric and PG cable glands in standard or Ex-version
- Pressure balance element
Stainless steel special enclosures
- Specified enclosure systems customized
- Special sizes from 25 off
6
Stainless steel industrial enclosures
UL® / cUL®
•
•
•
•
•
Universal industrial enclosures for hygienic areas
High quality surface 1.4301
No gaps between lid/base
Enclosure rating up to IP 69K (on request)
Optional individual sizes and versions from 25 off (see p. 32/33)
Technical data
Material:
stainless steel 1.25 mm or 1.5 mm; 1.4301 / 304
other materials on request
Ingress protection:
IP 66 to EN 60529
high pressure cleaner-resistant version (IP 69K) on
request
Seal:
VMQ (silicone)
EMC on request
Surface:
Included in delivery:
grinded, grain 240
Enclosure base with bracket clips and
threaded hole for attachment of DIN rails,
4 mounting bosses with attachment holes
and sealing plugs, alternatively available
without fastening holes, lid with stud bolts
inside and permanently attached lid screws.
other surface on request
Temperature range:
-40°C to +80°C
other temperature ranges on request
7
Stainless steel industrial enclosures
Programme range
Order number
Dimensions (mm)
Enclosure with
Enclosure with
Mounting
mounting bosses
mounting bosses
plates
and holes
without holes
A
B
C
D
E
F
I
K
S
M
X
Hbase
Htot
HD
37.10 10 06
37.10 10 96
10.01 10 53
100
100
60
84
81
60
20
11,25
1,25
-
M4
46
61
15
37.15 10 06
37.15 10 96
10.01 10 54
150
100
110
84
131
60
20
11,25
1,25
-
M4
46
61
15
37.15 15 08
37.15 15 98
10.01 10 38
150
150
110
134
131
110
70
14,25
1,25
-
M6
63
81
18
10.01 10 55
200
100
160
84
181
60
20
11,25
1,25
-
M4
46
61
15
10.01 10 40
200
200
160
184
181
160
120
14,25
1,25
-
M6
63
81
18
18
37.20 10 06
37.20 20 08
37.20 20 98
37.20 20 12
37.20 20 92
10.01 10 40
200
200
160
184
181
160
120
14,25
1,25
-
M6
103
121
37.30 15 08
10.01 10 39
300
150
260
134
281
110
70
14,25
1,25
-
M6
63
81
18
37.30 20 08
10.01 10 41
300
200
260
184
281
160
120
14,25
1,25
-
M6
63
81
18
37.30 20 12
10.01 10 41
300
200
260
184
281
160
120
14,25
1,25
-
M6
103
121
18
37.30 30 12
37.30 20 92
10.01 10 44
300
300
260
284
281
260
220
14,25
1,25
-
M6
103
121
18
37.30 30 16
10.01 10 44
300
300
260
284
281
260
220
14,25
1,25
-
M6
143
161
18
37.38 38 16
10.01 10 45
380
380
340
364
361
340
300
14,25
1,25
-
M6
143
161
18
37.40 15 08
10.01 10 56
400
150
360
134
381
110
70
14,25
1,25
-
M6
63
81
18
37.40 20 12
10.01 10 43
400
200
360
184
381
160
120
14,25
1,25
-
M6
103
121
18
37.40 30 16
10.01 10 48
400
300
360
284
381
260
220
14,25
1,25
-
M6
143
161
18
37.50 30 16
10.01 10 57
500
300
460
284
481
260
220
14,25
1,25
230
M6
143
161
18
37.50 40 16
10.01 10 49
500
400
460
384
481
360
320
14,25
1,25
230
M6
143
161
18
37.60 20 12
10.01 10 58
600
200
560
184
581
160
120
14,25
1,5
280
M6
103
121
18
37.99 99 99
Special size acc. specification
Earthing bolts
M6x12
Ø 10 (for enclosures with fixing drillholes)
Countersunk screw
M5 DIN 966
H base
H tot
Base
Accessories
Mounting set (gaskets, nuts and screws)
37.99 00 01
External hinge set (2 pcs.)
37.00 00 02
External mounting bracket (4 pcs.)
