SOT762-1 Standard product orientation 12NC ending 115 Rev. 03 — 28 July 2011 Packing information 1. Packing method Fig. 1 Package version 12NC ending Reel dimensions d x w (mm) SPQ/PQ (pcs) Reels per box Outer box dimensions l x w x h (mm) SOT762-1 115 180 x 12 2500 1 187 x 187 x 24 SOT762-1 NXP Semiconductors Standard product orientation 12NC ending 115 2. Product orientation Fig. 2 3. Carrier tape dimensions Fig. 3 A0 (mm) B0 (mm) K0 (mm) T (mm) P1 (mm) W (mm) 2.80 3.30 1.1 - 4.0 12 SOT762-1_3 © NXP B.V. 2006. All rights reserved. Rev. 03 — 28 July 2011 2 of 4 SOT762-1 NXP Semiconductors Standard product orientation 12NC ending 115 4. Carrier tape dimensions Fig. 4 Package version 12NC ending Reel dimensions d x w (mm) SPQ/PQ (pcs) SOT762-1 115 180 x 12 2500 SOT762-1_3 © NXP B.V. 2006. All rights reserved. Rev. 03 — 28 July 2011 3 of 4 SOT762-1 NXP Semiconductors Standard product orientation 12NC ending 115 5. Barcode label box and reel information Fig. 5 Label dimensions l x w (mm) 100 x 75 Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, email to: [email protected] Date of release: 28 July 2011 Document identifier: SOT762-1_3