Photoelectric sensors FLDK 110C1003/S42 Copy counters dimension drawing 30 50 45 LED DIP switches Laser beam 56 98 M16 x 0,75 65 ° 6 24 M6 ø 6 110 13 15 12 general data photo measuring distance Sd 0 ... 60 mm optimum operating distance 40 mm counting rate < 600000 copies/h object speed 5 m/sec object cycle distance > 1 mm sensitivity single sheet/edge thickness 0,2 mm sync. input no measuring point visible red laser line 2 mm light source pulsed red laser diode wave length 670 nm laser class 2 edge indicator LED yellow power on indication LED green false pulse suppression on/off switchable sensitivity adjustment high/low switchable connection diagram (3) (1) electrical data 200mA 10 Ω polyfuse voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 180 mA (2) output circuit opto isolated (6) output pulse length 5 / 10 / 15 / 20 ms selectable short circuit protection yes reverse polarity protection yes +VS output output ground laser warning mechanical data LASER RADIATION DO NOT STARE INTO BEAM width / diameter 30 mm type rectangular housing material PA 6 connector base (main connector) DIN 45322, 6 pin front (optics) glass Wavelength: 620...680nm Max. av. Output: < 1mW IEC 60825-1, Ed. 2, 2007 CLASS 2 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 ambient conditions operating temperature 0 ... +50 °C protection class IP 54 FLDK 110C1003/S42 www.baumer.com 11/11/2015