Product Overview 2N6075A: Sensitive Gate Triac For complete documentation, see the data sheet Product Description This triac is designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. Features • Sensitive Gate Triggering Uniquely Compatible for Direct Couplingto TTL, HTL, CMOS and Operational Amplifier Integrated CircuitLogic Functions • Gate Triggering 4 Mode - 2N6071A,B, 2N6073A,B, 2N6075A,B • Blocking Voltages to 600 Volts • All Diffused and Glass Passivated Junctions for Greater ParameterUniformity and Stability • Small, Rugged, Thermopad Construction for Low ThermalResistance, High Heat Dissipation and Durability • Device Marking: Device Type, e.g., 2N6071A, Date Code • These devices are available in Pb-free package(s). Specifications herein apply to both standard and Pb-free devices. Please see our website at www.onsemi.com for specific Pb-free orderable part numbers, or contact your local ON Semiconductor sales office or representative. Part Electrical Specifications Product Compliance Status IT(RMS) Max (A) VDRM Min (V) ITSM Max (A) IGT Max (mA) Package Type 2N6075AG Pb-free Active 4 600 30 5 TO-225-3 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016