37.10 50 00
External bracket for enclosure with mounting hole
for enclosure type A
C
D
37.10 10 06
130
44
60
60
37.30 30 12
330
244
260
260
37.15 10 06
180
44
110
60
37.30 30 16
330
244
260
260
37.15 15 08
180
94
110
110
37.38 38 16
410
324
340
340
37.20 10 06
230
43
160
60
37.40 15 08
430
94
360
110
37.20 20 08
230
144
160
160
37.40 20 12
430
144
360
160
37.20 20 12
230
144
160
160
37.40 30 16
430
244
360
260
37.30 15 08
330
94
260
110
37.50 30 16
530
244
460
260
37.30 20 08
330
144
260
160
37.50 40 16
530
344
460
360
37.30 20 12
330
144
260
160
37.60 20 12
630
144
560
160
8
B
C
D
for enclosure type A
B
Stainless steel industrial enclosures with hinge IGS
• Universal enclosure with covered hinge and lock
• High quality surface 1.4301
• Optional individual sizes and versions e.g. with flange opening or
window from 25 pcs.(see p. 32/33)
Technical data
Material:
stainless steel 1.25 mm or 1.5 mm; 1.4301 / 304
other materials on request
Ingress protection:
IP 66 to EN 60529
Seal:
VMQ (silicone)
EMC on request
Surface:
grinded, grain 240
other surface on request
Included in delivery:
Enclosure with hinged lid, double ward lock,
4 floor mounting bosses with fastening
holes and sealing plugs
Temperature range:
-40°C to +80°C
other temperature ranges on request
9
Stainless steel industrial enclosures with hinge IGS
Programme range
Order No.
Mounting
Dimensions (mm)
plate
A
B
C
E
F
I
G
S
Hbase
Htot
37.00 22 09
10.01 10 66
200
250
160
181
210
170
25
1.25
75
97
37.00 22 15
10.01 10 66
200
250
160
181
210
170
25
1.25
135
157
37.00 32 09
10.01 10 67
350
250
310
331
210
170
25
1.25
75
97
37.00 33 16
10.01 10 44
300
300
260
281
260
220
25
1.25
145
167
37.00 44 16
10.01 10 45
380
380
340
361
340
300
25
1.25
145
167
37.00 44 21
10.01 10 45
380
380
340
361
340
300
25
1.25
195
217
37.00 53 16
10.01 10 57
500
300
460
481
260
220
25
1.25
145
167
37.00 63 16
10.01 10 68
600
300
560
580
260
220
25
1.5
145
167
37.00 64 21
10.01 10 69
600
380
560
580
340
300
25
1.5
195
217
37.00 99 00
Special size (please state requested dimensions)
Earthing bolts
M6x12
H base
H tot
Base
Accessories
Mounting set (gaskets, nuts and screws)
37.99 00 01
External mounting bracket (4 pcs)
37.10 50 00
External brackets
for enclosure type A
B
C
D
37.00 22 09
230
194
160
210
37.00 32 09
380
194
310
210
37.00 22 15
250
194
180
210
37.00 33 16
330
244
260
260
37.00 44 16
410
324
340
340
37.00 53 16
530
244
460
260
37.00 63 16
630
244
560
260
37.00 44 21
410
324
340
340
37.00 64 21
630
324
560
340
10
Stainless steel switch gear cabinets KSS
•
•
•
•
Switch gear cabinets with hinged door
Mounting plate attachment above stud bolts / threaded weld nuts
Surface grinded all sides (240 grain)
Optional individual sizes and versions from 25 pcs (see p. 32/33)
Technical data
Material:
stainless steel 1.25 mm or 1.5 mm; 1.4301 / 304
Ingress protection:
IP 66 to EN 60529
Seal:
VMQ (silicone)
EMC on request
Surface:
grinded, grain 240
Inluded in delivery:
Enclosure with door, double ward lock,
1 x M6 threaded stud bolts in lid and
4 x M6 threaded weld nuts in base.
Temperature range:
-40°C to +80°C
other temperature ranges on request
11
Stainless steel switch gear cabinets KSS
Programme range
Order No.
Mounting
Dimensions (mm)
plate
A
B
C
S
Hb
Htot
37.01 23 15
37.01 99 01
200
300
25
1,25
133
155
37.01 34 21
37.01 99 02
300
380
25
1,25
188
210
37.01 43 15
37.01 99 03
400
300
25
1,25
133
155
37.01 46 21
37.01 99 04
380
600
25
1,5
188
210
37.01 55 21
37.01 99 05
500
500
25
1,25
188
210
37.01 64 15
37.01 99 06
600
400
25
1,5
133
155
37.01 68 21
37.01 99 07
600
760
25
1,5
188
210
37.01 99 00
Special size
Earthing mounting bolts M6x12
4x Internal threaded M6 sockets
H base
Base
12
H tot
Commander KSSC
• Stainless steel control enclosure based on switch gear cabinet KSS
• Including amplifier plate and drill hole for ROSE GTH suspension system
• Optional individual sizes and versions from 25 off (see p. 32/33)
Technical data
Material:
stainless steel 1.25 mm or 1.5 mm; 1.4301 / 304
Ingress protection:
IP 65 to EN 60529
Seal:
VMQ (silicone)
EMC on request
Surface:
Included in delivery:
grinded, grain 240
Enclosure system including amplifier plate
and GTH coupling hole with door, double
ward lock.
