Technical Data: Insertion/withdrawel force per contact: Mechanical operations: Contact resistance: ≤ 10N / ≤ 1,6N ≥ 500 ≤ 1 mOhm Operation Temperature: -55°C - +125°C Solder temperature: Suitable assembly process: according JEDEC 020C leadfree wave / reflow soldering RoHS compliance: yes (6/6) Designed for use with: right angle male DIN connector straight male 2mm HM connector Packaging: Packaging unit: Marking of packaging: antistatic plastic bag 100 pieces per bag label or direct printed on bag required date see ERNI labeling spec. 254792 +0,5 A 3,6 -0,05 1,6 -0,6 4,8 22,4 -0,2 +0,1 2,31 -0,08 9,5 +0,15 Current Cable cross area 10 A 1,5 mm² 20 A 4 mm² 30 A 6 mm² 40 A 10 mm² Missing informations and dimensions see at DIN 41626 Masse nur informatorisch, keine Prüfpläne erstellen. Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. M 2:1 AWG 16 12 10 8 594231 1 40 A 594229 1 20 A 594227 1 10 A 1,45 +0,4 294841 1 40 A 4,8 -0,4 033319 1 30 A 294840 1 20 A 294839 1 10 A Part-No. Class Current Tolerances Information: 4,8 -0,4 1,5-2,5 µm Cu, 2-3 µmNiP+ , 0,15 µm Au 2 - 3 µm Ni min. 1,3 µm Au 2,25 +0,6 3,55 2,25 +0,6 1,45 +0,4 Plating ØA 5:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. High Current Male Contact Crimp Termination 053310 www.ERNI.com E 02.06.2008 Index Date Class STVSKO I A3