SPD5615 thru SPD5623 and SPD5615SMS thru SPD5623SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1.0 AMP 200 ─ 1000 VOLTS FAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab Family/Voltage • • • • • • • • • • 5615 = 200 V 5617 = 400 V 5619 = 600 V 5621 = 800 V 5623 = 1000 V • FEATURES: Fast Recovery: 150-500 ns Maximum 4/ Single Chip Construction PIV to 1000 Volts Low Thermal Resistance Low Reverse Leakage Current Hermetically Sealed High Surge Rating Available in Axial and Surface Mount Versions 2/ TX, TXV, and S-Level Screening Available Replacement for 1N5615 thru 1N5623 Series Ultra Fast and Hyper Fast Versions available MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Rectified Forward Forward Current (Resistive Load, 60 Hz, Sine Wave) SPD5615 SPD5617 SPD5619 SPD5621 SPD5623 TA = 55°C TA = 100°C Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 100°C) Operating & Storage Temperature Thermal Resistance, Junction to Lead, L = 3/8” (Axial) Junction to End Tab (SMS) NOTES: SYMBOL VALUE UNIT VRRM VRWM VR 200 400 600 800 1000 Volts IO1 IO2 1.00 0.75 Amp IFSM 25 Amps TOP and TSTG RθJL RθJE -65 to +175 °C 38 13 °C/W Axial Leaded SMS 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0104C DOC SPD5615 thru SPD5623 and SPD5615SMS thru SPD5623SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ 5/ CHARACTERISTICS SYMBOL VALUE UNIT Maximum Instantaneous Forward Voltage Drop (IF = 3Adc, 300- 500 μs Pulse, TA = 25°C) VF 1.60 Vdc Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25°C) IR1 .5 μA Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100°C) IR2 25 μA CJ 45 35 25 20 15 pf trr 150 150 250 300 500 ns SPD5615 SPD5617 SPD5619 SPD5621 SPD5623 Junction Capacitance (VR = 12Vdc, TA = 25°C , f = 1MHz) Maximum Reverse Recovery Time SPD5615 SPD5617 SPD5619 SPD5621 SPD5623 4/ Axial Leaded Case Outline: DIMENSIONS DIM. MIN. MAX. A --- .150” B .140 .190” C .027” .033” D .95” --- Square Tab Surface Mount Case Outline: DIMENSIONS DIM. MIN. A .128” B .190” C .022” D .001” MAX. .132” .240” .028” --- NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. 5/ For information on operating curves, contact factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0104C DOC