SCHURTER AG CH-6002 Luzern www.schurter.com PRODUCT CONTENT SHEET UMBRELLA SPECIFICATION 4796 Appliance inlet for Cable (3x1.5mm2) SCHURTER part numbers 4796.0000 Package family Appliance Couplers 4796 Date Version See below See below Composition part Material group Materials Plastic-Parts Polymer PVC Polymer CAS Metall-Parts Average mass [weight-%] *) Sum [%] 9002-86-2 8.8 64.3 PA6 25038-54-4 55.5 Carbon C 7440-44-0 2.1 Copper Cu 7440-50-8 13.8 Manganese Mn 7439-96-5 0.3 Nickel Ni 7440-02-0 1.2 Zinc Zn 7440-66-6 8.1 Iron Fe 7439-89-6 10.2 if applicable 35.7 Sum in total: Weight range 40g Fluctuation margin N/a Traces 100 Part complies with EU RoHS directive (yes/no): Yes Part complies with China RoHS directive (yes/no): Yes or: Case sizes**) and weight range N/a *) related to package weight; weight in particular, see corresponding package weight list **) optional Not part of package family N/a SCHURTER AG Werkhofstrasse 8-12 CH-6002 Luzern, Switzerland [email protected] www.schurter.com Company Address E-mail Internet Certified Management ISO 9001 since 1990 Systems ISO 14001 since 1996 OHSAS 18001 since 2005 ISO 50001 since 2014 Important remarks: 1) 2) 3) 4) 5) Traces are product parts, substances etc. that are below a percentage of 0.1 % (1000ppm) by weight. Higher limits are accepted if the substance or material is legally regulated (see note no. 2). REACH legislation, annex XVII contains a list of legal restrictions on substances or materials and is available at http://echa.europa.eu/web/guest/addressing-chemicals-ofconcern/restrictions/list-of-restrictions Substances, materials etc. with possible harmful effects on human beings and the environment are listed. There are no risks for human beings and to the environment if products are properly used as designated. This shall not apply to risks caused during procedures for disposal etc. All statements herein are based on our present knowledge. If our products are used properly, there are no risks to human beings and/or the environment. This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data 4796 Appliance inlet for Cable creation date 2005-06-06 created by ineichwi release date 2014-05-23 released by ammannsa 0104.0187 notification no. 26090 revision b doc. page 1 of 1 Print date: 23/05/2014 09:54:00