Product Change Notification PCN Number: HC133304 Notification Date: September 11, 2013 Title: ATA6663-FAQW Additional Assembly Location Product Identification: Current Part ID New Part ID ATA6663-FAQW ATA6663-FAQW-1 Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: As part of long term second source strategy for DFN assembly, Atmel has selected automotive certified supplier ASE (ChungLi, Taiwan) as second qualified source. ASE (ChungLi, Taiwan) is a strategic assembly partner and high volume sub-contractor for Atmel. The ATA6663-FAQW has a broad, global, customer base and is running in high volumes. The addition of a new assembly subcontractor is necessary to meet increasing demand. Package and footprint remain the same. Package qualification has been successfully completed in all respects with no technical/material deviation to the original package, making it drop-in replacement suitable. Identification Method to Distinguish Change: Lot number Qualification Data: Samples: Available Will be available (mm/dd/yr): Not Applicable Will be available (mm/dd/yr): Not Applicable (See the attached qual report) Available Quantifiable Impact on Quality & Reliability: No Impact. Estimated Availability Date*: Now *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. ATMEL Automotive GmbH • Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN • Germany QF-8004 Rev. 11 05/09/2013 Page 1 of 2 PCN NO. HC133304 Page 2 of 2 Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or noninfringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Automotive GmbH • Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN • Germany QF-8004 Rev. 13 07/23/2013 Qualification Report ATA6663-DFN AT75k ata6663.dll Product Technology Final Test Objective Special Practice Stress Test Quality Engineer Wafer Fab X Cold Temp. D. Garmatter Phone CSO Package -40 °C X Room Temp. & intRNnumber & '!ExterneDaten8 Start Date PASS +49 7131 67-2834 DFN8 25 °C Issue Date Assembly Site X Hot Temp. 2013-08-16 ASE 125 °C Package Transfer 2013-04-12 2013-08-16 Completion Date Family Qualification together with ATA6670 Operating temperature grade 1 (-40°C to +125°C); Pre-conditioning (PC): 1 = HTS 125°C/24h, 85°C/85%rH/168h, IR reflow 260°C/3x Reliability Tests and Results PC Standard S.S. Conditions Reg.No. Rev. Lot Code Fails Result Comments HTS 125°C, 85°C/85%rH, IR 1 J-STD-020 11 1621 EV72460 0 PASS reflow 260°C/3x; Tm=RT/HT HTS 125°C, 85°C/85%rH, IR 1 J-STD-020 11 1620 EV72450 0 PASS reflow 260°C/3x; Tm=RT/HT 85°C / 85%rH / 1000h; 1 JESD22-A101 77 cf. <Product> Tm=RT/HT 85°C / 85%rH / 1000h; 1 JESD22-A101 77 cf. <Product> Tm=RT/HT 85°C / 85%rH / 1000h; cf. <Product> 1 JESD22-A101 77 Tm=RT/HT X A1 MSL X A1 MSL A2 THB A2 THB A2 THB X A2 HAST 1 JESD22-A110 77 130°C / 85%rH / 96h; Tm=RT/HT 1622 EV72450 X A2 HAST 1 JESD22-A110 77 130°C / 85%rH / 96h; Tm=RT/HT 1633 EV72490 Generic ATA6670, ASE DFN14 X A2 HAST 1 JESD22-A110 77 130°C / 85%rH / 