Temperature range:
-40°C to +80°C
13
Commander KSSC
Programme range
Order no.
Mounting plate
Dimensions (mm)
Drilling plan for
A
B
C
D
E
S
Hbase
Htot
suspension system (side A)
37.02 23 15
37.01 99 01
200
300
24,6
160
100
1.25
130,7
155
Picture 1 (GTH 48)
37.02 34 21
37.01 99 02
300
380
24,6
260
175
1.25
185,7
210
Picture 1 (GTH 48)
37.02 43 15
37.01 99 03
400
300
24,6
360
100
1.25
130,7
155
Picture 1 (GTH 48)
37.02 46 21
37.01 99 04
380
600
25,1
340
175
1.5
185,7
210
Picture 2 (GTH 60)
37.02 55 21
37.01 99 05
500
500
24,6
460
175
1.25
185,7
210
Picture 2 (GTH 60)
37.02 64 15
37.01 99 06
600
400
25,1
460
120
1.5
130,7
155
Picture 2 (GTH 60)
37.02 68 21
37.01 99 07
600
760
25,1
560
175
1.5
185,7
210
Picture 2 (GTH 60)
37.02 99 00
special size
Cutout of size, state by order
Special size: from 25 pcs/order
Earthing mounting bolts M6x12
H base
H tot
Base
Picture 1:
Coupling opening (GTH 48)
Picture 2:
Coupling opening (GTH 60)
Accessories
Handle for KSSC (see handle C400, page 21)
14
on request
Commander 400
• Stainless steel control enclosure system for hygienic areas
• High quality surface
• Integrated handle set
Technical data
Material:
enclosure body/door:
stainless steel 1.4301 (304);
wall thickness 1.5 mm
other materials on request
Ingress protection:
IP 65 to EN 60529
Seal:
VMQ (silicone)
EMC on request
Included in delivery:
Enclosure body - depending on design with
closed or individually fitted enclosure front,
door at the rear, internal mounting bracket,
handle set and coupling hole for ROSE
stainless steel GTH mounting system
Surface:
grinded, grain 240
Temperature range:
-40°C to +80°C
15
Commander 400
Programme range
Drilling plan for
Order No.
Dimensions (mm)
56.01 04 01
387
247
162
300
200
170
270
156
132
99
82
93°
87°
Picture 1 (GTH 48)
56.02 04 01
487
247
162
400
200
170
370
156
132
99
82
93°
87°
Picture 1 (GTH 48)
56.03 04 01
499
347
212
400
300
270
370
256
182
99
82
93°
87°
Picture 1 (GTH 48)
56.04 04 01
507
447
212
408
400
370
378
356
182
99
82
93°
87°
Picture 1 (GTH 48)
56.05 04 01
599
347
212
500
300
270
470
256
182
109
94
77°
103°
Picture 2 (GTH 60)
56.06 04 01
619
447
292
500
400
370
470
356
262
109
94
77°
103°
Picture 2 (GTH 60)
56.07 04 01
737
447
362
600
400
370
570
356
332
109
94
77°
103°
Picture 2 (GTH 60)
56.99 04 92*
special size
suspension system (side A)
on request
* Special size: above 25 pcs./order
Cutout of size, state by order
Enclosure height = B
Enclosure width = A
Fitting area
Door
Enclosure depth = C
Earthing bolts
M5x10
Picture 1:
Coupling opening (GTH 48)
Picture 2:
Coupling opening (GTH 60)
Accessories
Mounting angle set
16
56.00 00 05
Commander 410
•
•
Stainless steel Commander with door for standard versions
Stainless steel Commander with screwed rear panel for
hygienic areas
Technical data
Material:
stainless steel 1.4404/316L
Ingress protection:
IP 65 to EN 60529
Seal:
Included in delivery:
?????
silicone
Surface:
grinded, grain 240
Temperature range:
-40°C to +80°C
17
Commander 410
Programme range
Order No.
