M3R Series 9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator M3R Series 9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator Pin Connections Pin Connections NOTE: A capacitor of value 0.01 µF or greater between Vdd and Ground is recommended. NOTE: A capacitor of value 0.01 mF or greater between Vdd and Ground is recommended. 1. See load circuit diagram #2 on page 116. 2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load. 3. TTL output drive capability is 2 TTL (10 LS - TTL). MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com our changes complete and detailed datasheets. Contact us for yournotice. application specific requirements: MtronPTI MtronPTI reserves the right tofor make to offering the product(s) and service(s) described herein without No liability is assumed as a result of their1-800-762-8800. use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 94 Revision: 8-21-07 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.