Photoelectric sensors OPDM 16 (Laser) Retro-reflective sensors sample drawing 50 4 LED * 21,5 50 4,3 8,5 4,3 12 30 4 15,4 25 M12 x 1 36 3 * emitter axis general data sample picture type retro-reflective laser sensor light source pulsed red laser diode polarization filter yes alignment / soiled lens indicator flashing light indicator light indicator LED yellow laser class 1 wave length 650 nm actual range Sb = 7,5 m nominal range Sn 8,3 m repeat accuracy < 0,1 mm at laser focus sensitivity adjustment potentiometer, 270° distance to focus 80 mm actual range Sb = 11 m nominal range Sn 12 m repeat accuracy < 1,5 mm at 0 ... 0,5 m sensitivity adjustment no distance to focus 400 mm laser warning CLASS 1 LASER PRODUCT electrical data Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 response time / release time < 0,1 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 70 mA current consumption typ. 60 mA voltage drop Vd < 2 VDC output function light / dark operate output circuit PNP output current < 200 mA short circuit protection yes reverse polarity protection yes mechanical data width / diameter 15,4 mm height / length 50 mm depth 50 mm type rectangular housing material die-cast zinc front (optics) glass 1 www.baumer.com 17/6/2015 Photoelectric sensors OPDM 16 (Laser) Retro-reflective sensors ambient conditions operating temperature -10 ... +50 °C protection class IP 67 order reference actual range Sb connection types OPDM 16P5102 11 m cable 4 pin, 2 m OPDM 16P5102/S14 11 m connector M12 4 pin OPDM 16P5103/S14 7,5 m connector M12 4 pin 2 www.baumer.com 17/6/2015