Version
drilling plan for
56.01 04 01
387 x 247 x 162 mm (Typ 1)
GTH 48
56.02 04 01
487 x 247 x 162 mm (Typ 2)
GTH 48
56.03 04 01
499 x 347 x 212 mm (Typ 3)
GTH 48
56.04 04 01
507 x 447 x 212 mm (Typ 4)
GTH 48
56.05 04 01
599 x 347 x 212 mm (Typ 5)
GTH 60
56.06 04 01
619 x 447 x 292 mm (Typ 6)
GTH 60
56.07 04 01
737 x 447 x 362 mm (Typ 7)
GTH 60
56.99 04 92*
special size
on request
suspension system
* Special size: above 25 pcs./order
18
19
20
GTH 48 / GTH 60 suspension systems
• Stainless steel round tube system with system components
for hygienic applications
• Tube diameter 48 and 60 mm
• Tube version S-, J- and I-shape
• Components screwed to tube
• Optional EMC version
Technical data
Material:
tube: stainless steel 1.4301
system components: stainless steel 1.4305
Ingress protection:
IP 65 to EN 60529
Free cable passage:
GTH 48: 41 mm
GTH 60: 53 mm
Surface:
Included in delivery:
System components and tube mounted if
ordered
tube: grinded, grain 240
Temperature range:
-25°C to +60°C
21
GTH 48 / GTH 60 suspension systems
Programme range
GTH 48
GTH 60
Order No.
Order No.
57.01 73 00
57.02 73 00
Coupling
57.01 73 01
57.02 73 01
EMC coupling
57.01 73 02
57.02 73 02
Coupling for external tube fitting
57.01 66 00
57.02 66 00
Top-mounted joint
57.01 66 01
57.02 66 01
EMC top-mounted joint
57.01 66 02
57.02 66 02
Top mounted joint for external tube fitting
57.01 74 00
57.02 74 00
Foot stand (hanging / standing)
57.01 72 00
57.02 72 00
Foot stand with cable outlet (hanging / standing)
57.01 76 00
57.02 76 00
Console adapter
57.01 79 00
57.02 79 00
Wall console
57.01 00 05
57.02 00 05
Tube I (500 mm)
57.01 00 10
57.02 00 10
Tube I (1000 mm)
57.01 00 15
57.02 00 15
Tube I (1500 mm)
57.01 00 99
57.02 00 99
Tube I special length
57.01 02 05
57.02 02 05
Tube S (500 mm)
57.01 02 10
57.02 02 10
Tube S (1000 mm)
57.01 02 99
57.02 02 99
Tube S special length
57.01 01 05
57.02 01 05
Tube J (500 mm)
57.01 01 07
57.02 01 07
Tube J (750 mm)
57.01 01 10
57.02 01 10
Tube J (1000 mm)
57.01 01 99
57.02 01 99
Tube J special length
57.00 99 00
57.00 99 00
System mounting
Accessories
GTH 48
GTH 60
Protective cap set (4 caps) for top-mounted joint and foot stand
57.00 99 01
57.00 99 01
Spare blind flange
57.01 99 02
57.02 99 00
Load in N
Load diagram
Extension in m
22
GTH 48 / GTH 60 suspension systems
Product description / Dimensions
Coupling
for attachment of stainless steel tubes 48 or 60 mm.
Pivot, can be locked at any point using clamping screw.
Swivel range: up to 350°, can be adjusted in 60° steps.
Included in delivery: Coupling includes mounting screws
Order No.
View A
Version
for tube
A
B
C
D
E
F
G
57.01 73 00
Standard
Ø 48
Ø 118
70
53
68
72
Ø 44
13
57.01 73 01
EMC
Ø 48
Ø 118
70
53
68
72
Ø 44
13
57.01 73 02
for external
fitting
Ø 48
Ø 118
82
65
68
72
Ø 44
13
57.02 73 00
Standard
Ø 60
Ø 130
81
64
85.8
68
Ø 53
13
57.02 73 01
EMC
Ø 60
Ø 130
81
64
85.8
68
Ø 53
13
57.02 73 02
for external
Ø 60
Ø 130
92
75
85.8
68
Ø 53
13
GTH 48
M8 Machine screw
GTH 60
fitting
Top-mounted joint
for attachment of stainless steel tube, 48 or 60 mm.
Pivot can be locked at any point using clamping screw.
Swivel range: up to 350°, can be adjusted in 60° steps.
