Product Change Notification PCN Number: RC142903 Notification Date: July 28, 2014 Title: SAM7X256/128 Rev C - Wafer Foundry Transfer from LFoundry to UMC Product Identification: Part Number AT91SAM7X256C-AU AT91SAM7X256C-AUR AT91SAM7X256C-CU AT91SAM7X256C-CUR AT91SAM7X128C-AU AT91SAM7X128C-AUR AT91SAM7X128C-CU AT91SAM7X128C-CUR Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: The above listed devices will be transferred to UMC wafer fabrication facility to ensure an uninterrupted flow of product to meet customer production demands. The facility will manufacture the parts to the same specification as LFoundry and will meet all the datasheet parameters. The UMC parts will be compatible in form, fit, and function to the LFoundry material and will also be a drop-in replacement to products that are currently being produced in the LFoundry facility. Samples are only available in bulk and can be ordered through Atmel Sample Centre by logging on to: www.atmel.com/samples Specific ordering codes for new die revision samples only are shown in the table below, and are available for sample orders only until the proposed first shipment date. For all production orders, only standard existing ordering codes will be accepted. Part Number Ordering code for sample AT91SAM7X256C-AU AT91SAM7X256C-AUS AT91SAM7X256C-CU AT91SAM7X256C-CUS AT91SAM7X128C-AU AT91SAM7X128C-AUS AT91SAM7X128C-CU AT91SAM7X128C-CUS Note that the S in sample ordering codes will not be marked on the package. ATMEL Rousset Zone industrielle 13106 ROUSSET Cedex France QF-8004 Rev. 13 07/23/2013 Page 1 of 2 PCN NO. RC142903 Page 2 of 2 Identification Method to Distinguish Change: New die source can be identified by lot code. Qualification Data: Available Will be available (mm/dd/yr): Not Applicable Samples: Available Will be available (mm/dd/yr): Not Applicable Quantifiable Impact on Quality & Reliability: No impact. Proposed First Ship Date*: October 28, 2014 *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or noninfringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Rousset Zone industrielle 13106 ROUSSET Cedex France QF-8004 Rev. 13 07/23/2013