Photoelectric sensors FPDM 16 (standard version) Retro-reflective sensors sample drawing 50 4 LED * 26,5 50 4,3 8,5 4,3 12 30 4 15,4 25 M12 x 1 36 3 * emitter axis general data sample picture type retro-reflective sensor light source pulsed red LED actual range Sb 7,3 m nominal range Sn 8,5 m polarization filter yes alignment / soiled lens indicator flashing light indicator light indicator LED yellow wave length 660 nm suppression of reciprocal influence yes electrical data response time / release time < 1 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 36 mA current consumption typ. 26 mA voltage drop Vd < 1,8 VDC output function light / dark operate output current < 200 mA short circuit protection yes reverse polarity protection yes mechanical data width / diameter 15,4 mm height / length 50 mm depth 50 mm type rectangular housing material die-cast zinc front (optics) PMMA ambient conditions operating temperature -25 ... +65 °C protection class IP 67 1 www.baumer.com 2/6/2015 Photoelectric sensors FPDM 16 (standard version) Retro-reflective sensors order reference connection types output circuit sensitivity adjustment FPDM 16N5101 cable 4 pin, 2 m NPN no FPDM 16N5101/S14 connector M12 4 pin NPN no FPDM 16P5101 cable 4 pin, 2 m PNP no FPDM 16P5101/S14 connector M12 4 pin PNP no FPDM 16P5105 cable 4 pin, 2 m PNP potentiometer, 10 turn FPDM 16P5105/S14 connector M12 4 pin PNP potentiometer, 10 turn 2 www.baumer.com 2/6/2015