Included in delivery: top-mounted joint without M8 cylinder head screw
Order No.
View A
Version
for tube
A
B
C
D
E
F
G
57.01 66 00
Standard
Ø 48
Ø 118
70
53
68
72
Ø 44
13
57.01 66 01
EMC
Ø 48
Ø 118
70
53
68
72
Ø 44
13
57.01 66 02
for external
GTH 48
M8 Machine screw DIN 6912
fitting
Ø 48
Ø 118
82
65
68
72
Ø 44
13
57.02 66 00
Standard
Ø 60
Ø 130
81
64
85.8
68
Ø 53
14
57.02 66 01
EMC
Ø 60
Ø 130
81
64
85.8
68
Ø 53
14
57.02 66 02
for external
Ø 60
Ø 130
92
75
85.8
68
Ø 53
14
GTH 60
fitting
Foot stand
for base- or ceiling mounting. Ceiling mounting version - additional safety bore for tube.
Included in delivery: foot stand
Order No.
Version
for tube
A
B
C
D
E
F
Foot stand (hanging / standing)
Ø 48
Ø 118
80
60
68
72
Ø 41.9
Foot stand (hanging / standing)
Ø 60
Ø 130
85
60
85.8 68
Ø 53.9
GTH 48
57.01 74 00
GTH 60
57.02 74 00
23
GTH 48 / GTH 60 suspension systems
Foot stand with cable outlet
for external cable outlet on side. Ceiling mounting version - additional safety bore for tube.
Included in delivery: foot stand with flange plate and 2 screws
Order No.
Version
for tube
A
B
C
D
E
F
G
H
Foot stand
Ø 48
Ø 118
110
60
68
72
Ø 41.9
45
38.5
Ø 130
115
60
85.8 68
Ø 53.9
70
38.5
GTH 48
57.01 72 00
(hanging / standing)
GTH 60
57.02 72 00
Foot stand
Ø 60
(hanging / standing)
For M4 DIN 7991
Spare blind flange
for foot stand with cable outlet
Material: 1.4301
Inluded in delivery: blind flange without M4 countersunk screw
Order No.
A
B
C
D
H
I
73
47.5
2.5
55
45
38.5
90
48
2.5
80
70
38.5
GTH 48
57.01 99 02
Fitting area
GTH 60
57.02 99 00
Max. number of cable glands/ blind flange:
57.01 99 02:
1 x 25 or 1 x 20 or 4 x M12
57.02 99 00:
1 x 25 or 2 x 20 or 6 x M12
Wall bracket
for adaption top mounted joint or coupling
Order No.
for tube
A
B
C
D
E
F
G
H
I
Ø 48
138
178
155
132
88
84
50
72
68
Ø 60
149
191,5
168
144
84
102
60
68
85,8
Mounting hole
GTH 48
57.01 79 00
GTH 60
57.02 79 00
View A
Console adapter
Angle of inclination 14°
Included in delivery: console adapter with 4 fastening screws
Order No.
for tube
A
B
C
D
E
F
G
Ø 48.3
Ø 118
40
10.6
68
72
Ø 79
14°
Ø 60.3
Ø 130
40
7.6
68
85.8
Ø 91
14°
GTH 48
57.01 76 00
GTH 60
57.02 76 00
24
GTH 48 / GTH 60 suspension systems
Connecting tube I
Order No.
L1 (mm)
A (outside Ø)
B (inside Ø)
Weight (kg)
GTH 48
57.01 00 05
500
48.3
41
1.8
57.01 00 10
1000
48.3
41
3.6
57.01 00 15
1500
48.3
41
5.4
57.01 00 99
special length
48.3
41
-
GTH 60
57.02 00 05
500
60.3
53
2.3
57.02 00 10
1000
60.3
53
4.5
57.02 00 15
1500
60.3
53
6.8
57.02 00 99
special length
60.3
53
-
max. length L1 = 1000 mm
Connecting tube S
Order No.
L1 (mm)
L2 (mm)
L3 (mm)
A (outside Ø)
B (inside Ø)
Weight (kg)
GTH 48
57.01 02 05
500
300
300
48.3
41
1.9
57.01 02 10
1000
300
300
48.3
41
4.5
48.3
41
-
57.01 02 99
special length
GTH 60
57.02 02 05
500
300
300
60.3
53
3.4
57.02 02 10
1000
300
300
60.3
53
5.7
60.3
53
-
57.02 02 99
special length
max. length L1 = 1000 mm
Connecting tube J
Order No.
