TECHNICAL CHARACTERISTICS 7.62 ±0.3 O 0.8 2.54 ±0.03 A u0.2 2.54 ±0.03 0.6 ±0.03 MATERIAL >Cover: PPS UL 94V-0, color Black >Base: HTN UL 94V-0, color Black >Actuator: PA 46 UL 94V-0, color White >Contact: Gold Plated >Terminal: Tin Plated 0.32 ±0.05 6.5 ±0.1 3.7 ±0.2 0.4 ±0.1 9.4 ±0.2 SPECIFICATION >Contact Rating: Switching: 25mA, 24VDC Non-Switching: 100mA, 50VDC >Contact Resistance: Initial: 50mOHM max. After Life Test: 100mOHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 500VAC for 1 minute >Operating Force: 1000g max. >Mechanical Life: min. 5000 cycles >Electrical Life: 2000 cycles / 25mA, 24VDC >Flat Actuator Type Wiring Diagram SOLDERING INFORMATION >Terminal in THT version >Wave soldering 260°C 10 sec. max >Hand soldering with 30W or under at 350°C for 3 sec. max or at 270°C for 5 sec. max >Keep in "off" position during soldering >Ultrasonic cleaning not re-commended >Any inflow of Flux into the switch may influence the contact function 7.62 ±0.3 1.2 ±0.03 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach PACKAGING INFORMATION >Tube packaging only >On delivery in "off" position 1.44 ±0.03 DIMENSION Scale - 2:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Projection Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, b Revised MatchCode14-07-24 AL when used in electrical circuits that require high safety, reliability functions a warning text 11-10-26 WJ or performance, the sufficient reliability evaluation-check for the safety REV FILE DATE BY must be performed before by the user before usage. No.Of Pole 2 3 4 5 Dim. A (mm) 6.08 8.62 11.16 13.70 No.Of Pole 8 10 12 Dim. A (mm) 21.32 26.40 31.48 GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Basic material Date Drawn 09-02-24 Checked 09-02-24 DESCRIPTION WE RDX CAD EDV NO Name Jelisarow Hsu 7 18.78 WS-DITU, Piano type THT version, flat Actuator without top tape sealed 2:1 Würth Elektronik Scale RDX Drawing.- No. 4183171709xx.dft 6 16.24 Position 4183171709xx SIZE A4 System :Solid Edge V20