PCN / EOL Notification PCN Number: HC133303 Notification Date*: September 4, 2013 Title: Transfer of RFID Transponder Production Product Identification: Old Part Number New Part Number TK5551M-PP ATA5551M-PPMY ATA5551M-PP ATA5551M-PPMY ATA5577M1330C-PP ATA5577M1330C-PPMY Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: The Atmel own Transponder manufacturing line will be discontinued due to technical production reasons. The replacement types will be supplied by an external subcontractor. Identification Method to Distinguish Change: Old Part Number New Part Number TK5551M-PP ATA5551M-PPMY ATA5551M-PP ATA5551M-PPMY ATA5577M1330C-PP ATA5577M1330C-PPMY Qualification Data: Available Will be available (mm/dd/yr): 11/29/2013 Not Applicable Samples: Available Will be available (mm/dd/yr): 10/4/2013 Not Applicable Quantifiable Impact on Quality & Reliability: A quality report will be made available. Forecasted Availability Date: 1/1/2014 Last Time Buy Date: 11/1/2013 Last Ship Date: 12/31/2014 *All orders placed after the notification date are non-cancellable and non-returnable (NCNR). ATMEL Automotive GmbH • Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN • Germany QF-8005 Rev. 14 07/23/2013 Page 1 of 2 PCN/EOL NO. HC133303 Page 2 of 2 Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. Attention Distributors: Product(s) identified in this notification will become obsolete and as such this EOL notification will act as the official written notification. All obsolete products will be listed in the next published quarterly distributor price book, following an PCN/EOL change, and listed on the obsolescence form which accompanies said price book. Within thirty (30) days from the published date of the price book, Distributor shall notify Atmel in writing of Distributor’s then current inventory of the obsolete product CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN / EOL. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Automotive GmbH • Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN • Germany QF-8005 Rev. 14 07/23/2013