L1 (mm)
L2 (mm)
L3 (mm)
A (outside Ø)
B (inside Ø)
Weight (kg)
57.01 01 05
500
300
300
48.3
41
1.9
57.01 01 07
750
750
300
48.3
41
6.4
57.01 01 10
1000
750
300
48.3
41
7.4
48.3
41
-
GTH 48
57.01 01 99
special length
GTH 60
57.02 01 05
500
300
300
60.3
53
3.4
57.02 01 07
750
750
300
60.3
53
8.2
57.02 01 10
1000
750
300
60.3
53
9.3
60.3
53
-
57.02 01 99
special length
max. length L1 = 1000 mm
Product info:
Individual lengths and versions on request.
25
GTH 48 / GTH 60 suspension systems
Enquiry
Order
Please copy, complete and fax: +49 (0) 571/5041-6
Company
Telephone
Contact
Fax
Address
E-Mail
GTH 48
GTH 60
suspension system, no. off
System consisting of the following components:
Components, side A
Connecting tube
Components, side B
Coupling
Coupling
EMC coupling
Coupling for external tube fitting
EMC coupling
A
B
Top-mounted joint
EMC top-mounted joint
Top-mounted joint for external tube fitting
Top-mounted joint
EMC top-mounted joint
I-tube (L1)
Top-mounted joint for external tube fitting
Foot stand
Foot stand
500 mm
Foot stand for ceiling mounting
Foot stand for ceiling mounting
1000 mm
Foot stand with cable outlet
Foot stand with cable outlet
1500 mm
Foot stand (ceiling mounting)
with cable outlet
Console adapter
Special length
mm
Wall console
B
S-tube (L1/L2/L3)
500/300/300 mm
1000/300/300 mm
Special length*
/
/
A
mm
B
J-tube (L1/L2/L3)
500/300/300 mm
750/750/300 mm
1000/750/300 mm
Special length*
/
/
* Attention: measure dimension tube center
min. lengths L2 and L3: 280 mm
max. lengths L1 = 1000 mm
Protective cap set
Spare blind flange untreated
Spare blind flange treated
26
Foot stand (ceiling mounting)
with cable outlet
Console adapter
Wall console
A
Accessories
Coupling for external tube fitting
mm
Stainless steel CleanTouch keyboard
Technical Data
Switching contact:
Piezo technology
Operating mechanism:
1 N + 0,7 N
Key stroke:
0 mm
•
•
•
•
Closed surface
Marked MF2-Layout
Completely stainless steel, closed version
Resistant to influences from the outside
Marking:
electrolyte mark
Key numbers:
105
Interface:
PS2, USB (1.1)
Ingress protection:
IP 67
Connection technology:
connection cable 1,8 m, screened
Service life:
> 20 x 106 actuatings
Operating temperature:
-20°C to +55°C
Storage temperature:
-25°C to +60°C
27
Stainless steel CleanTouch keyboard
Cleantouch - stainless steel keyboard offers optimal operating conditions
for all hygiene ranges. The keyboard is based on Piezo technology. The key
layout is marked on the stainless steel front plate. The surface is flat, wipe
offable, and corresponds to standard hygine requirements. Easy touching
lightly with the finger crest is sufficient, in order to release the shifting
process. A Buzzer serves as acoustic feedback for key actuation and can be
stopped alternatively. The cleaning process e.g. with steam jet or
sterilization fluid is uncritical in application. CleanTouch keyboard withstands these elements.
Programme range
Order No.
Dimensions (mm)
Stainless steel CleanTouch PS2
83.30 00 01 8
392 x 160 x 36.2 / 20.5
Stainless steel CleanTouch USB
83.30 00 02 8
392 x 160 x 36.2 / 20.5
Dimensions
Drilling pattern
cutout size
for wall
thickness
> 5 mm
28
cutout size for wall
thickness < 5 mm
Stainless steel cable glands
Type
Type:
Stainless steel
cable gland INOX
Material:
1.4305
Sealing insert:
NBR
External seal:
O-ring, NBR
Ingress protection:
IP 68
Temperature range:
-40ºC to +100ºC
Cable Ø
VPE
Order No.