96h; Tm=RT/HT 1632 EV72480 Generic ATA6670, ASE DFN14 A3 A3 A3 A3 A3 A3 X A4 AC AC AC UHST UHST UHST TC 1 1 1 1 JESD22-A102 JESD22-A102 JESD22-A102 JESD22-A118 JESD22-A118 JESD22-A118 JESD22-A104 77 77 77 77 77 77 77 X A4 TC 1 JESD22-A104 77 X A4 TC 1 JESD22-A104 77 A5 PTC JESD22-A105 45 121°C / 15psig / 96h; Tm=RT 121°C / 15psig / 96h; Tm=RT 121°C / 15psig / 96h; Tm=RT 130°C / 85%rH / 96h; Tm=RT 130°C / 85%rH / 96h; Tm=RT 130°C / 85%rH / 96h; Tm=RT -65°C / 150C°C / 1500x; Tm=HT -65°C / 150C°C / 1300x; Tm=RT/HT -65°C / 150C°C / 1300x; Tm=RT/HT -40°C / 150°C / 1000x; Tm=RT/HT 1/4 0 PASS cf. <Product> cf. <Product> 1623 EV72450 0 1635 EV72490 Generic ATA6670, ASE DFN14 1634 EV72480 Generic ATA6670, ASE DFN14 PASS Qualification Report ATA6663-DFN AT75k ata6663.dll Product Technology Final Test Objective Special Practice Stress Test HTSL — JESD22-A103 X B1 HTOL — JESD22-A108 X B1 HTOL — JESD22-A108 X B1 HTOL — JESD22-A108 LTOL — JESD22-A108 X B2 ELFR — X B2 ELFR — X B2 ELFR — B3 B3 B3 EDR EDR EDR X C1 WBS — X X X X X X X WBP SD SD SD PD PD PD — — — — AEC-Q100-008, JESD22-A108 AEC-Q100-008, JESD22-A108 AEC-Q100-008, JESD22-A108 AEC-Q100-005 AEC-Q100-005 AEC-Q100-005 AEC-Q100-001, JESD22-B116 MIL-STD-883-2011 JESD22-B102 JESD22-B102 JESD22-B102 JESD22-B100/B108 JESD22-B100/B108 JESD22-B100/B108 C2 C3 C3 C3 C4 C4 C4 D. Garmatter Phone CSO Package -40 °C X Room Temp. & intRNnumber & '!ExterneDaten8 Start Date +49 7131 67-2834 DFN8 25 °C Issue Date Assembly Site X Hot Temp. 2013-08-16 ASE 125 °C Package Transfer 2013-04-12 2013-08-16 Completion Date Family Qualification together with ATA6670 Operating temperature grade 1 (-40°C to +125°C); Pre-conditioning (PC): 1 = HTS 125°C/24h, 85°C/85%rH/168h, IR reflow 260°C/3x Reliability Tests and Results PC Standard S.S. Conditions Reg.No. Rev. Lot Code Fails Result Comments X A6 (B1) Quality Engineer Wafer Fab X Cold Temp. PASS 45 Ts=150°C / 1000h; Tm=RT/HT Ta=125°C / Tj=150°C / 408h; Tm=LT/RT/HT Ta=125°C / Tj=150°C / 408h; 77 Tm=LT/RT/HT Ta=125°C / Tj=150°C / 408h; 77 Tm=LT/RT/HT Ta=-50°C / Tj=-25°C / 1000h; 32 Tm=RT/HT Ta=125°C / Tj=150°C / 48h; 800 Tm=RT/HT Ta=125°C / Tj=150°C / 48h; 800 Tm=RT/HT Ta=125°C / Tj=150°C / 48h; 799 Tm=RT/HT 77 Tm=RT/HT 77 Tm=RT/HT 77 Tm=RT/HT 77 1624 EV72450 0 1639 EV72500 Generic ATA6670, ASE DFN14 1638 EV72490 Generic ATA6670, ASE DFN14 1637 EV72480 Generic ATA6670, ASE DFN14 1674 EV73380 Generic ATA6670, ASE DFN14 1641 EV72490 Generic ATA6670, ASE DFN14 1640 EV72480 Generic ATA6670, ASE DFN14 PASS cf. <Product> cf. <Product> 5 30 bonds 1643 EV72480 5 15 15 15 10 10 10 30 bonds HTS 150°C, SnAgCu, 245°C HTS 150°C, SnAgCu, 245°C HTS 150°C, SnAgCu, 245°C 1643 1627 1626 1625 EV72480 EV72470 EV72460 EV72450 EV72470 EV72460 EV72450 2/4 Generic ATA6670, ASE DFN14 0 0 0 Generic ATA6670, ASE DFN14 PASS PASS PASS PASS PASS PASS Qualification Report ATA6663-DFN AT75k ata6663.dll Product Technology Final Test Objective Special Practice