1800W PowerVerter Automotive/Truck Inverter with 4 Outlets MODEL NUMBER: PV1800HF Highlights 12V DC input; 120V AC output; 4 outlets 1800 watts continuous output 3600 watts peak output (instantaneous) Powers an entire mobile office Package Includes PV1800HF Inverter Warranty information Instruction manual Description Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1800 watts of 120V AC power to 4 AC outlets from any 12V battery or automotive DC source. Includes a set of nut-and-bolt style DC terminals for simple installation. Compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level. NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 250a should be positioned no more than 18" from the PV1800HF's battery in the positive line. Features Allows users to run AC appliances from a properly sized 12V battery or automotive DC system Converts 12V DC battery power to 120V AC power 1800 watts continuous output power; 3600 watts peak output power (instantaneous) 4 outlets Compact, lightweight design with grooved surface for efficient cooling, all-metal housing Diagnostic LEDs indicates low battery voltage level and load level Low battery alarm with auto-shutoff prevents deep battery discharge High-efficiency operation conserves batteries to prolong run time Cooling fan regulates internal temperature and prolongs unit service life Specifications OUTPUT Nominal Output Voltage(s) Supported 120V Frequency Compatibility 60 Hz 1/3 Output Receptacles (4) 5-15R Output (Watts) 1800 Continuous Output Capacity (Watts) 1800 Peak Output Capacity (Watts) 3600 Output Voltage Regulation Maintains PWM sine wave output voltage of 115 VAC (+/- 8 VAC) Output Frequency Regulation 60 Hz (+/- 3 Hz) Overload Protection Automatic overload protection shuts down inverter system in the event of overloads. INPUT Recommended Electrical Service Requires 12VDC input source capable of delivering 200A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 250A battery system fusing is recommended. Maximum Input Amps / Watts Full continuous load - 200A at 12VDC, No load - 2.7A at 12VDC, Shutdown Input Connection Type Set of 2 DC bolt-down wiring terminals. User supplies cabling; minimum gauges for full load operation: 0 (16 ft max), 00 or 2/0 (20 ft max) Voltage Compatibility (VDC) 12 BATTERY DC System Voltage (VDC) 12 USER INTERFACE, ALERTS & CONTROLS Audible Alarm Dual-function alarm indicates overload conditions or low DC input voltage of 10.5V or less. PHYSICAL Shipping Dimensions (hwd / in.) 5.25 x 7.75 x 17.25 Shipping Dimensions (hwd / cm) 13.34 x 19.69 x 43.82 Shipping Weight (lbs.) 8 Shipping Weight (kg) 3.6 Unit Dimensions (hwd / in.) 4 x 6 x 15 Unit Dimensions (hwd / cm) 10.16 x 15.24 x 38.1 Unit Weight (lbs.) 7.25 Unit Weight (kg) 3.3 Cooling Method Fan Material of Construction Aluminum/sheet metal Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) ENVIRONMENTAL Relative Humidity 0-95% non-condensing 2/3 SPECIAL FEATURES Remote Control Capability Yes TVSS Grounding Grounding lug grounds the inverter to vehicle or earth ground; user supplies cabling WARRANTY Product Warranty Period (Worldwide) 1-year limited warranty © 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: http://www.tripplite.com/products/product-certification-agencies 3/3