7
3 - 6,5
25
08.04 13 07
9
4-8
25
08.04 13 09
11
5 - 10
25
08.04 13 11
13,5
6 - 12
25
08.04 13 13
16
10 - 14
25
08.04 13 16
21
13 - 18
25
08.04 13 21
29
18 - 25
1
08.04 13 29
36
22 - 32
1
08.04 13 36
M 12 x 1,5
3 - 6,5
10
08.04 14 12
M 16 x 1,5
5 - 10
10
08.04 14 16
M 20 x 1,5
10 - 14
10
08.04 14 20
M 25 x 1,5
13 - 18
10
08.04 14 25
M 32 x 1,5
20 - 25
5
08.04 14 32
M 40 x 1,5
22 - 32
5
08.04 14 40
Type
Cable Ø
VPE
Order No.
7
3 - 6,5
25
08.04 08 07
9
4-8
25
08.04 08 09
11
5 - 10
25
08.04 08 11
13,5
6 - 12
25
08.04 08 13
16
10 - 14
25
08.04 08 16
21
13 - 18
25
08.04 08 21
29
18 - 25
1
08.04 08 29
36
22 - 32
1
08.04 08 36
M 12 x 1,5
3 - 6,5
10
08.04 02 12
M 16 x 1,5
5 - 10
10
08.04 02 16
M 20 x 1,5
10 - 14
10
08.04 02 20
M 25 x 1,5
13 - 18
10
08.04 02 25
M 32 x 1,5
20 - 25
10
08.04 02 32
M 40 x 1,5
22 - 32
5
08.04 02 40
Cable Ø
VPE
Order No.
1
08.50 10 12
VPE
Order No.
1
08.51 10 20
PG
Metric
Type:
Stainless steel
cable gland INOX-Ex
Certificate:
II 2 G EExe II
II 1 D IP 68
Material:
1.4305
Sealing insert:
NBR
External seal:
O-ring, NBR
Ingress protection:
IP 68
Temperature range:
-20°C to +95°C
PG
Metric
Material:
Type
Pressure balance element Metric
stainless steel
M 12 x 1,5
1.4301
Sealing insert:
NBR
Ingress protection:
IP 66 / IP 69 K
Type:
Temperature range: -40°C to +120°C
Luftdurchsatz:
0,4 l/min bei 0,1 bar ÄP
5 l/min bei 1 bar ÄP
Type
Type:
Certificate:
Drain plug
stainless steel
Metric
M 20 x 1,5
II 2 G/D
Material:
1.4305
Sealing insert:
NBR
Ingress protection:
IP 66
Temperature range: -20°C to +40°C
29
30
Stainless steel / special version
Enquiry
Order
Please copy, complete and fax: +49 (0)571/5041-6
Company
Telephone
Contact
Fax
Address
E-mail
Material:
Standard, 1.4301 (304)
optional:
1.4404 (316L)
other
Wall thickness:
Standard, 1.25 mm
optional:
1.5 mm
(up to 600 mm, enclosure length / width)
2.0 mm
2.5 mm
Standard, 1.5 mm
3.0 mm
(from 600 mm, enclosure length / width)
other
mm
Enclosure size:
x
(L)
x
(W)
mm
(H)
Surface finish:
Standard: grinded, grain 240
optional:
untreated
painted, colour (RAL)
glass bead pearled
brushed
pickled
electro-polished
lengthwise grinded
Enclosure version
acc. drawing
Lid
Hinge, outside
Hinge, inside
Door
screwed
Lock
Accessories:
Mounting set (gasket, nuts, screws)
External mounting brackets
Items per annum:
Documentation enclosed:
IP
Total:
screwed
Standard offer sizes (batch sizes):
/
welded
/
dxf or dwg file
/
/
/
Drawings
Desired delivery date:
Comments:
31
Stainless steel / special version
Plan view of side layout
Lid screw with screw locking
Lid
Earth stud bolt, internal
Plan view of lid
(H)
(W)
(L)
Sid
Threaded insert
Sid
Sid
eD
eA
Inside view of base
Sid
eB
eC
Base
Screw on bracket
Break out
fastening point
External bracket
Side A
D
Side C
C
A
Side B
C
32
B
Side D
D
B
A
General technical information
Chemical resistance
When deciding whether an enclosure is resistant to the effects of chemical substances, you must
consider both the enclosure material and the type of seals.
The table below shows the most important basic materials used in ROSE enclosures and the most
frequently encountered chemical substances. This table provides information only on the extent to
which materials are essentially resistant to certain chemicals. However, you must also take into
account the concentrations and ambient temperatures.
In cases where several chemicals occur together, we recommend that you carry out a precise
investigation in order to evaluate the chemical resistance of a particular material.
