Product Change Notification PCN Number: HC134701 Notification Date: November 27, 2013 Title: Centering of the Reference Voltage 4 Output (Parameter 1.4 in the datasheet) Product Identification: ATR4251C-TKQY ATR4251C-PFQY ATR4251C-PFPY CE2303C-TKQY CE2303C-PFQY CE2303C-PFPY Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: The Reference voltage 4 output (parameter 1.4 in the datasheet) is specified from a minimum of 6.0 V to a maximum of 6.7V with a typical value of 6.35V whereas this parameter is specified from 6.0 V to a maximum of 6.5V with a typical value of 6.25V for TSG previous versions ATR4251 & CE2303. Identification Method to Distinguish Change: N/A Qualification Data: Available Will be available (mm/dd/yr): Not Applicable Samples: Available Will be available (mm/dd/yr): Not Applicable Quantifiable Impact on Quality & Reliability: No impact on the IC operation, Quality and Reliability Proposed First Ship Date*: TSG product version: Running st Proposed First Ship Date of Colorado Springs product version: October 1 2013 *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). ATMEL Automotive GmbH QF-8004 Rev. 13 07/23/2013 Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany Page 1 of 2 PCN NO. HC134701 Page 2 of 2 Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or noninfringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Automotive GmbH QF-8004 Rev. 13 07/23/2013 Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany