Product Change Notification ® Product Change Notification Number: RC085101 Date: January 8, 2009 Title: Package Marking Change Product Identification: Smart card reader products See Attachment A for the list of impacted products. Reason for Change: Design Manufacturing Location Processing Quality/Reliability Logistics Material Change Description: Stop package backside marking for process standardization. Key marking information are already on the Top side marking. Identification Method to Distinguish Change: Starting Date Code 0904 Qualification Data: Samples: available will be available in WW___ not applicable available will be available in WW___ not applicable Quantifiable Impact on Quality & Reliability: None. There is no impact on the traceability. Proposed First Ship Date*: March 27, 2009 *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: [email protected] Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. All correspondence must be sent to the Atmel Contact e-mail address listed above. Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. ATMEL Rousset • Zone industrielle 13106 ROUSSET Cedex • France CPQ-2005 Rev. 23 Page 1 of 2 PCN No. RC085101 Page 2 of 2 Attachment A Part Number Part Number AT83C26-ALTUL AT83C5127DVV-ALTUM AT83C26-ALRUL AT83C5127DWQ-ALTUM AT83C24B-SSUM AT83C5127DVS-ALTUM AT83C24B-SSUL AT83C5123DWA-ALTUM AT83C24B-SRUL AT83C27OK100-ALTUM AT83C24NDS-SSUL AT83C5127DWR-ALTUM AT83C24B-Z1RIM AT83C5127DXW-ALTUM AT89C5121-YSUL AT83C5127XXX-RATUM AT83C21GC144-YRUL AT83C5127DYH-ALTUM AT83C5121DWT-YSUL AT85C5122DVB-ALTUM AT83C5121EAM-YSUL AT83C5127DYX-ALTUM AT83C5127DYX-ALTUM AT83R25OK102-ALTUM AT83C5123DVA-ALTUM AT83R22OK500-ALTUM AT83C23OK203-ALTUM AT83R22OK106-ALTUM AT83C23OK203-ALRUM AT83R22OK510-ALTUM AT83C23OK600-ALTUM AT83R5122EAT-ALTUM ATMEL Rousset • Zone industrielle 13106 ROUSSET Cedex • France CPQ-2005 Rev. 23