Chemical resistance of enclosure materials and seals
Chemicals
Acetone
Formic acid
Ammonia
Petrol
Benzene
Brake fluid
Butane
Butanol
Calcium chloride
Chloral benzene
Diesel oil
Acetic acid
Formaldehyde
Freon 113
Fruit juice
Glycerine
Fuel oil
Hydraulic oil
Caustic potash solution
Potassium chloride
Potassium hydroxide
Linseed oil
Methane
Methylene chloride
Lactic acid
Mineral oils
Motor oils
Sodium carbonate
Sodium chloride
Sodium hydroxide
Soda lye
Nitric acid
Hydrochloric acid
Lubricating oil
Carbon bisulphide
Sulphuric acid
Suds
Cleansing agent
Terpentine oil
Carbon tetrachloride
Toluene
Trichlorethylene
Water (dest. Water,
river-, mains-, sea)
Tartaric acid
Xylene
Zinc sulphate
Citric acid
Stainless steel
EPDM
+
+
+
+
+
/
/
/
+
/
/
+
+
/
+
+
+
/
+
+
+
+
+
+
+
/
/
+
•
+
+
+
+
+
+
+
+
+
/
/
/
/
+
+
/
•
/
•
up
/
+
•
/
/
+
up
/
+
+
/
•
•
•
•
/
+
/
•
/
/
•
•
•
•
up
up
/
/
/
•
/
/
/
/
/
+
/
/
/
/
•
/
•
•
Polyurethane
/
/
+
+
to 150°C /
/
/
/
+
/
to 30 % /
/
+
+
+
/
/
+
+
/
/
+
+
/
+
/
to 10 % to 10 % +
/
/
•
•
/
+
+
/
/
Silicone
•
•
+
+
+
/
•
+
/
+
+
•
•
/
+
•
•
+
/
+
+
/
+
•
/
+
25 %
+
+
+
+
+
+
The investigations, unless stated otherwise, were carried out at room temperature. Resistances
can vary when two different materials come into contact with one another. We cannot
therefore accept liability for this data.
Explanation of symbols
+:
resistant against all concentrations
+:
resistant against maximum % concentration
C°:
resistant to maximum C°
•:
limited resistance
-:
not resistant
/:
no information
33
General technical information
Ingress protection
ROSE enclosure are classified in ingress protection to the generally applicable guidelines contained in
EN 60529 and IEC 144.
The ingress protection is indicated by an abbreviation, which is always composed of the two letters IP
and two digits relating to the protection level.
Protection class for contact and foreign body protection
First digit
Designation
0
No protection
1
Protection against large foreign bodies
2
Protection against medium-sized foreign bodies
3
Protection against small foreign bodies
4
Protection against grain-shaped foreign bodies
5
Protection against dust deposits
6
Protection against dust entry
Protection class for water protection
Second digit
Designation
0
No protection
1
Protection against vertical falling drip water
2
Protection against obliquely falling drip water
3
Protection against water spray
4
Protection against splashing water
5
Protection against water jets
6
Protection when flooded
7
Protection when immersed
8
Protection when submerged
9
Protection against high-pressure jetz*
Note:
The ingress protection indicated for the enclosures is based on non-processed
enclosures as supplied. Aging and temperature fluctuations can lead to a diminution of the
ingress protection.
* Ingress protection EN 60529
Surface
State of the art sanding and polishing techniques are used to give ROSE stainless steel enclosures a
high quality surface finish. All enclosures are guaranteed gradient and warp-free. In the final process
the stainless steel surfaces are grinded with grain 240 emery. All ROSE enclosures are naturally
supplied free from grease and dust.
Enclosures are optionally available with a bead-blasted finish.
Temperature resistance
The definition of temperature resistance for enclosures is based on the maximum continuous
temperature at which the enclosure remains dimensionally stable and the ingress protection
remains guaranteed. Admissible short term peak temperatures are often considerably higher.
The definition of temperature resistance in the case of the components of the process automation is
based to the maximum continuous temperature, provided that the factory-installed (electronic)
components are functioning correctly and the enclosure rating is maintained.
Further classifications apply to storage and transport, and are listed in the respective product
descriptions.
34
35
812080 DC 2.000
ROSE Systemtechnik GmbH
Postfach 1362
32 439 Porta Westfalica
Erbeweg 13-15
32 457 Porta Westfalica
36
Fone
Fax
E-Mail
Web
+49 571 50 41 0
+49 571 50 41 6
[email protected]
www.rose-pw.de