PD-2.294 rev. A 12/97 225CNQ015 SCHOTTKY RECTIFIER 220 Amp Major Ratings and Characteristics Characteristics Description/Features 225CNQ015 Units The 225CNQ015 high current, center tap Schottky modules have been optimized for ultra low forward voltage drop specifically for the OR ' ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 100° C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. IF(AV) Rectangular waveform 220 A VRRM 15 V 10,800 A 100° C TJ operation Center tap module 0.32 V Optimized for OR ' ing applications High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance - 55 to 100 °C Ultra low forward voltage drop High frequency operation IFSM @ tp = 5 µs sine VF @ 110Apk, TJ=75°C (per leg) TJ range Guard ring enhanced ruggedness and long term reliability CASE STYLE AND DIMENSIONS Modified JEDEC Outline TO - 244AB Dimensions in millimeters and inches www.irf.com 1 225CNQ015 Series PD-2.294 rev. A 12/97 Voltage Ratings Part number VR 225CNQ015 Max. DC Reverse Voltage (V) 15 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 225CNQ Units IF(AV) Max. Average Forward Current * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 220 10,800 A A 1700 EAS Non-Repetitive Avalanche Energy (Per Leg) 9 mJ IAR 2 A Repetitive Avalanche Current (Per Leg) Conditions 50% duty cycle @ TC = 74 °C, rectangular wave form Following any rated load condition and with rated VRRM applied 10ms Sine or 6ms Rect. pulse 5µs Sine or 3µs Rect. pulse TJ = 25 °C, IAS = 2 Amps, L = 4.5 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 3.0 x VR typical Electrical Specifications Parameters VFM IRM 225CNQ Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Conditions Max. Reverse Leakage Current 0.38 0.49 0.32 0.42 40 V V V V mA @ 110A @ 220A @ 110A @ 220A TJ = 25 °C (Per Leg) * See Fig. 2 2000 mA TJ = 125 °C 1780 mA TJ = 100 °C VR = 12 V 1080 mA TJ = 100 °C VR = 5 V 7700 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C 7.0 nH From top of terminal hole to mounting plane 10,000 V/ µs (1) CT Max. Junction Capacitance (Per Leg) LS Typical Series Inductance (Per Leg) dv/dt Max. Voltage Rate of Change (Rated VR) Parameters 225CNQ Units TJ Max. Junction Temperature Range -55 to 100 °C Tstg Max. Storage Temperature Range -55 to 100 °C 2 TJ = 75 °C VR = rated VR (1) Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T Mounting Torque Base Min. Max. Mounting Torque Center Hole Typ. Terminal Torque Min. Max. Case Style TJ = 25 °C Conditions 0.40 °C/W DCoperation * See Fig. 4 0.20 °C/W DCoperation 0.10 °C/W Mounting surface , smooth and greased 79 (2.80) g (oz.) 40 (35) 58 (50) 17 (15) Kg-cm 58 (50) (Ibf-in) 86 (75) TO - 244AB Modified JEDEC www.irf.com 225CNQ015 Series PD-2.294 rev. A 12/97 10000 ReverseCurrent - I (mA) R 100 T =100°C J 1000 75°C 100 50°C 25°C 10 1 0 5 10 15 ReverseVoltage- VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) T =100°C J T = 75°C J 10000 T = 25°C J JunctionCapacitance- C (pF) T InstantaneousForwardCurrent - I (A) F 1000 10 1 0 .1 .2 .3 .4 .5 .6 .7 T =25°C J 1000 0 .8 5 ForwardVoltageDrop- VFM(V) 10 15 20 25 30 ReverseVoltage- V (V) R Fig. 1 - Max. Forward Voltage Drop Characteristics (PerLeg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance- Z (°C/W) thJC 1 D=0.50 .1 D=0.33 D=0.25 P DM D=0.17 t 1 t2 D=0.08 Notes: 1. Duty factor D= t1/ t2 .01 Single Pulse (Thermal Resistance) .001 .00001 .0001 .001 2. PeakT =P x Z +T J DM thJC C .01 .1 1 10 100 t1, Rectangular Pulse Duration(Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 225CNQ015 Series PD-2.294 rev. A 12/97 50 225CNQ015 R (DC) =0.40°C/W thJC 100 AveragePower Loss- (W atts) AllowableCaseTemperature -(°C) 105 95 90 DC 85 80 75 0 40 80 120 D=0.08 D=0.17 40 D=0.25 D=0.33 D=0.50 30 RMSLimit DC 20 10 0 0 160 40 80 120 160 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (PerLeg) Non-Repetitive Surge Current - I FSM (A) 10000 At Any Rated Load Condition And With Rated V RRM Applied Following Surge 1000 10 100 1000 10000 Square Wave Pulse Duration - t p(microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com