AMC-V7-2C6670 DATASHEET A high performance AMC card based on a Xilinx Virtex-7 and TI’s TMS320C6670 DSPs, with high speed, flexible I/O 8 DSP cores with shared memory and additional wireless accelerators, ideal for a range of high performance DSP applications Front panel I/O: 3x SFP+ to FPGA or DSPs. GPS receiver. Front panel or AMC clock sync Flexible, high bandwidth off-board communications via Gen2 Serial RapidIO KEY FEATURES RESULTING BENEFITS Xilinx Virtex-7 FPGA, XC7VX415T-2 Cost effective, high density device Dual TMS320C6670 quad-core DSPs The latest high performance TI DSPs Multiple banks of DDR3 SDRAM for both DSPs and FPGA Latest external memory technology with multiple high bandwidth buses Flash memory Stores multiple FPGA images & software IDT CPS-1848 Serial RapidIO switch SRIO V2.1 at up to 25 Gbaud per port On-board Ethernet switch Gigabit Ethernet to all main devices Separate “glue logic” for board configuration and management Allows control, FPGA configuration and FLASH reprogramming over SRIO/SPI Three front panel SFP+ optical interfaces, to the FPGA GTH or DSP AIF2 Flexible high-speed optical links, suitable for a range of applications Optional GPS receiver Highly accurate timing sync Timing and synchronisation from front panel or backplane clock I/O Syncs easily to other equipment Single width Full Size PICMG AMC.0 R2.0 Advanced Mezzanine Card Works with industry standard MicroTCA chassis; can also run standalone The CommAgility AMC-V7-2C6670 is a high performance DSP/FPGA based processing card in the extremely compact Advanced Mezzanine Card form factor. It is powered by two of the latest Texas Instruments TMS320C6670 DSPs plus a high-density Xilinx Virtex-7 FPGA. It is ideal for a range of high performance DSP/FPGA wireless processing applications including LTE, LTE Advanced and beyond. Serial RapidIO at up to 25 Gbaud per port is supported by an IDT CPS-1848 Gen2 SRIO switch. As standard, the board provides three front panel SFP+ optical interfaces that links either to the FPGA or to the DSP AIF2 ports. Timing and synchronisation is achieved via the front panel or backplane clock I/O, or optional GPS receiver. CommAgility Ltd [email protected] www.commagility.com Tel: +44 1509 228866 DSP: 2 x TMS320C6670 Rev 2 DSPs, each with: 1.2 GHz clock speed 2 Gbytes x64 DDR3-1333 SDRAM 20 Gbaud, 4x SRIO V2.1 link to switch 10 Gbaud, 2x PCI Express link to FPGA Hyperlink50 bus (to other DSP) Single Gigabit Ethernet link to switch FPGA: Xilinx Virtex-7TM X415T-2 FPGA 512 Mbytes x16 DDR3-800 SDRAM 1 Gbyte x32 DDR3-1250 SDRAM 256 Mbytes x16 NOR FLASH Dual 20 Gbaud 4x SRIO V2.1 to switch Three Gigabit Ethernet links to switch 4x GTX to AMC ports 20-17 Configuration from FLASH or SRIO Glue: Embedded glue logic for configuration of FPGA, general board control, Flash update. Controlled from SRIO or SPI. Timing: Front panel clock input or output AMC Telecom clock A-D support Optional GPS receiver for timing sync Configurable PLL and jitter cleaner based on TI CDCE62005 device Front panel I/O: 3x SFP+ to FPGA at up to 10.3 Gbaud Alternative build option, 3x SFP+ to DSP AIF2 at up to 5 Gbaud SMB for sync clock I/O Debug: Breakout board for debug and RS-232 Separate FPGA JTAG debug connector RS-232 headers, LEDs for each DSP Optional MICTOR connector to FPGA Module Management Controller: AMC.0 IPMB_L, FRU EEPROM data Power & reset, health monitoring ENVIRONMENT/EMC/SAFETY Operating temp: 0-40°C ambient Power consumption: up to 50W max Designed for NEBS/ETSI compliance when used in appropriate chassis 2004/108/EC and FCC EMC compliant 2011/65/EU RoHS, 2012/19/EU WEEE and 2006/95/EC LVD compliant SOFTWARE Management: Full embedded suite based on Pigeon PointTM Software FPGA: Xilinx ISE/EDK project to show functionality; full MicroBlaze BSL DSP: Full DSP Board Support Libraries AMC-V7-2C6670 HARDWARE SPECIFICATIONS Form Factor and Backplane: Single-width, full-size Advanced Mezzanine Card, AMC.0 Rev 2.0 compliant IDT CPS-1848TM Rev C switch for AMC.4 compliant 25 Gbaud x4 connections to AMC ports 4-7 and 8-11 Broadcom BCM5389 switch for AMC.2 compliant GigE to AMC Ports 0 and 1 Hot swap support Contact CommAgility for further details of software partners. OEM PARTNERSHIP SERVICES: IN DEVELOPMENT: Support and training; hardware customisation; software and FPGA development. IN PRODUCTION: lead-time reduction; extended warranty; and repair; quick turn repairs and/or spares stocking. EXTENDED LIFE: obsolescence management; guaranteed lifecycle; Escrow. LICENSING can be offered for high volume projects. CommAgility Ltd, Loughborough, UK Tel: +44 1509 228866 [email protected] www.commagility.com Datasheet describes products in development; Information may change. AMC-V7-2C6670 P2/0114