2.12 2nd Generation DIP and Mini-DIP-IPM Features: • Ultra Compact Transfer Mold Package • Including Drive and Protection ICs (low and high voltage drive ICs) • Low and High Speed Types • All Mitsubishi DIP and Mini-DIP-IPMs have lead-free terminals • From January 2006 onwards, all DIP and Mini-DIP-IPMs will be supplied with completely lead-free technology Line-up DIP & Mini-DIP-IPM Type VCES (V) Isolation Voltage (Vrms) Motor Rating (kW) 0.1 0.2 0.4 Low speed fPWM 5kHz DIP 0.75 1.5 2.0 PS21244-EP PS21245-EP PS21246-EP PS21254-EP PS21255-EP 600 High speed fPWM 15kHz 2. 2500 Low speed fPWM 5kHz Mini DIP PS20341-GP PS20341-NP# PS21342-GP PS21342-NP# PS21343-GP PS21343-NP# PS20351-GP PS20351-NP# PS21351-NP# PS21352-GP PS21352-NP# PS21353-GP PS21353-NP# 500 / 600 High speed fPWM 15kHz : reduced t dead # Circuit Diagram www.mitsubishichips.com · www. mitsubishielectric.de 57 2.12 2nd Generation DIP and Mini-DIP-IPM (Dual-in-line Package Intelligent Power Modules) Electrical Characteristics Type Number Thermal & Mechanical Characteristics VCES (V) Applicable Motor Ratings (kW) Ic (A) fc (kHz) Isolation Voltage (V) P21244-EP 600 0.75 15 5 2500 PS21245-EP 600 1.5 20 5 PS21246-EP 600 2.0 25 5 PS21254-EP 600 0.75 15 PS21255-EP 600 1.5 PS20341-GP 500 PS20341-NP VCE(sat) @ Tj= 25ºC (V) IGBT FW-Diode Rth(c-f) PackageNo. Rth(j-c) Rth(j-c) Max. (ºC/W) (ºC/W) 1.55 - 2.85 4.5 0.067 D1 2500 1.55 - 2.20 4.5 0.067 D1 2500 1.55 - 2.10 3.0 0.067 D1 15 2500 1.80 - 2.85 4.5 0.067 D1 20 15 2500 1.80 - 2.20 4.5 0.067 D1 0.1 3 5 2500 1.40 1.90 7.0 8.0 - D2 500 0.1 3 5 2500 1.40 1.90 7.0 8.0 - D2 PS20351-GP 500 0.1 3 15 2500 1.70 2.35 7.0 8.0 - D2 PS20351-NP 500 0.1 3 15 2500 1.70 2.35 7.0 8.0 - D2 PS21342-GP 600 0.2 5 5 2500 1.55 2.15 6.0 6.5 - D2 PS21342-NP 600 0.2 5 5 2500 1.55 2.15 6.0 6.5 - D2 PS21343-GP 600 0.4 10 5 2500 1.55 2.15 5.0 6.5 - D2 PS21343-NP 600 0.4 10 5 2500 1.55 2.15 5.0 6.5 - D2 PS21351-NP 600 0.1 3 15 2500 1.80 2.45 7.0 8.0 - D2 PS21352-GP 600 0.2 5 15 2500 1.80 2.45 6.0 6.5 - D2 PS21352-NP 600 0.2 5 15 2500 1.80 2.45 6.0 6.5 - D2 PS21353-GP 600 0.4 10 15 2500 1.80 2.45 5.0 6.5 - D2 PS21353-NP 600 0.4 10 15 2500 1.80 2.45 5.0 6.5 - D2 Typ. (ºC/W) 600V DIP-IPMs 500V / 600V Mini-DIP-IPMs 2. Package D1 Package D2 Note1: (***) = Dummy Pin. Note 2: In order to increase the surface distance between terminals, cut a slit, etc. on the PCB surface Dimensions in mm 58 Power Devices General Catalogue 2005