Product Change Notification PCN Number: HC151402 Notification Date: April 14, 2015 Title: Change of Assembly Location ATA664151 Product Identification: ATA664151-WNQW Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: (1) In order to align its overall backend production strategy, ATMEL will introduce ASE Chung Li Taiwan as IC assembly subcontractors for automotive products. ASE Chungli Taiwan, has a long term experience as automotive assemblers, and is TS16949 certified and ATMEL qualified suppliers with existing business. The assembly of affected IC will be moved to ASE Chung Li Taiwan. Package comparison is available in the appendix. Marking will be changed from old ATMEL Logo to new ATMEL Logo (2) Change of Design Revision to improve System Level ESD Robustness (3) Datasheet change: Test / Parameter / Feature VCC regulator under-voltage detection hysteresis, P. 17.11 Original value Parameter 17.11 LL=190 / T=300 / UL=400mV New value Parameter 17.11 LL=120 / T=160 / UL=300mV Identification Method to Distinguish Change: Devices can be tracked by lot number and date code which is part of the package marking. New ordering code has been created by adding a suffix or by changing to the new package code to manage backlog conversion. Ordering code old Ordering code new ATA664151-WNQW ATA664151-WNQW-1 Qualification Data: Available Will be available (mm/dd/yr): 04/24/2015 Not Applicable ATMEL Automotive GmbH Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany QF-8004 Rev. 15 01/23/15 Page 1 of 3 PCN NO. HC151402 Page 2 of 3 Samples: Available Will be available (mm/dd/yr): Not Applicable Quantifiable Impact on Quality & Reliability: System level ESD Robustness will be improved. Forecasted Availability Date: 30 days after PPAP availability Target Backlog Conversion Date: 90 days after PPAP availability *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Automotive GmbH Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany QF-8004 Rev. 15 01/23/15 PCN NO. HC151402 Page 3 of 3 Appendix ATA664151 Package Comparison ATMEL Automotive GmbH Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany QF-8004 Rev. 15 01/23/15