Bulletin PD-20995 rev. F 12/02 100BGQ015 100BGQ015J 100 Amp SCHOTTKY RECTIFIER Description/ Features Major Ratings and Characteristics Characteristics 100BGQ015 Units 100 A IF(AV) Rectangular waveform @ TC The 100BGQ015 Schottky rectifier has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125° C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 91 °C 141 A 15 V 125°C TJ operation (VR < 5V) IFSM @ tp = 5 µs sine 5000 A High frequency operation VF 0.38 V 125 °C Ultra low forward voltage drop Continuous High Current operation - 55 to 125 °C IDC Maximum VRRM @100 Apk typical @TJ TJ range Optimized for OR-ing applications Guard ring for enhanced ruggedness and long term reliability PowIRtabTM package Case Styles 100BGQ015 www.irf.com 100BGQ015J 1 100BGQ015, 100BGQ015J Bulletin PD-20995 rev. F 12/02 Voltage Ratings Part number 100BGQ015 VR Max. DC Reverse Voltage (V) @ TJ = 100 °C 15 VR Max. DC Reverse Voltage (V) @ TJ = 125 °C 5 Absolute Maximum Ratings Parameters 100BGQ Units IF(AV) Max. Average Forward Current IF(RMS) RMS Forward Current IFSM Max. Peak One Cycle Non-Repetitive 100 A 141 A 5000 Surge Current 1000 Conditions 50% duty cycle @ TC = 91°C, rectangular wave form TC = 88°C 5µs Sine or 3µs Rect. pulse A EAS Non-RepetitiveAvalancheEnergy 9 mJ IAR Repetitive Avalanche Current 2 A 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 2 Amps, L = 4.5 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 3 x VR typical Electrical Specifications Parameters 100BGQ Units Typ. VFM IRM Forward Voltage Drop (1) (2) Reverse Leakage Current (1) 0.34 0.37 V @ 50A 0.42 0.46 V @ 100A 0.26 0.29 V @ 50A 0.38 0.42 V @ 100A 7 TJ = 25 °C TJ = 125 °C 18 mA TJ = 25 °C 580 870 mA TJ = 100 °C 480 700 mA TJ = 100 °CVR = 12V 1 VF(TO) Threshold Voltage Conditions Max. 1.2 VR = rated VR A TJ = 125 °CVR = 5V 0.155 V TJ = TJ max. mΩ rt Forward Slope Resistance 2.45 CT Max. Junction Capacitance 3800 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 3.5 nH Measured from tab to mounting plane 10000 V/ µs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% (2) VFM = VF(TO) + rt x IF Thermal-Mechanical Specifications Parameters 100BGQ Units Conditions TJ Max. Junction Temperature Range -55 to 125 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction to Case 0.50 °C/W DC operation RthCS Typical Thermal Resistance,Case to 0.20 °C/W Mounting surface , smooth and greased Heatsink wt Approximate Weight T Mounting Torque Case Style 2 5 (0.18) g (oz.) Min. 1.2 (10) Max. 2.4 (20) N*m (Ibf-in) PowIRtabTM www.irf.com 100BGQ015, 100BGQ015J Bulletin PD-20995 rev. F 12/02 1000 1000 Reverse Current - I R (mA) 100 75°C 100 50°C 10 25°C T J = 125°C 1 T J = 100°C 0 2 4 6 8 10 12 14 16 Reverse Voltage - VR (V) T J = 25°C Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (pF) 10000 10 T J = 25°C Junction Capacitance - C T Instantaneous Forward Current - I F (A) T J = 100°C 1 0 0.25 0.5 0.75 1 1.25 1000 1.5 0 2 Forward Voltage Drop - V FM (V) 4 6 8 10 12 14 16 Reverse Voltage - VR (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance Z thJC (°C/W) 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM Single Pulse (Thermal Resistance) Notes: t1 t2 1. Duty factor D = t 1/ t 2 2. Peak TJ = PDM x Z thJC+ T C 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 100BGQ015, 100BGQ015J Bulletin PD-20995 rev. F 12/02 100 120 110 Average Power Loss - (Watts) Allowable Case Temperature - (°C) 130 DC 100 90 Square wave (D = 0.50) 5 V applied 80 70 60 50 0 20 40 80 60 60 80 RMS Limit DC 40 20 0 see note (3) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 0 100 120 140 160 40 60 80 100 120 140 160 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) 20 Fig. 6 - Forward Power Loss Characteristics 10000 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 100BGQ015, 100BGQ015J Bulletin PD-20995 rev. F 12/02 Outline Table Case Style PowIRtabTM Dimensions in millimeters and (inches) Case Style PowIRtabTM "J" version Dimensions in millimeters and (inches) www.irf.com 5 100BGQ015, 100BGQ015J Bulletin PD-20995 rev. F 12/02 Ordering Information Table Device Code 100 BGQ 015 J 2 4 1 3 1 - 2 - Essential Part Number 3 - Voltage code: Code = VRRM 4 - none = PowIRtabTM standard 6 Current Rating J = Short Lead Version Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/02 6 www.irf.com