View detail for HC141902

Product Change Notification
PCN Number: HC141902
Notification Date: May 23, 2014
Title: Replacement of Existing Datasheet 9337B-AUTO-02/14 by the New Version 9337CAUTO-05/14
Product Identification:
ATA663254-FAQW
Reason for Change:
Material / Composition
Manufacturing Location
Processing / Manufacturing
Quality / Reliability
Design / Firmware
Logistics
Datasheet
Other:
Change Description:
The datasheet of the ATA663254 has been updated.
- New variant ATA663231 is added into the datasheet.
PPAP is updated accordingly. There is no change in form, fit and function of ATA663254.
Datasheet version:
Old: 9337B-AUTO-02/14
New: 9337C-AUTO-05/14
Identification Method to Distinguish Change:
Not applicable.
Qualification
Data:
Available
Will be available
(mm/dd/yr):
Not Applicable
Samples:
Available
Will be available
(mm/dd/yr):
Not Applicable
Quantifiable Impact on Quality & Reliability:
Not applicable.
Proposed First Ship Date*: Not applicable.
*The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is
determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations
in supply and demand. Consequently, although customers should be prepared to receive changed product on this date,
Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in
pre-changed product being shipped to customers after this forecasted date.
Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional
information (when replying via e-mail please include the PCN number in subject line).
ATMEL Automotive GmbH
QF-8004 Rev. 13
07/23/2013
Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN
Germany
Page 1 of 2
PCN NO. HC141902
Page 2 of 2
Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel
assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and
Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or
implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or noninfringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a
product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in
significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without
notice.
CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of
this PCN. Please complete and email to [email protected] and the Atmel Contact listed
above. In your acknowledgement, you can grant approval or request additional information.
Atmel will deem this change accepted unless specific conditions of acceptance are
provided in writing within 30 days from the date of this notice.
To be completed by customer:
Approved
Rejected (Please state reason for rejection):
Company:
Name:
Title:
Date:
Email
Address:
Location:
Comments:
ATMEL Automotive GmbH
QF-8004 Rev. 13
07/23/2013
Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN
Germany