Subject: Motorola PRODUCT AND PROCESS CHANGE NOTIFICATION 4565 TITLE: ADDITIONAL ASSMBLY SITE QUAL. OF LITE ON TO INCREASE ZENER CAPACITY EFFECTIVE DATE: 30-JUL-99 AFFECTED CHANGE CATEGORIES Subcontractor Assembly Site AFFECTED PRODUCT DIVISIONS POWER PRODUCTS DIV ADDITIONAL RELIABILITY DATA: None Ref: SAMPLES: No Ref: For any questions concerning this notification: REFERENCE: EILEEN KIM PHONE: 602-244-7743 DISCLAIMER: MOTOROLA WILL CONSIDER THIS CHANGE APPROVED UNLESS SPECIFIC CONDITIONS OF ACCEPTANCE ARE PROVIDED IN WRITING WITHIN 30 DAYS OF RECEIPT OF THIS NOTICE. TO DO SO, CONTACT YOUR LOCAL MOTOROLA SALES OFFICE. GPCN FORMAT: CUSTOMER DO NOT REPLY TO THIS MESSAGE. Motorola Page:2 Semiconductor Products Sector ********************************************************************** PRODUCT AND PROCESS CHANGE NOTIFICATION ********************************************************************** ISSUE DATE: 21-Apr-1999 NOTIFICATION #:4565 EFFECTIVE DATE: 30-Jul- 1999 ISSUING DIVISION:PHX-OSPD DESCRIPTION AND PURPOSE ----------------------The purpose of this PCN is to qualify the subcontractor, Lite On, in Taiwan to increase assembly capacity to manufacture Zener SMB devices including unidirectional TVS and regulators. This change will qualify an additional assembly site for the purpose of adding capacity. QUALIFICATION PLAN -----------------N/A RELIABILITY DATA SUMMARY -----------------------ENVIRONMENTAL AND LIFE TEST ACCEPTANCE CRITERIA PARAMETER CONDITIONS Ir Vr=75 Volts VZ Vf IzT=1.0mA If=200mA FAILURE DEFINITION INITIAL- ENDPOINTS DELTA LIMITS MIN MAX UNITS MAX BASE - 5 uA +20% Spec width =+1uA 83.3 - 92.1 1.5 volt volt +_20% Initial +_20% Specwidth (+_3V) ENVIRONMENTAL TEST SUMMARY SAMPLE TESTS CONDITIONS INTERVAL SIZE Temp cyc. Ta=65/+150 500 cyc 252 degrees C, Air ------to Air, Dwell 1000 cyc greater than or equal to 15 min, transfer less than or equal to 10 mins REJECTS CAT LIM 0 0 0 0 DEL 0 0 Autoclave Ta=121 96 hrs. 252 0 0 0 degrees C, RH=100%,P=15 psig, Clean and Bake 1 hr. @ 100 degrees C prior to measurements Physical Case outline Dimensions Solder Heat Ta=+260 degrees C, Dwell=10 sec Solder- Mil-Std-750, ability Method 2026, Steam Age=8 hrs External Visual N/M 30 End pts 30 bd mt for elec. N/M 30 0 0 0 0 0 0 0 0 0 0 0 0 0 Greater than N/M 150 0 or equal to Mil-Std-750, Method 2071 Die Bond No temp cycle (Die Shear) N/M 5 0 Motorola Page:3 Semiconductor Products Sector ********************************************************************** PRODUCT AND PROCESS CHANGE NOTIFICATION ********************************************************************** ISSUE DATE: 21-Apr-1999 NOTIFICATION #:4565 EFFECTIVE DATE: 30-Jul- 1999 ISSUING DIVISION:PHX-OSPD LIFE TEST SUMMARY TESTS TEST CONDITIONS ENVIR. BIAS HTRB Ta=+150 degC IOL Ton=2 min, Toff=2 min, Ta=+25degC 75 vlts INTERVAL SAMPLE REJECTS SIZE CAT LIM DEL 504 hrs 1008 hrs DeltaTj= 7500 cyc 100degC, 10000 cyc Tj greater than or = to 150degC, Vz =99V 252 0 0 0 0 0 0 252 0 0 0 0 0 0 Highly Accel. Stress Test Ta=+130degC, RH=85%, P= 18.8 psig 40 vlts 48 hrs 96 hrs 252 0 0 0 0 0 0 High Humid. HTRB Ta=+85degC, RH=85% 