DLO Suppression Chokes www.schurter.com/PG81_82 Linear Choke, open version, without socket Description Applications -Linear choke -Wire leads -Open version without socket and chassis -Smoothing RFI suppression choke -RFI suppression choke -Chopper amplifiers -DC drives and stepper motor controls -Switching power supplies Standards -EN 60938 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data ␣ Rated Current Rated inductance Power Operating Frequency Terminal Type Weight to 600 VDC 0.45 - 7 A @ Ta 70 °C 0.02 - 5 mH, Tol. ±15% up to 20 kHz Wire leads 10 - 12 g Isolation Voltage Climatic Category Allowable Operation Temp. 2 kV eff., winding to ambient 40/125/21 acc. to IEC 60068-1 -40 °C to 125 °C Dimension a b c Ød Dimensions: see table of variants EMC Products 1 DLO Suppression Chokes www.schurter.com/PG81_82 Diagrams Application in DC-DC Converter DLH/DLN/DLO DS/DSO DLH/DLN/DLO 1) 2) 1) DC-Input unregulated 2) DC-Output regulated Derating Curves Inductance variation as function of the magnetizing current All Variants In [A] Ln [mH] Rcu [mΩ] fRES [MHz] Inductance drop max [%] A [mm] B [mm] C [mm] D [mm] Weight [g] Packing unit [pcs.] Order Number 0.45 5 3000 0.3 20 20 mm 15 mm 10 mm 10 g 200 DLO1-24-0008 0.6 3 1550 0.4 20 20 mm 36 mm 10 mm 11 g 200 DLO1-24-0007 1.0 1 600 0.8 20 20 mm 15 mm 10 mm 10 g 200 DLO1-24-0006 1.5 0.5 280 1.3 20 20 mm 15 mm 10 mm 10 g 200 DLO1-24-0005 1.8 0.3 178 2 20 20 mm 15 mm 10 mm 10 g 200 DLO1-24-0004 3 0.1 70 8.2 20 20 mm 36 mm 10 mm 10 g 200 DLO1-24-0003 4.5 0.05 26 8.4 20 20 mm 15 mm 10 mm 0.9 mm 11 g 200 DLO1-24-0002 7 0.02 12 20.2 20 20 mm 36 mm 10 mm 1.2 mm 12 g 150 DLO1-24-0001 Rcu at Tu 20°C Inductance drop at In Derating at Tu >70°C: I = Inx ((125-Tu)/55)0.5 11.06.2016 Availability for all products can be searched real-time:http://www.schurter.com/Stock-Check/Stock-Check-SCHURTER 2 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.