Module no:1751248 LabelId:1751248 Operator:Phoenix 16:20:26, Donnerstag, 28. Juni 2001 MKDS 1 Pitch 3.5 or 3.81 (IEC) 2 [mm ] rigid solid Connection data 0.14-1.5 flexible I U stranded AWG [A] 0.14-1 26-16 12 [V] 160 CA Description Printed circuit screw termination blocks, 3.5 mm pitch, without housing interlocking, color: green Printed circuit screw termination blocks, 3.81 mm pitch, without housing interlocking, color: green Phoenix Contact Elektronischer Katalog No. of positions Dim. a [mm] Type Order No. Pcs. Pkt. 50 2 3.5 MKDS 1/2-3,5 17 51 24 8 3 7 MKDS 1/3-3,5 17 51 25 1 4 10.5 MKDS 1/4-3,5 17 51 26 4 5 14 MKDS 1/5-3,5 17 51 27 7 6 17.5 MKDS 1/6-3,5 17 51 28 0 7 21 MKDS 1/7-3,5 17 51 29 3 8 24.5 MKDS 1/8-3,5 17 51 30 3 9 28 MKDS 1/9-35 17 51 31 6 10 31.5 MKDS 1/10-3,5 17 51 32 9 11 35 MKDS 1/11-3,5 17 51 33 2 12 38.5 MKDS 1/12-3,5 17 51 34 5 13 42 MKDS 1/13-3,5 17 51 35 8 14 45.5 MKDS 1/14-3,5 17 51 36 1 15 49 MKDS 1/15-3,5 17 51 37 4 16 52.5 MKDS 1/16-3,5 17 51 38 7 2 3.81 MKDS 1/2-3,81 17 27 01 0 3 7.62 MKDS 1/3-3,81 17 27 02 3 4 11.43 MKDS 1/4-3,81 17 27 03 6 5 15.24 MKDS 1/5-3,81 17 27 04 9 6 19.05 MKDS 1/6-3,81 17 27 05 2 7 22.86 MKDS 1/7-3,81 17 27 06 5 8 26.67 MKDS 1/8-3,81 17 27 07 8 9 30.48 MKDS 1/9-3,81 17 27 08 1 10 34.29 MKDS 1/10-3,81 17 27 09 4 11 38.10 MKDS 1/11-3,81 17 27 10 4 12 41.91 MKDS 1/12-3,81 17 27 11 7 50 Page 1 / 3 Module no:1751248 LabelId:1751248 Operator:Phoenix 16:20:26, Donnerstag, 28. Juni 2001 Accessories (1) Screwdriver, blade: 0.4 x 2.5 x 80 mm, length: 160 mm SZS 0,4 x 2,5 (2) Marker card, with 14 pcs., 10-section marker strips, white, self-adhesive, for 140 terminal blocks SK 3,5/2,8… or SK 3,81/2,8 (see info) 12 05 03 7 10 Technical data see description Dimensions Pitch [mm] 3.5 / 3.81 Hole diameter [mm] 1.1 Pin dimensions [mm] 0.5 x 0.9 Technical data in accordance with IEC / DIN VDE – Insulation material group I Surge voltage category / contamination class –/– III / 3 III / 2 II / 2 Rated voltage [V] 160 160 320 [kV] 2.5 2.5 2.5 Rated surge voltage 2 10 / 1 2 12 / 1.5 Nominal current / cross section [A]/[mm ] Maximum load current / cross section [A]/[mm ] Connection capacity solid / stranded / conductor sizes 2 2 [mm ]/[mm ]/AWG stranded with ferrules without / with plastic collar 0.14 - 1.5 / 0.14 - 1 / 26 - 16 2 0.25 - 0.5 / 0.25 - 0.5 [mm ] 2 0.14 - 0.5 / 0.14 - 0.2 [mm] 5 [mm ] Multiple connection (2 conductors with same cross section) solid / stranded Stripping length Thread – Torque [Nm] M2 0.22 - 0.25 PA Insulation material V0 (V2)* Inflammability class acc. to UL 94 130 / 120 (125 / 100)* Temperature indices RTI/Ti Approval data (UL and CSA) Nominal voltage / current / conductor sizes UL: [V] / [A] / AWG 300 / 10 / 30-16 CSA: [V] / [A] / AWG 300 / 10 / 28-16 * MKDS 1/…-3,81 Articles printed in bold can be delivered at short notice. Products with black or gray housing available on request. Note: In order to avoid tolerances between the terminal blocks and the printed circuit board, the terminal row should be interrupted when the number of positions exceeds 30. Dimensional drawing Phoenix Contact Elektronischer Katalog Page 2 / 3 Module no:1751248 LabelId:1751248 Operator:Phoenix 16:20:26, Donnerstag, 28. Juni 2001 Drilling diagram Diagram Current carrying capacity depending on the ambient temperature MKDS 1/2 Phoenix Contact Elektronischer Katalog Page 3 / 3