Photoelectric sensors OADM 13 (Laser, voltage output) Distance sensors sample drawing * 34,75 48,2 LED M8 x 1 39,2 6,45 Teach-in 41 13,4 4,2 3,6 40 29 2,1 * emitter axis general data sample picture adjustment Teach-in: button / external power on indication LED green soiled lens indicator LED red light source pulsed red laser diode wave length 650 nm laser class 2 interference suppression < 30 ms measuring distance Sd = 50 ... 350 mm Teach-in range min. > 5 mm resolution 0,01 ... 0,4 mm linearity error ± 0,05 ... ± 1,2 mm temperature drift < 0,04 % Sde/K measuring distance Sd = 50 ... 550 mm Teach-in range min. > 10 mm resolution 0,01 ... 1,15 mm linearity error ± 0,08 ... ± 3,5 mm temperature drift < 0,07 % Sde/K laser warning LASER RADIATION DO NOT STARE INTO BEAM Wavelength: 620...680nm Max. av. Output: < 1mW IEC 60825-1, Ed. 2, 2007 CLASS 2 LASER PRODUCT electrical data Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 voltage supply range +Vs 12 ... 28 VDC current consumption max. (no load) 80 mA output circuit analog output signal 0 ... 10 VDC remarks load resistance > 100 kOhm short circuit protection yes reverse polarity protection yes, Vs to GND For objects with a reflectivity < 6 %, the response time / release time is increased automatically up to max. 3 ms (OADM 13x6x75/S35A) resp. 5 ms (OADM 13x7x80/S35A). Missed measurement up to 30 cycles (30 ms) will be suppressed. During this time the analog output stays on hold. mechanical data width / diameter 13,4 mm height / length 48,2 mm depth 40 mm type rectangular housing material aluminum front (optics) glass connection types connector M8 4 pin 1 www.baumer.com 19/6/2015 Photoelectric sensors OADM 13 (Laser, voltage output) Distance sensors ambient conditions operating temperature 0 ... +50 °C protection class IP 67 order reference measuring distance Sd response time / release time beam type beam width beam height beam diameter ambient light immunity OADM 13U6475/S35A 50 ... 350 mm < 0,9 ms point - - 1 mm < 20 kLux OADM 13U6575/S35A 50 ... 350 mm < 0,9 ms line 2 mm 4 ... 9 mm - < 30 kLux OADM 13U7480/S35A 50 ... 550 mm < 2 ms point - - 1 mm < 40 kLux OADM 13U7580/S35A 50 ... 550 mm < 2 ms line 2 ... 1 mm 4 ... 11 mm - < 40 kLux 2 www.baumer.com 19/6/2015