Stress Test Quality Engineer Wafer Fab X Cold Temp. D. Garmatter Phone CSO Package -40 °C X Room Temp. & intRNnumber & '!ExterneDaten8 Start Date PASS +49 7131 67-2834 DFN8 25 °C Issue Date Assembly Site X Hot Temp. 2013-08-16 ASE 125 °C Package Transfer 2013-04-12 2013-08-16 Completion Date Family Qualification together with ATA6670 Operating temperature grade 1 (-40°C to +125°C); Pre-conditioning (PC): 1 = HTS 125°C/24h, 85°C/85%rH/168h, IR reflow 260°C/3x Reliability Tests and Results PC Standard S.S. Conditions Reg.No. Rev. Lot Code Fails Result Comments AEC-Q100-010, 10 5 balls JESD22-B117 AEC-Q100-010, 10 5 balls JESD22-B117 AEC-Q100-010, 10 5 balls JESD22-B117 JESD61, — JESD202, -JEP119 JESD35, — -JESD92 JESD28, — -JESD60 — JESD90 --JESD87 AEC-Q100-002, — 3 4kV; Tm=RT/HT 1 JS-001-2010, AEC-Q100-003, — 3 300V; Tm=RT/HT 1 ESD STM5.2, C5 SBS C5 SBS C5 SBS D1 EM D2 TDDB D3 HCI D4 D5 NBTI SM E2 HBM E2 MM E3 CDM — ESD STM.5.3.1 3 750V; Tm=RT/HT 1 E4 LU — 6 Ta=25°C/125°C; Tm=RT/HT 1 X E5 ED — 30 Tm=CT/RT/HT 1726 EV72470 0 PASS X E5 ED — 30 Tm=CT/RT/HT 1725 EV72460 0 PASS X E5 ED — AEC-Q100-004, AEC-Q100-009, JESD86 AEC-Q100-009, JESD86 AEC-Q100-009, JESD86 30 Tm=CT/RT/HT 1724 EV72450 0 PASS 3/4 Qualification Report ATA6663-DFN AT75k ata6663.dll Product Technology Final Test Objective Special Practice Stress Test D. Garmatter Phone CSO Package -40 °C X Room Temp. & intRNnumber & '!ExterneDaten8 Start Date +49 7131 67-2834 DFN8 25 °C Issue Date Assembly Site X Hot Temp. 2013-08-16 ASE 125 °C Package Transfer 2013-04-12 2013-08-16 Completion Date Family Qualification together with ATA6670 Operating temperature grade 1 (-40°C to +125°C); Pre-conditioning (PC): 1 = HTS 125°C/24h, 85°C/85%rH/168h, IR reflow 260°C/3x Reliability Tests and Results PC Standard S.S. Conditions Reg.No. Rev. Lot Code Fails Result Comments E6 FG E7 X E8 E9 CHAR GL EMC — — E9 SL-HBM — E10 E10 E10 E11 F1 F2 Quality Engineer Wafer Fab X Cold Temp. PASS SC SC SC SER PAT SBA Stress Test Classification: AEC-Q100-007 -- AEC-Q003 AEC-Q100-006 SAE J1752/3 IEC/TS 62228, IEC 61000-4-2 AEC-Q100-012 AEC-Q100-012 AEC-Q100-012 JESD89-1/2/3 AEC-Q001 AEC-Q002 -6 1 Tm=CT/RT/HT Tm=RT 3 8kV; Tm=RT/HT 1727 1 EV72470 1 0 PASS 1 10 10 10 3 All All X = Required I = Only for investigation purposes Atmel Automotive GmbH is certified according to ISO 9001:2008 and ISO/TS 16949:2009 Atmel Automotive GmbH • Theresienstrasse 2 • Postfach 35 35 • 74025 Heilbronn • Germany Tel.: (+49) 7131 67-0 • Fax: (+49) 7131 67-2340 • www.atmel.com Geschäftsführung: Steven Alan Laub, Stephen Cumming, Dr Matthias Kästner Sitz der Gesellschaft: Heilbronn • Amtsgericht: Stuttgart • HRB 106594 • USt-ID-Nr.: DE200364460 Bankverbindung: Commerzbank Heilbronn (BLZ 620 400 60) 311 2828 • IBAN: DE19 6204 0060 0311 2828 00 • Swift: COBADEFF620 Bank of America N.A. (BLZ 500 109 00) 18639038 • IBAN: DE62 5001 0900 0018 6390 38 • Swift: BOFADEFXXXX QualReport Rev. 20.4, 10/2012 4/4