Photoelectric sensors FPDK 07N6901/KS35A Retro-reflective sensors dimension drawing 23,5 10,7 12,4 21,4 7,5 L 15,4 13,4 3 6,2 ø 2,5 18 3 *4 6 8,25 9,3 ca. 34 2x ø 3,2 8 1,5 17,8 9,2 12,6 6,4 ø Teach-in LED M8 x 1 * emitter axis general data photo type retro-reflective sensor light source pulsed red LED actual range Sb 0,6 m nominal range Sn 0,8 m polarization filter yes alignment / soiled lens indicator flashing light indicator light indicator LED green output indicator LED yellow sensitivity adjustment Teach-in wave length 660 nm suppression of reciprocal influence yes electrical data connection diagram response time / release time < 0,5 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 25 mA current consumption typ. 20 mA voltage drop Vd < 1,8 VDC output function light / dark operate output circuit NPN output current < 100 mA short circuit protection yes reverse polarity protection yes BN (1) NPN WH (2) BK (4) BU (3) +VS Z ext. teach light/dark 0V mechanical data width / diameter 8 mm height / length 17,8 mm depth 12,6 mm type rectangular housing material plastic (PMMA, MABS, PA) front (optics) PMMA connection types flylead connector M8 4 pin, L=200 mm sensitivity adjustable: via Teach-in button or Teach-in wire input ambient conditions operating temperature -20 ... +50 °C protection class IP 65 FPDK 07N6901/KS35A www.baumer.com 24/4/2015