Product Overview NLSX4014: 4-Bit 100 Mbps Configurable Dual-Supply Level Translator For complete documentation, see the data sheet Product Description The NLSX4014 is a 4 bit configurable dual supply bidirectional level translator without a direction control pin. The I/O VCC- and I/O VL ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC - 0.4) V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and vice versa. Both I/O ports are auto sensing; thus, no direction pin is required. The Output Enable (EN) input, when Low, disables both I/O ports by putting them in 3 state. This significantly reduces the supply currents from both VCC and VL. The EN signal is designed to track VL. Features • • • • • • • Wide HighSide VCC Operating Range: 1.3 V to 4.5 V Wide LowSide VL Operating Range: 0.9 V to (VCC - 0.4) V HighSpeed with 100 Mb/s Guaranteed Date Rate for VL > 1.6 V Low Bit - to - Bit Skew Overvoltage Tolerant Enable and I/O Pins Non - preferential Powerup Sequencing Small packaging: 1.7 mm x 2.0 mm UQFN12 Applications End Products • Hand held Portable • Mobile Phones, PDAs, Other Portable Devices Part Electrical Specifications Product Compliance Status Channels Input Level VCC Min (V) VCC Max (V) tpd Max (ns) IO Max (mA) Package Type NLSX4014DR2G Pb-free Active 4 CMOS 1.3 4.5 17 0.02 SOIC-14 Active 4 CMOS 1.3 4.5 17 0.02 TSSOP-14 Active 4 CMOS 1.3 4.5 17 0.02 UQFN-12 Active 4 CMOS 1.3 4.5 17 0.02 UQFN-12 Halide free NLSX4014DTR2G Pb-free Halide free NLSX4014MUTAG Pb-free Halide free NLVSX4014MUTAG AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016