Package Description Package Code Lead Finish J‐STD‐609 Category Assembly Location Atmel Corporation ‐ Package Material Declaration Datasheet 208‐Lead, 28 x 28 x 1.4 mm Body, 0.50 mm Lead Pitch, Low‐Profile Plastic Quad Flat Package (LQFP) R‐LQ208 GPC AFT Matte Tin (Sn) RoHS Compliant Yes e3 Green Compliant Yes Amkor Philippines REACH Compliant Yes Package Material Declaration Material Leadframe Sub‐Total Integrated Circuit Sub‐Total Die Attach Sub‐Total Die Pad Plating Sub‐Total Bond Wire Sub‐Total Encapsulation Substance Copper (Cu) Iron (Fe) Phosphorous (P) Zinc (Zn) CAS # 7440‐50‐8 7439‐89‐6 7723‐14‐0 7440‐66‐6 Silicon (Si) 7440‐21‐3 Silver (Ag) Bisphenol F Diglycidyl Ether 1,4‐Bis(2,3‐Epoxypropoxy)Butane 2,6‐Diglycidyl Phenyl Allyl Ether Oligomer Dihydro‐3‐(Tetrapropenyl)Furan‐2,5‐Dione Oxirane, 2‐Dodecyl‐ Methylhexahydrophthalic Anhydride 7440‐22‐4 39817‐09‐9 2425‐79‐8 Proprietary 26544‐38‐7 3234‐28‐4 19438‐60‐9 Silver (Ag) 7440‐22‐4 Gold (Au) 7440‐57‐5 Silica (Amorphous) A Epoxy Resin Silica (Amorphous) B Phenol Resin Carbon Black 60676‐86‐0 Proprietary 7631‐86‐9 Proprietary 1333‐86‐4 Tin (Sn) 7440‐31‐5 Sub‐Total Terminal Plating Sub‐Total Total Weight (mg) 548.600 13.518 0.563 0.563 563.244 17.137 17.137 0.871 0.071 0.060 0.060 0.054 0.054 0.032 1.204 1.323 1.323 3.133 3.133 1607.621 182.308 182.308 82.867 16.573 2071.677 20.306 20.306 2678.024 Homogeneous Material Percentage ppm 97.4 974000 2.4 24000 0.1 1000 0.1 1000 100.0 1000000 100.0 1000000 100.0 1000000 72.4 724000 5.9 59000 5.0 50000 5.0 50000 4.5 45000 4.5 45000 2.7 27000 100.0 1000000 100.0 1000000 100.0 1000000 100.0 1000000 100.0 1000000 77.6 776000 8.8 88000 8.8 88000 4.0 40000 0.8 8000 100.0 1000000 100.0 1000000 100.0 1000000 Package Percentage ppm 20.49 204853 0.50 5048 0.02 210 0.02 210 21.03 210321 0.64 6399 0.64 6399 0.03 325 0.00 27 0.00 22 0.00 22 0.00 20 0.00 20 0.00 12 0.04 449 0.05 494 0.05 494 0.12 1170 0.12 1170 60.03 600301 6.81 68075 6.81 68075 3.09 30943 0.62 6189 77.36 773584 0.76 7582 0.76 7582 100.00 1000000 Package Material Declaration Certificate Atmel Corporation certifies that the material content information provided above is representative and accurate as of the date of this declaration. Atmel Corporation products designated as "RoHS Compliant" or "Green" (defined below) do not exceed the threshold limits of the European Union Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Name / Title: William B. Dupey III / Quality Engineer & Chemist Date: January 22, 2016 RoHS Compliant: Atmel Corporation defines "RoHS Compliant" to mean maximum concentration value of 0.1% (1000 ppm) for Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Polybrominated Biphenyl (PBB), Polybrominated Diphenyl Ether (PBDE) , Bis(2‐ethylhexyl) Phthalate (DEHP), Butyl Benzyl Phthalate (BBP), Dibutyl Phthalate (DBP), Diisobutyl Phthalate (DIBP) and maximum concentration value of 0.01% (100 ppm) for Cadmium (Cd) in any homogeneous material. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.