Bulletin PD-20786 rev. A 09/06
30CPQ080PbF
30CPQ100PbF
SCHOTTKY RECTIFIER
30 Amp
IF(AV) = 30Amp
VR = 80 -100V
Major Ratings and Characteristics
Description/ Features
Characteristics
Values
Units
IF(AV) Rectangular
waveform
30
A
80 -100
V
VRRM
The 30CPQ...PbF center tap Schottky rectifier has been
optimized for low reverse leakage at high temperature. The
proprietary barrier technology allows for reliable operation up
to 175° C junction temperature. Typical applications are in
switching power supplies, converters, free-wheeling diodes,
and reverse battery protection.
175° C TJ operation
IFSM
@ tp = 5 μs sine
920
A
Center tap TO-247 package
VF
@ 15 Apk, TJ=125°C
0.67
V
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
- 55 to 175
°C
(per leg)
TJ
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Lead-Free ("PbF" suffix)
Case Styles
30CPQ...PbF
Base
Common
Cathode
2
1
Anode
1
3
2
Anode
2
Common
Cathode
TO-247AC
www.irf.com
1
30CPQ080PbF, 30CPQ100PbF
Bulletin PD-20786 rev. A 09/06
Voltage Ratings
Part number
VR
30CPQ080PbF
30CPQ100PbF
80
100
Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Absolute Maximum Ratings
Parameters
30CPQ... Units
IF(AV) Max. Average Forward Current
30
A
Conditions
50% duty cycle @ TC = 140°C, rectangular wave form
* See Fig. 5
IFSM
Max. Peak One Cycle Non-Repetitive
920
A
Surge Current (Per Leg) * See Fig. 7
240
EAS
Non-Repetitive Avalanche Energy
(Per Leg)
7.50
mJ
IAR
Repetitive Avalanche Current
(Per Leg)
0.50
A
Following any rated
load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
5μs Sine or 3μs Rect. pulse
TJ = 25 °C, IAS = 0.50 Amps, L = 60 mH
Current decaying linearly to zero in 1 μsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM
IRM
30CPQ... Units
Max. Forward Voltage Drop
(Per Leg) * See Fig. 1
(1)
Max. Reverse Leakage Current
(Per Leg) * See Fig. 2
(1)
Conditions
0.86
1.05
0.67
V
V
V
@ 15A
@ 30A
@ 15A
0.81
V
@ 30A
0.55
mA
TJ = 25 °C
7
mA
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
VR = rated VR
CT
Max. Junction Capacitance (Per Leg)
500
pF
VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LS
Typical Series Inductance (Per Leg)
7.5
nH
Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change
10000
V/ μs (Rated VR)
(1) Pulse Width < 300μs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
30CPQ... Units
TJ
Max. Junction Temperature Range
-55 to 175
Tstg
Max. Storage Temperature Range
-55 to 175
Conditions
°C
°C
RthJC Max. Thermal Resistance Junction
to Case (Per Leg)
2.20
°C/W DC operation
RthJC Max. Thermal Resistance Junction
to Case (Per Package)
1.10
°C/W DC operation
RthCS Typical Thermal Resistance, Case
to Heatsink
0.24
°C/W Mounting surface , smooth and greased
wt
Approximate Weight
T
Mounting Torque
Case Style
Device Marking
6 (0.21)
Min.
6 (5)
Max.
12 (10)
* See Fig. 4
g (oz.)
Kg-cm Non-lubricated threads
(Ibf-in)
TO-247AC(TO-3P) JEDEC
30CPQ080
30CPQ100
2
www.irf.com
30CPQ080PbF, 30CPQ100PbF
Bulletin PD-20786 rev. A 09/06
1000
ReverseCurrent - I (mA)
R
100
150°C
10
125°C
1
100°C
.1
75°C
50°C
.01
25°C
.001
.0001
0
40
1
1
1.5
100
1000
T = 25°C
J
.5
80
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
T =125°C
J
.1
0
60
ReverseVoltage- VR(V)
T =175°C
J
10
20
JunctionCapacitance- C (pF)
T
InstantaneousForwardCurrent - I (A)
F
100
T =175°C
J
2
T =25°C
J
100
0
2.5
20
ForwardVoltageDrop- V (V)
FM
40
60
80
100
ReverseVoltage- VR(V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage (Per Leg)
Fig. 1 - Max. Forward Voltage Drop Characteristics
(Per Leg)
Thermal Impedance- ZthJC (°C/W
)
10
1
.1
D=0.50
D=0.33
D=0.25
D=0.17
P
DM
t
1
t2
D=0.08
.01
.001
.00001
Notes:
1. Dutyfactor D= t / t
1 2
SinglePulse
(Thermal Resistance)
.0001
.001
.01
2. PeakT =P xZ
+T
J DM thJC C
.1
1
10
100
t1, Rectangular PulseDuration(Seconds)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
www.irf.com
3
30CPQ080PbF, 30CPQ100PbF
Bulletin PD-20786 rev. A 09/06
14
RthJC (DC) =2.20°C/W
175
AveragePower Loss- (Watts)
AllowableCaseTemperature- (°C)
180
170
165
DC
160
155
150
145
0 2 4 6 8 10 12 14 16 18 20 22
D=0.08
12 D=0.17
D=0.25
D=0.33
10
D=0.50
8
DC
6 RMSLimit
4
2
0
0 2 4 6 8 10 12 14 16 18 20 22
AverageForwardCurrent - I
(A)
F(AV)
AverageForwardCurrent - IF(AV) (A)
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
Non-Repetitive Surge Current - I
FSM
(A)
1000
At Any Rated Load Condition
And With Rated VRRM Applied
Following Surge
100
10
100
1000
10000
Square Wave Pulse Duration - t p (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
L
DUT
IRFP460
Rg = 25 ohm
CURRENT
MONITOR
HIGH-SPEED
SWITCH
FREE-WHEEL
DIODE
+
Vd = 25 Volt
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
4
www.irf.com
30CPQ080PbF, 30CPQ100PbF
Bulletin PD-20786 rev. A 09/06
Outline Table
Conform to JEDEC outline TO-247AC (TO-3P)
Dimensions in millimeters and (inches)
Marking Information
EXAMPLE: THIS IS A 30CPQ100
WITH ASSEMBLY
LOT CODE 5657
ASSEMBLED ON WW 35, 2000
IN ASSEMBLY LINE "H"
www.irf.com
INTERNATIONAL
RECTIFIER
LOGO
PART NUMBER
30CPQ100
P035H
56
ASSEMBLY
LOT CODE
57
DATE CODE
P = LEAD-FREE
YEAR 0 = 2000
WEEK 35
LINE H
5
30CPQ080PbF, 30CPQ100PbF
Bulletin PD-20786 rev. A 09/06
Ordering Information Table
Device Code
30
C
P
Q
1
2
3
4
100 PbF
5
6
1
-
Current Rating
2
-
Circuit Configuration
3
-
4
-
Schottky "Q" Series
5
-
Voltage Code
6
-
y none = Standard Production
C = Common Cathode
Package
P = TO-247
080 = 80V
100 = 100V
y PbF = Lead-Free
Tube Standard Pack Quantity : 25 pieces
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 09/06
6
www.irf.com