DIY chipKITā¢ Board This project can be easily done with common tools found in most home Maker shops! Instructions available at http://chipkit.net/diy-chipkit-board Bill of Materials: Quantity 1 Device PIC32MX250F128BPreprogrammed with chipKIT USB Bootloader Manufacturer Microchip 1 1 4 1 2 1 4 1 2 1 IC REG LDO 3.3V 0.25A TO92-3 CRYSTAL 8.00MHZ 18PF THRU CAP CER 0.1UF 50V 10% AXIAL CAP TANT 10UF 16V 10% RADIAL CAP CER 36PF 50V 5% RADIAL RES 130 OHM 1/4W 5% CARBON FILM RES 10.0K OHM 1/4W 5% AXIAL LED SS 5MM 625NM RED DIFF SWITCH TACTILE SPST-NO 0.02A 15V Breakout Board for USB microB Microchip ECS Inc Vishay Vishay Kemet Yageo TE Connectivity Kingbright Corp Panasonic Sparkfun Manufacturer Part Number TCHIP-USB-MX250F128B Available May 24/2013 at www.microchipdirect.com MCP1702-3302E/TO ECS-80-18-1 A104K15X7RF5TAA 199D106X9016C1V1E3 C317C360J5G5TA CFR-25JB-52-130R 1625875-6 WP7113ID EVQ-11L07K BOB-09614 Schematic www.chipkit.net