PCN / EOL Notification ® Product Change Notification Number: HC121801C (REVISED 11/16/2012) See Below Corrected Part Number Notification Date*: May 8, 2012 Title: Change to an Assembly Subcontractor ATA6826C-TUQY-66 Product Identification: Triple half-bridge driver IC ATA6826C-TUQY-66 Reason for Change: Material / Composition Design / Firmware Manufacturing Location Processing / Manufacturing Logistics Quality / Reliability Change Description: Thailand was hit by a devastating flood that impacted the production of Atmel's assembly subcontractor Chinteik Electronic Industries Co., Ltd (CEI). Due to the continued serious flooding the production at the CEI facilities disrupted for an indefinite period of time. This uncertainty has led Atmel to stop the manufacturing in the current assembly location and to transfer the assembly activities of the Triple half-bridge driver IC ATA6826C-TUQY and ATA6826C-TUQY 71 ATA6826CTUQY-71 to ASE Shanghai, China. This transfer was announced in an ACN dated November 21, 2011. The package qualification is completed now. Identification Method to Distinguish Change: New ordering code is ATA6826C-TUQY-66; the previous ordering code ATA6826C-TUQY and ATA6826C-TUQY 71 ATA6826C-TUQY-71 are no longer valid. Qualification Data: Available Will be available (mm/dd/yr): Not Applicable Samples: Available Will be available (mm/dd/yr): Not Applicable Quantifiable Impact on Quality & Reliability: None Forecasted Availability Date: Available now Last Time Buy Date: N/A (No further production of the CEI assembled part) Last Ship Date: N/A *All orders placed after the notification date are non-cancellable and non-returnable (NCNR). Atmel Contact: [email protected] Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. Attention Distributors: Product(s) identified in this notification will become obsolete and as such this EOL notification will act as the official written notification. All obsolete products will be listed in the next published quarterly distributor price book, following an PCN/EOL change, and listed on the obsolescence form which accompanies said price book. Within thirty (30) days from the published date of the price book, Distributor shall notify Atmel in writing of Distributor’s then current inventory of the obsolete product ATMEL Automotive GmbH • Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN • Germany QF-8005 Rev. 09 04/18/12 Page 1 of 2 PCN/EOL NO. HC121801C Page 2 of 2 CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN / EOL. Please complete and email to the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Automotive GmbH • Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN • Germany QF-8005 Rev. 09 04/18/12