75 vlts 504 hrs 1008 hrs 252 0 0 0 0 0 0 60 N N N 252 0 0 0 ESD HTSL Human Body Degradtn. N/M Model & or compliance Machine Models 1 & 2 Ta=+150degC None 1008 hrs ELECTRICAL CHARACTERISTIC SUMMARY --------------------------------Electrical characterization at room, 150 degrees C and -55 degreees C, will be done on three assembly lots of ISMB75AT3 from Lite On and will be compared to one control lot from SBN Site 1. Additionally, surge-to-destruct test will be done and compared to SBN assembled devices using P6SMB200AT3 and P6SMB160AT3. Estimated date of completion is 5/22/99. CHANGED PART IDENTIFICATION --------------------------Line 1 of the device marking will consist of the Motorola symbol, followed by a 3 digit date code. Line 2 of the device marking is reserved for each device as documented on 48A. Line 3 of device marking will be reserved for the site code. If assembled in Motorola SBN factory, line 3 will not be required. If assembled in Lite On, the site code will be ZP. Motorola Page:4 Semiconductor Products Sector ********************************************************************** PRODUCT AND PROCESS CHANGE NOTIFICATION ********************************************************************** ISSUE DATE: 21-Apr-1999 NOTIFICATION #:4565 EFFECTIVE DATE: 30-Jul- 1999 ISSUING DIVISION:PHX-OSPD FILE FORMAT: ASCII TEXT FONT - Courier SIZE - 12 Point LINE - 70 characters/line PAGE - 55 lines/page PAGEBREAK CHARACTER - ^L (Control L) AFFECTED DEVICE LIST (WITHOUT SPECIALS) --------------------------------------1SMB100AT3 , 1SMB10AT3 , 1SMB110AT3 1SMB120AT3 , 1SMB12AT3 , 1SMB130AT3 1SMB14AT3 , 1SMB150AT3 , 1SMB15AT3 1SMB170AT3 , 1SMB17AT3 , 1SMB18AT3 1SMB22AT3 , 1SMB24AT3 , 1SMB26AT3 1SMB30AT3 , 1SMB33AT3 , 1SMB36AT3 1SMB43AT3 , 1SMB45AT3 , 1SMB48AT3 1SMB51AT3 , 1SMB54AT3 , 1SMB58AT3 1SMB5914BT3 , 1SMB5915BT3 , 1SMB5916BT3 1SMB5918BT3 , 1SMB5919AT3 , 1SMB5919BT3 1SMB5921BT3 , 1SMB5922BT3 , 1SMB5923BT3 1SMB5925BT3 , 1SMB5926BT3 , 1SMB5927BT3 1SMB5929BT3 , 1SMB5930BT3 , 1SMB5931BT3 1SMB5933BT3 , 1SMB5934BT3 , 1SMB5935BT3 1SMB5937BT3 , 1SMB5938BT3 , 1SMB5939BT3 1SMB5941BT3 , 1SMB5942BT3 , 1SMB5943BT3 1SMB5945BT3 , 1SMB5946BT3 , 1SMB5947BT3 1SMB5949BT3 , 1SMB5950BT3 , 1SMB5951BT3 1SMB5953BT3 , 1SMB5954BT3 , 1SMB5955BT3 1SMB6.0AT3 , 1SMB6.5AT3 , 1SMB60AT3 1SMB7.0AT3 , 1SMB7.5AT3 , 1SMB70AT3 1SMB8.0AT3 , 1SMB8.5AT3 , 1SMB85AT3 1SMB90AT3 , P6SMB100AT3 , P6SMB10AT3 P6SMB11AT3 , P6SMB120AT3 , P6SMB12AT3 P6SMB13AT3 , P6SMB150AT3 , P6SMB15AT3 P6SMB16AT3 , P6SMB180AT3 , P6SMB18AT3 P6SMB20AT3 , P6SMB22AT3 , P6SMB24AT3 P6SMB30AT3 , P6SMB33AT3 , P6SMB36AT3 P6SMB43AT3 , P6SMB47AT3 , P6SMB51AT3 P6SMB6.8AT3 , P6SMB62AT3 , P6SMB68AT3 P6SMB75AT3 , P6SMB8.2AT3 , P6SMB82AT3 P6SMB91AT3 , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 1SMB11AT3 1SMB13AT3 1SMB16AT3 1SMB20AT3 1SMB28AT3 1SMB40AT3 1SMB5.0AT3 1SMB5913BT3 1SMB5917BT3 1SMB5920BT3 1SMB5924BT3 1SMB5928BT3 1SMB5932BT3 1SMB5936BT3 1SMB5940BT3 1SMB5944BT3 1SMB5948BT3 1SMB5952BT3 1SMB5956BT3 1SMB64AT3 1SMB75AT3 1SMB9.0AT3 P6SMB110AT3 P6SMB130AT3 P6SMB160AT3 P6SMB200AT3 P6SMB27AT3 P6SMB39AT3 P6SMB56AT3 P6SMB7.5AT3 P6SMB9.1AT3